gridworks-base 0.5.2

Gridworks Base

GridWorks Base

gridworks-base (module gwbase) is the shared foundation for the GridWorks GNode service fleet — the RabbitMQ-transport actor framework and the single source of truth for the broker topology. Its defining commitment is a strict separation between transport and codec: the transport routes raw bytes; the Sema codec encodes/decodes typed messages; the boundary between them is one RoutingEnvelope + a bytes payload.

Services import it as a package and subclass the tier that matches what they are: GNode services (gridworks-ltn ltn, gridworks-marketmaker mm, the weather/price forecast services) subclass GridworksActor; non-GNode rabbit consumers (gridworks-journalkeeper, gridworks-ear's actor side) subclass ActorBase directly with no GNode identity. The routing taxonomy for all of them lives here in gwbase.topology.

This repo provides two things:

1. The gwbase package — a three-tier actor hierarchy (ActorBase → Orchestrator → GridworksActor) and gwbase.topology (the broker fabric). Install with pip install gridworks-base. See Actor tiers, settings & file locations below.
2. Dev-broker scripts — run a local RabbitMQ broker for development (below).

Dev Rabbit Broker

GridWorks services that use the AMQP transport require a running RabbitMQ dev broker to pass tests or run dev simulations. (SCADA is the exception — it is MQTT-native, with no AMQP exchanges.) Instructions for setting it up:

• Make sure you have docker installed
• Start the dev broker in a docker container — ./arm.sh or ./x86.sh (identical now: both pull the same multi-arch image ghcr.io/thegridelectric/dev-rabbit, arm64 + amd64; Docker selects your architecture automatically). The image bakes the generated broker definitions, so no extra setup is needed to get the right exchanges.

Note those scripts are just aliases so one doesn't need to remember the docker incantation. Also, if you have an older version of docker, you may need to use docker-compose instead of docker compose. That should also work.

Tests for success:

1. go to http://localhost:15672/ - it should look like this:

- Username/password for the dev rabbit broker: smqPublic/smqPublic - [More info]](https://gridworks.readthedocs.io/en/latest/gridworks-broker.html) on the GridWorks use of rabbit brokers

2. Test mqtt access via mqtt_sub:

mosquitto_sub -h localhost -p 1885 -u smqPublic -P smqPublic -t "#" -v

and go to http://localhost:15672/queues to confirm a new queue has showed up

docker exec -it gw-dev-rabbit rabbitmq-plugins list

And confirm rabbitmq_mqtt and rabbitmq_management appear as enabled ([E*]).

3. Confirm the baked broker definitions loaded — the exchanges and the smqPublic user come from inside the image (generated from gwbase.topology):

# exchanges live in the d1__1 vhost (not the default "/"):
docker exec gw-dev-rabbit rabbitmqctl list_exchanges -p d1__1 | grep -E 'ltn_tx|super_tx|ear_tx'
docker exec gw-dev-rabbit rabbitmqctl list_users   # expect smqPublic

4. tests pass

uv sync --all-groups
uv run pytest -v

This repository uses uv for package and environment management (pyproject.toml + uv.lock). Common tasks:

uv run pytest          # tests
uv run ruff check .    # lint
uv run ruff format .   # format
uv run mypy src        # type-check

nox sessions (nox -s tests|lint|mypy|xdoctest|docs-build) are an optional convenience wrapper over the same uv run commands; install nox globally (e.g. uv tool install nox) to use them. CI runs the uv run commands directly.

Building & publishing the dev-broker image (GHCR)

This repo is the build-and-publish home for the GridWorks dev-broker image. It is published public on GHCR (ghcr.io/thegridelectric/dev-rabbit), so any GridWorks repo — and their CI — can docker pull it (or use it as a CI service container) with no auth and no gridworks-base checkout. The broker fabric is baked in, so every consumer gets the exact same exchanges/bindings.

arm.sh / x86.sh pull this prebuilt multi-arch image, which bakes the generated broker definitions onto official RabbitMQ (rabbit/Dockerfile). The definitions are generated from gwbase.topology (single source of truth; a drift guard keeps the committed rabbit/rabbitconfig/*_definitions.json in sync). You only rebuild/push the image when the definitions, conf, or plugins change.

Automatic (CI): .github/workflows/broker-image.yml builds and pushes the image on a push to main/dev that touches the baked inputs, gated by the definitions drift check (gen_definitions.py --check). Usually you do not push by hand.

Manual (seed / local):

# one-time: a buildx builder that can do multi-arch. The default "docker"
# driver CANNOT — it errors "Multi-platform build is not supported for the
# docker driver". Create a docker-container builder instead:
docker buildx create --name gw --driver docker-container --use
docker buildx inspect --bootstrap

# one-time: log in to GHCR with a GitHub PAT (classic) that has
# write:packages (your account needs write access to the thegridelectric org):
echo "$GHCR_PAT" | docker login ghcr.io -u <github-username> --password-stdin

# build + push (run on a clean tree so the tag is chaos__<short-sha>__<date>,
# not chaos__dev):
./rabbit/build-and-push.sh

After the first push the package is private — set it Public (GitHub → thegridelectric → Packages → dev-rabbit → Package settings → Change visibility) so any machine can docker pull without auth. Then verify both arches are published:

docker buildx imagetools inspect ghcr.io/thegridelectric/dev-rabbit:latest
# expect: linux/amd64 and linux/arm64/v8

For a quick local-only test without pushing, build just your host arch: docker build -f rabbit/Dockerfile -t dev-rabbit-local .

Hello Rabbit

hello_rabbit.py is a two-actor demo: a tiny Supervisor pings a HelloGNode, which pongs back over the dev broker. Start the dev broker (above), then run it from the repo root:

uv run python hello_rabbit.py

Read it alongside src/gwbase/actor_base.py (transport / ear-tap), src/gwbase/orchestrator.py (class-routing + heartbeat / simulated time), and src/gwbase/gridworks_actor.py (GNode identity). The message types it sends are defined in the Sema codec (src/gwbase/sema/), which is the registry GridworksActor decodes against.

Actor tiers, settings & file locations

An actor rides the tier that matches what it is:

• ActorBase — raw rabbit + sema toolkit; a passive ear-tap. Rides ServiceSettings, carries no GNode identity. For non-GNode consumers (journalkeeper, ear's actor side, audit taps).
• Orchestrator — adds class-routing (a transport_class) plus the heartbeat / simulated-time rhythm. For Supervisor and TimeCoordinator, which are not GNodes.
• GridworksActor — adds GNode identity, loaded and Sema-validated from a g.node.gt.json file at boot. For SCADA, LTN, MarketMaker, forecast services.

Settings

ServiceSettings is the minimum to construct any actor; GNodeSettings extends it with the GNode file path. All fields read from the GWBASE_ env prefix (e.g. GWBASE_SERVICE_ALIAS, GWBASE_RABBIT__URL):

Field	Meaning
service_alias	routable address, e.g. d1.iso.me.scada (required)
instance_id	per-process UUID, auto-generated each boot if unset
service_name	directory segment for file locations (e.g. scada)
log_level	INFO by default
log_rotate_bytes / log_rotate_count	log rotation (10 MB × 5 default)
g_node_path (GNodeSettings)	path to g.node.gt.json

File locations (XDG Base Directory)

gwbase follows the XDG Base Directory convention, keyed on service_name — no root or /etc needed. With the XDG_*_HOME variables unset these default under ~/.config, ~/.local/share, ~/.local/state:

Kind	Path
config	$XDG_CONFIG_HOME/gridworks/<service_name>/
g.node.gt.json	$XDG_CONFIG_HOME/gridworks/<service_name>/g.node.gt.json
data	$XDG_DATA_HOME/gridworks/<service_name>/
state	$XDG_STATE_HOME/gridworks/<service_name>/
logs	$XDG_STATE_HOME/gridworks/<service_name>/log/<service_alias>.log

So on a Raspberry Pi a scada (service_name=scada, alias d1.iso.me.scada) logs to ~/.local/state/gridworks/scada/log/d1.iso.me.scada.log. Each actor gets a contextualized logger writing a grep-friendly, tail -f-friendly line format; a RotatingFileHandler caps it per log_rotate_*.

Try it

From the repo root — no broker needed (this only builds an actor and writes a log line):

uv run python - <<'PY'
from gwbase import ActorBase, ServiceSettings
from gwbase.config import paths

class Tap(ActorBase):
    def dispatch_message(self, *, envelope, body): pass

t = Tap(settings=ServiceSettings(
    service_alias="d1.test", service_name="myservice", log_level="DEBUG"))
t.logger.info("it works", extra={"answer": 42})
print(paths.log_dir("myservice") / "d1.test.log")
PY

Then read the log it points at:

cat ~/.local/state/gridworks/myservice/log/d1.test.log

Distributed under the terms of the MIT license, Gridworks Base is free and open source software.