flac-detective 0.15.0

Advanced FLAC authenticity analyzer - Detects MP3-to-FLAC transcodes with high precision

🎵 FLAC Detective

Advanced FLAC Authenticity Analyzer for Detecting MP3-to-FLAC Transcodes

FLAC Detective is a professional-grade command-line tool that analyzes FLAC audio files to detect MP3-to-FLAC transcodes with high precision. Using spectral analysis, an 11-rule scoring system and an optional CNN classifier, it helps you keep your lossless music collection genuinely lossless.

---

🔍 How it works

Transcode an MP3 back to FLAC and the file is lossless as a container — but the audio already went through a lossy codec, and that leaves fingerprints. The clearest is a spectral cliff: MP3 discards everything above a bitrate-dependent frequency (~16 kHz at 128 kbps, ~20 kHz at 320), so the spectrum falls off a wall where a real recording keeps going.

FLAC Detective scores each file with 11 heuristic rules built around that idea — cutoff frequency vs. sample rate, MP3-bitrate signatures, compression artefacts (pre-echo, aliasing), bitrate sanity — plus protection rules so genuine vinyl rips, cassette transfers and naturally quiet recordings aren't flagged. An optional 12th rule is a small CNN (pip install "flac-detective[ml]") that sharpens borderline verdicts — measured, it raises confidence on already-suspect files far more than it catches fakes the heuristics miss outright. The rules sum to a 0–150 score and a 4-level verdict:

Verdict	Score	What to do
✅ AUTHENTIC	≤ 30	keep it
⚡ WARNING	31–60	borderline — check manually
⚠️ SUSPICIOUS	61–85	likely a transcode
❌ FAKE_CERTAIN	≥ 86	multiple indicators — definitely transcoded

The guiding principle throughout is "protect authentic files first": a false alarm on real music is worse than missing a borderline fake.

→ Every rule explained: Technical Details.

🤖 The ML side is a case study worth reading

Rule 12's model went through a real R&D saga, written up as a learning resource: a false-positive audit over 11 234 real FLACs, four dead-ends that didn't work (each instructive), a debunked "AUC 0.99" false discovery caught by cross-validation, and a twist where a "fundamental limit" turned out to be an artifact of listening in mono — fixed by going stereo.

📖 Read the ML detective story → — worth a look even if you never enable the ML extra.

🆕 Latest release — v0.14 (Stereo CNN)

The classifier now reads the stereo mid + side channels instead of mono, fixing its weak spot on band-limited music (baroque, jazz, old recordings). Real-world specificity on a library of 11 234 authentic FLACs climbed from 80 % to 95 %:

	v0.12 (mono)	v0.14 (stereo + gate)
Specificity (authentic kept)	80 %	95 %
Transcode recall	87 %	94 %

Full version-by-version history → CHANGELOG.

---

✨ Key Features

• 🎯 High Precision Detection: 11-rule scoring system with intelligent protection mechanisms
• 📊 4-Level Verdict System: Clear confidence ratings from AUTHENTIC to FAKE_CERTAIN
• ⚡ Performance Optimized: 80% faster than baseline through smart caching and parallel processing
• 🔍 Advanced Analysis: Spectral analysis, compression artifact detection, and multi-segment validation
• 🛡️ Protection Layers: Prevents false positives for vinyl rips, cassette transfers, and high-quality MP3s
• 📝 Flexible Output: Console reports with Rich formatting, JSON export, and detailed logging
• 🔧 Robust Error Handling: Automatic retries, partial file reading, and comprehensive diagnostic tracking
• 🔨 Automatic Repair: Corrupted FLAC files are automatically repaired with full metadata preservation
• 🤖 CNN classifier (optional): A small ML model bundled with the package adds a 12th scoring rule on borderline cases. pip install "flac-detective[ml]" to enable.

---

🚀 Quick Start

Installation

# Install via pip (Recommended)
pip install flac-detective

# OR with the optional CNN classifier (Rule 12)
pip install "flac-detective[ml]"

# OR run with Docker (multi-arch: linux/amd64 + linux/arm64)
docker pull ghcr.io/guillain-rdcde/flac_detective:latest

Upgrading to the latest version

pip install flac-detective does not upgrade an existing install — if you already have an older version, pip prints Requirement already satisfied and exits without doing anything. To get the latest release, add the --upgrade flag (short form -U):

# Upgrade to the latest version on PyPI
pip install --upgrade flac-detective

# Same thing with the optional ML extra
pip install --upgrade "flac-detective[ml]"

# Verify the new version
flac-detective --version

# Docker: pull again to refresh the image
docker pull ghcr.io/guillain-rdcde/flac_detective:latest

📦 See Getting Started for complete installation instructions.

Basic Usage

# Analyze current directory
flac-detective .

# Analyze specific directory
flac-detective /path/to/music

# Interactive mode (prompts for paths, accepts drag-and-drop in Windows cmd)
flac-detective

Common Options

# Show version and help
flac-detective --version
flac-detective --help

# Verbose log + JSON output to a custom path
flac-detective -v --format json --output report.json /music

# Quick scan (15 s sample instead of default 30 s)
flac-detective --sample-duration 15 /music

📖 See User Guide for detailed usage examples and command line options.

Try it Now (No Installation Required)

Option 1: Docker with Sample File

# Download a sample FLAC file (public domain)
curl -O https://archive.org/download/test_flac/sample.flac

# Run analysis with Docker (mount current directory)
docker run --rm -v "$(pwd)":/data ghcr.io/guillain-rdcde/flac_detective:latest /data/sample.flac

Option 2: Quick Python Test

# Using Python (if you have pip installed)
pip install flac-detective
flac-detective --version
flac-detective --help

Option 3: Interactive Demo Script ⭐ (Best for Quick Test)

# Clone and run demo with synthetic test files
git clone https://github.com/Guillain-RDCDE/FLAC_Detective.git
cd FLAC_Detective
pip install -e .
python examples/quick_test.py

This creates test files and shows FLAC Detective in action in 30 seconds!

Option 4: GitHub Codespaces (Fully Interactive Online)

1. Click the "Code" button → "Codespaces" → "Create codespace"
2. Wait for environment setup (~30 seconds)
3. Run: pip install -e . && python examples/quick_test.py

No sample files? The tool works with any FLAC file from your music collection!

---

🎬 Demo

Live Demo

Watch FLAC Detective analyze files with real-time progress bars and colored output!

Example Output

======================================================================
  FLAC AUTHENTICITY ANALYZER
  Detection of MP3s transcoded to FLAC
======================================================================

⠋ Analyzing audio files... ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━  15% 0:02:34

======================================================================
  ANALYSIS COMPLETE
======================================================================
  FLAC files analyzed: 245
  Authentic files: 215 (87.8%)
  Fake/Suspicious files: 12 (4.9%)
  Text report: flac_report_20251220_143022.txt
======================================================================

---

⚡ Performance

FLAC Detective is optimized for both speed and accuracy:

• Speed: 2-5 seconds per file (30s sample, default)
• Throughput: 700-1,800 files/hour on modern hardware
• Memory: ~150-300 MB peak usage
• Optimization: 80% faster than baseline through intelligent caching and parallel processing
• Scalability: Handles libraries with 10,000+ files efficiently

Customizable Performance:

# Faster analysis (15s per file) - good for quick scans
flac-detective /music --sample-duration 15

# Balanced (30s per file) - default, recommended
flac-detective /music

# More thorough (60s per file) - maximum accuracy
flac-detective /music --sample-duration 60

---

❓ Frequently Asked Questions

Does it work on Windows/Mac/Linux?

Yes! FLAC Detective is cross-platform and works on:

• ✅ Windows (7, 10, 11)
• ✅ macOS (10.14+)
• ✅ Linux (all major distributions)

How accurate is the detection?

FLAC Detective uses an 11-rule scoring system with protection layers:

• High confidence: >95% accuracy for AUTHENTIC and FAKE_CERTAIN verdicts
• Protection mechanisms: Prevents false positives for vinyl rips, cassette transfers, and high-quality sources
• 4-level system: AUTHENTIC, WARNING, SUSPICIOUS, FAKE_CERTAIN for nuanced results
• Known blind spot (be honest): high-bitrate AAC and VBR transcodes, and transcodes of already band-limited recordings (baroque, historical, acoustic), are hard for any spectral tool to detect. On such material, treat AUTHENTIC as "no evidence of transcoding" rather than a guarantee.

Will it damage or modify my files?

No! FLAC Detective is read-only by default:

• ✅ Only analyzes files, never modifies them
• ✅ Safe for your entire music collection
• ✅ Optional --repair flag for corrupted files (preserves all metadata)

Can I trust the results?

Yes, but use common sense:

• ✅ AUTHENTIC (score ≤30): Very high confidence, keep the file
• ⚡ WARNING (31-60): Borderline case, manual verification recommended
• ⚠️ SUSPICIOUS (61-85): High confidence transcode, consider replacing
• ❌ FAKE_CERTAIN (≥86): Multiple indicators, definitely a transcode

For critical decisions, use complementary tools (e.g., Spek for visual spectral analysis) to confirm.

What file formats are supported?

Currently:

• ✅ FLAC files (.flac)
• 🔜 Future: WAV, ALAC, APE (planned for v1.0)

How long does analysis take?

• Single file: 2-5 seconds (30s sample)
• 100 files: ~5-10 minutes
• 1,000 files: ~50-90 minutes
• 10,000 files: ~8-15 hours

Use --sample-duration 15 for faster scans of large libraries.

Can I use it in my own application?

Yes! FLAC Detective provides a Python API:

from flac_detective import FLACAnalyzer

analyzer = FLACAnalyzer()
result = analyzer.analyze_file("song.flac")
print(result['verdict'])  # AUTHENTIC, WARNING, SUSPICIOUS, or FAKE_CERTAIN

See examples/ directory for integration examples.

Is it free and open source?

Yes! MIT License:

• ✅ Free for personal and commercial use
• ✅ Open source on GitHub
• ✅ Contributions welcome

How can I contribute?

See CONTRIBUTING.md for:

• Bug reports and feature requests
• Code contributions
• Documentation improvements
• Testing and feedback

---

📚 Documentation

Detailed documentation is available in the docs/ directory:

• Documentation Index - Overview and navigation
• Getting Started - Installation and first analysis
• User Guide - Complete usage guide with examples
• Technical Details - Deep dive into detection rules and algorithms
• API Reference - Python API documentation
• Contributing - Development guide

---

🎯 Use Cases

• Library Maintenance: Clean your music collection of fake lossless files
• Quality Verification: Validate FLAC authenticity before archiving
• Batch Processing: Analyze large music libraries efficiently
• Format Validation: Ensure genuine lossless quality for critical listening

💡 Quick Examples

See the examples/ directory for ready-to-run scripts:

• basic_usage.py - Simple file and directory analysis
• batch_processing.py - Process multiple directories with statistics
• json_export.py - Export results to JSON for further processing
• api_integration.py - Advanced API usage and integration patterns

---

🤝 Contributing

Contributions are welcome! Please read our CONTRIBUTING.md for detailed guidelines and CODE_OF_CONDUCT.md for community standards.

---

🔒 Security

For security policy and vulnerability reporting, please see SECURITY.md.

---

📝 License

This project is licensed under the MIT License - see the LICENSE file for details.

---

📞 Support

• Issues: GitHub Issues
• Discussions: GitHub Discussions
• Security: see SECURITY.md

---

🙏 Acknowledgements

Thanks to the community members who took the time to report bugs and confirm fixes — first issues are special.

• @GearKite — Filed #7 with a clean traceback that pinpointed the circular import in v0.9.6, and #6 spotting the underscore-vs-dash Docker image name.
• @Aakiles — Diagnosed the circular import end-to-end and shipped a working patch via comment. The v0.9.7 fix is a refinement of his approach.
• @AnotherMuggle and @tomelephant-git — Confirmed the fix across operating systems, including Windows 11 LTSC.
• @AKHwyJunkie — Confirmed the v0.9.6 import crash, validating @GearKite's report.
• @pblue3 — First reported the Docker image inaccessibility (#6).

---

⭐ Star History

---

FLAC Detective - Maintaining authentic lossless audio collections