donelogger 0.1.9

Time long-running steps with two ordinary log lines: write [Start] and [Done], get the elapsed time filled in for you.

donelogger

Time long-running steps with two ordinary log lines.

Write [Start] when work begins and [Done] when it ends. donelogger fills the elapsed time into the log line for you.

from donelogger import getLogger

logger = getLogger()

logger.info("[Start] Training model...")
train()
logger.info("[Done] Finished")
# -> +[Go Job] Training model...
# -> -[Done Job(1m23.40s)] Finished     ← elapsed time, measured for you

That's the whole idea: no time.perf_counter() variables, no manual subtraction, no f"{...:.3f}s" formatting scattered through your code.

If you've ever written this:

t0 = time.perf_counter()
logger.info("Loading dataset...")
load_dataset()
logger.info(f"Finished loading in {time.perf_counter() - t0:.3f}s")

you can write this instead:

logger.info("[Start] Loading dataset...")
load_dataset()
logger.info("[Done] Finished loading")
# -> -[Done Job(2.413s)] Finished loading

The timing is just part of the log. Your call sites stay plain logger.info(...), and everything that is not a marker remains a normal log message.

No tag needed for the basic case. When you want to time nested or overlapping steps, add an optional :tag ([Start:train] ... [Done:train]).

Battle-tested: donelogger runs in production internal tooling, where knowing "how long did each stage take?" across a long pipeline matters every day.

---

Installation

pip install donelogger

Why donelogger?

1. Make timing cheap enough to use everywhere

When timing is annoying, you only add it after something gets slow. donelogger makes it cheap enough to leave timing breadcrumbs throughout a script, CLI, batch job, ML run, or data pipeline:

logger.info("[Start] Download files")
download_files()
logger.info("[Done] Downloaded")

logger.info("[Start] Parse records")
parse_records()
logger.info("[Done] Parsed")

logger.info("[Start] Write output")
write_output()
logger.info("[Done] Wrote output")

You get readable progress logs while the job runs, and elapsed times once each step finishes. This pays off most once timings are nested — when you want an inner step's time and the whole job's time without scrolling back up the log to subtract two timestamps by hand. (See nested timing.)

2. Skip the logging setup boilerplate

Getting plain logging to print the way you want takes a handler, a formatter, a level, and a few lines of wiring before a single line shows up:

# Before — standard logging needs setup before it's usable
import logging, sys
logger = logging.getLogger("myapp")
logger.setLevel(logging.INFO)
handler = logging.StreamHandler(sys.stdout)
handler.setFormatter(logging.Formatter("%(asctime)s|%(levelname)s|%(message)s",
                                        "%d/%m/%Y %H:%M:%S"))
logger.addHandler(handler)

getLogger() does all of that for you — and hands back a real logging.Logger, so levels, file output, and custom formats keep working exactly as you'd expect:

# After — configured and ready in one line
from donelogger import getLogger
logger = getLogger()                      # console-ready, sensible defaults
logger = getLogger(logfile="app.log")     # ...also writes to a rotating file

Nothing proprietary to learn: it's logging underneath, just without the setup.

Features

• Zero-boilerplate timing — wrap work in [Start] / [Done]; the elapsed time is filled in for you, no tag required.
• One-line setup — getLogger() returns a ready-to-use, real logging.Logger; .info() / .warning() / .error() and named tags all work unchanged.
• Named & cross-module tags — time nested or overlapping stages independently, even starting in one file and finishing in another.
• Human-friendly durations — adaptive units from microseconds to hours (300us, 512.0ms, 1m15.40s), or force fixed seconds.
• Zero dependencies — pure standard library, with an optional one-argument rotating file log.

Usage

Default timer (no tag required)

Tags are optional. Bare [Start] / [Done] use a default timer named Job:

logger.info("[Start] Processing")
# ... work ...
logger.info("[Done] Complete")
# -> -[Done Job(512.0ms)] Complete

Named tags: time nested or overlapping work

Bare [Start] / [Done] track one thing at a time. Add a :tag to run several timers at once — ideal when you want an inner step's time and the overall time, without scrolling back up the log to subtract timestamps by hand:

logger.info("[Start:total] Pipeline starting")
logger.info("[Start:load]  Loading dataset...")
load_dataset()
logger.info("[Done:load]   Data ready")          # inner step time
train()
logger.info("[Done:total]  Pipeline finished")   # whole-pipeline time
# -> -[Done load(2.001s)] Data ready
# -> -[Done total(1m25.40s)] Pipeline finished

Timers are independent, so tags can nest (as above) or overlap freely without clobbering each other:

logger.info("[Start:download] Downloading files")
logger.info("[Start:parse]    Parsing config")
logger.info("[Done:parse]     Config ready")     # parse stops first
logger.info("[Done:download]  Files saved")      # download stops later

Cross-module timing

getLogger(name=...) returns the same logger instance for a given name (process-wide singleton), and the timer state lives on that logger. So any module that calls getLogger() with the same name shares the same timers — start in one file, finish in another:

# === data_loader.py ===
from donelogger import getLogger
getLogger().info("[Start:pipeline] Begin data pipeline")

# === trainer.py ===
from donelogger import getLogger
# ... after all stages finish ...
getLogger().info("[Done:pipeline] Pipeline complete")
# -> -[Done pipeline(42.300s)] Pipeline complete

Loggers created with different names keep independent timers, so unrelated components never clobber each other's tags.

Regular logging

Everything that isn't a marker passes straight through — donelogger is a normal logger:

logger.info("Just a normal message")
logger.warning("This is a warning")
logger.error("Something went wrong")

(Only INFO-level messages are scanned for markers; other levels are never touched.)

Choosing the elapsed-time format

elapsed_style controls how durations are rendered (default "adaptive"):

logger = getLogger(elapsed_style="adaptive")  # 300us, 512.0ms, 1.003s, 1m15.40s, 1h15m00s
logger = getLogger(elapsed_style="seconds")   # always seconds: 0.300s, 0.512s, 1.003s, 75.400s

File logging

Pass logfile= to also write to a rotating file (1 MB × 2 backups) with a detailed, machine-friendly format:

logger = getLogger(name="myapp", logfile="app.log")

Full configuration

import logging
from donelogger import getLogger

logger = getLogger(
    name="myapp",
    logLevel=logging.DEBUG,
    logfile="app.log",
    fmt="%(asctime)s|%(levelname)s|%(message)s",
    datefmt="%d/%m/%Y %H:%M:%S",
    elapsed_style="adaptive",
)

Marker syntax

Marker	Meaning
[Start] / [Go]	Start the default (Job) timer
[Start:tag] / [Go:tag]	Start a named timer
[Done]	Stop the default timer and print elapsed time
[Done:tag]	Stop a named timer and print elapsed time

• The keyword is case-insensitive (start, Start, go, Go, done, Done).
• A marker is only recognized at the very beginning of the message.
• [Done:tag] without a prior [Start:tag] emits *LOG ERROR* (tag is not started) {...} so mistakes are obvious.
• A tag is not consumed on [Done], so you can stop the same tag more than once (each reports elapsed since its [Start]).

Output format

+[Go data_load] Loading dataset...      ← '+' = timer started
-[Done data_load(2.001s)] Finished      ← '-' = timer stopped, elapsed shown

adaptive (default) picks a unit by magnitude:

Duration	Rendered
300 µs	300us
5 ms	5.0ms
0.512 s	512.0ms
1.003 s	1.003s
75.4 s	1m15.40s
4500 s	1h15m00s

seconds always uses seconds (handy when you post-process logs):

Duration	Rendered
0.005 s	0.005s
75.4 s	1m15.400s
4500 s	75m00.000s

API

getLogger(name="doneLogger", logLevel=logging.INFO, logfile=None, fmt=..., datefmt=..., elapsed_style="adaptive")

Returns a configured logging.Logger. Calling it again with the same name returns the cached instance (so configuration only happens once).

Parameter	Default	Description
name	"doneLogger"	Logger name. Same name → same instance (and shared timers). "root" configures the root logger.
logLevel	logging.INFO	Level for the console handler / logger.
logfile	None	If set, also log to this file via a rotating handler (1 MB × 2 backups).
fmt	%(asctime)s|%(levelname)s|%(message)s	Console log format (standard logging format string).
datefmt	%d/%m/%Y %H:%M:%S	Timestamp format.
elapsed_style	"adaptive"	"adaptive" (µs→h) or "seconds" (always seconds).

The package also exposes DoneloggerFormatter, DoneloggerStreamHandler, and LoggerManager for advanced/custom wiring. DoneloggerFormatter is a drop-in logging.Formatter (the standard fmt / datefmt / style arguments still work), with one extra keyword-only argument, elapsed_style.

How it works

donelogger installs a custom logging.Formatter that inspects each INFO message. A [Start]/[Go] marker records time.perf_counter() under the tag; the matching [Done] looks it up, computes the delta, and rewrites the line with the elapsed time. Because it's all in the formatter, your call sites stay plain logger.info(...) calls and non-marker logging is unaffected.

Testing

python -m unittest discover

The suite is dependency-free and mocks time.perf_counter, so the timing assertions are deterministic (no sleep, no flakiness).

Releasing

Maintainers: see RELEASING.md. Releases publish to PyPI automatically via GitHub Actions when a GitHub Release is published.

License

MIT