imbrium 
Status
| Build | Status |
|---|---|
MAIN BUILD |
 |
DEV BUILD |
 |
Pip install
pip install imbrium
Standard and Hybrid Deep Learning Multivariate-Multi-Step & Univariate-Multi-Step Time Series Forecasting.
██╗███╗░░░███╗██████╗░██████╗░██╗██╗░░░██╗███╗░░░███╗
║████╗░████║██╔══██╗██╔══██╗██║██║░░░██║████╗░████║
██║██╔████╔██║██████╦╝██████╔╝██║██║░░░██║██╔████╔██║
██║██║╚██╔╝██║██╔══██╗██╔══██╗██║██║░░░██║██║╚██╔╝██║
██║██║░╚═╝░██║██████╦╝██║░░██║██║╚██████╔╝██║░╚═╝░██║
╚═╝╚═╝░░░░░╚═╝╚═════╝░╚═╝░░╚═╝╚═╝░╚═════╝░╚═╝░░░░░╚═╝
Introduction to imbrium
imbrium is a deep learning library that specializes in time series forecasting. Its primary objective is to provide a user-friendly repository of deep learning architectures for this purpose. The focus is on simplifying the process of creating and applying these architectures, with the goal of allowing users to create complex architectures without having to build them from scratch. Instead, the emphasis shifts to high-level configuration of the architectures.
imbrium Summary
imbrium is designed to simplify the application of deep learning models for time series forecasting. The library offers a variety of pre-built architectures. The user retains full control over the configuration of each layer, including the number of neurons, the type of activation function, loss function, optimizer, and metrics applied. This allows for the flexibility to adapt the architecture to the specific needs of the forecast task at hand. Imbrium also offers a user-friendly interface for training and evaluating these models, making it easy to quickly iterate and test different configurations.
imbrium uses the sliding window approach to generate forecasts. The sliding window approach in time series forecasting involves moving a fixed-size window - steps_past through historical data, using the data within the window as input features. The next data points outside the window are used as the target variables - steps_future. This method allows the model to learn sequential patterns and trends in the data, enabling accurate predictions for future points in the time series.
Get started with imbrium
Expand
Note, if you choose to use TensorBoard, run the following command to display the results:
tensorboard --logdir logs/
Univariate Pure Predictors
from imbrium import PureUni
# create a PureUni object (numpy array expected)
predictor = PureUni(target = target_numpy_array, evaluation_split = 0.1, validation_split = 0.2)
# the following models are available for a PureUni objects;
# create and fit a muti-layer perceptron model
predictor.create_fit_mlp(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
dense_block_one = 1,
dense_block_two = 1,
dense_block_three = 1,
layer_config = {
"layer0": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {"neurons": 50, "activation": "relu", "regularization": 0.0}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a recurrent neural network model
predictor.create_fit_rnn(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
rnn_block_one = 1,
rnn_block_two = 1,
rnn_block_three = 1,
metrics = "mean_squared_error",
layer_config = {
"layer0": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {"neurons": 50, "activation": "relu", "regularization": 0.0}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a long short-term neural network model
predictor.create_fit_lstm(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
lstm_block_one = 1,
lstm_block_two = 1,
lstm_block_three = 1,
layer_config = {
"layer0": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {"neurons": 50, "activation": "relu", "regularization": 0.0}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a convolutional neural network
predictor = create_fit_cnn(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
conv_block_one = 1,
conv_block_two = 1,
dense_block_one = 1,
layer_config = {
"layer0": {
"config": {
"filters": 64,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"filters": 32,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"pool_size": 2,
}
},
"layer3": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a gated recurrent unit neural network
predictor.create_fit_gru(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
gru_block_one = 1,
gru_block_two = 1,
gru_block_three = 1,
layer_config = {
"layer0": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a bidirectional recurrent neural network
predictor.create_fit_birnn(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
birnn_block_one = 1,
rnn_block_one = 1,
layer_config = {
"layer0": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a bidirectional long short-term memory neural network
predictor.create_fit_bilstm(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
bilstm_block_one = 1,
lstm_block_one = 1,
layer_config = {
"layer0": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a bidirectional gated recurrent neural network
predictor.create_fit_bigru(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
bigru_block_one = 1,
gru_block_one = 1,
layer_config = {
"layer0": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# you can add additional layer to the defualt layers by increasing the layer block count and adding the configuration for the layer in the layer_config dictionary. Please note that the last layer should not have a dropout key.
# in addition, you can add to all models early stopping arguments:
monitor='val_loss',
min_delta=0,
patience=0,
verbose=0,
mode='auto',
baseline=None,
restore_best_weights=False,
start_from_epoch=0
# instpect model structure
predictor.model_blueprint()
# evaluate model performance on testing data
predictor.evaluate_model(board=False)
# get model performance on testing data
predictor.show_evaluation()
# insptect keras model performances via (access dictionary via history key):
predictor.show_performance()
# make predictions via (numpy array expected):
predictor.predict(data)
# save predictor via:
predictor.freeze(absolute_path)
# load saved predictor via:
predictor.retrieve(location)
Multivariate Pure Predictors
from imbrium import PureMulti
# create a PureMulti object (numpy array expected)
predictor = PureMulti(target = target_numpy_array, features = features_numpy_array, evaluation_split = 0.1, validation_split = 0.2)
# the following models are available for a PureMulti objects;
# create and fit a muti-layer perceptron model
predictor.create_fit_mlp(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
dense_block_one = 1,
dense_block_two = 1,
dense_block_three = 1,
layer_config = {
"layer0": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {"neurons": 50, "activation": "relu", "regularization": 0.0}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a recurrent neural network model
predictor.create_fit_rnn(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
rnn_block_one = 1,
rnn_block_two = 1,
rnn_block_three = 1,
metrics = "mean_squared_error",
layer_config = {
"layer0": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {"neurons": 50, "activation": "relu", "regularization": 0.0}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a long short-term neural network model
predictor.create_fit_lstm(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
lstm_block_one = 1,
lstm_block_two = 1,
lstm_block_three = 1,
layer_config = {
"layer0": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {"neurons": 50, "activation": "relu", "regularization": 0.0}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a convolutional neural network
predictor = create_fit_cnn(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
conv_block_one = 1,
conv_block_two = 1,
dense_block_one = 1,
layer_config = {
"layer0": {
"config": {
"filters": 64,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"filters": 32,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"pool_size": 2,
}
},
"layer3": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a gated recurrent unit neural network
predictor.create_fit_gru(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
gru_block_one = 1,
gru_block_two = 1,
gru_block_three = 1,
layer_config = {
"layer0": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a bidirectional recurrent neural network
predictor.create_fit_birnn(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
birnn_block_one = 1,
rnn_block_one = 1,
layer_config = {
"layer0": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a bidirectional long short-term memory neural network
predictor.create_fit_bilstm(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
bilstm_block_one = 1,
lstm_block_one = 1,
layer_config = {
"layer0": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a bidirectional gated recurrent neural network
predictor.create_fit_bigru(
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
bigru_block_one = 1,
gru_block_one = 1,
layer_config = {
"layer0": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"neurons": 50,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# you can add additional layer to the defualt layers by increasing the layer block count and adding the configuration for the layer in the layer_config dictionary. Please note that the last layer should not have a dropout key.
# in addition, you can add to all models early stopping arguments:
monitor='val_loss',
min_delta=0,
patience=0,
verbose=0,
mode='auto',
baseline=None,
restore_best_weights=False,
start_from_epoch=0
# instpect model structure
predictor.model_blueprint()
# evaluate model performance on testing data
predictor.evaluate_model(board=False)
# get model performance on testing data
predictor.show_evaluation()
# insptect keras model performances via (access dictionary via history key):
predictor.show_performance()
# make predictions via (numpy array expected):
predictor.predict(data)
# save predictor via:
predictor.freeze(absolute_path)
# load saved predictor via:
predictor.retrieve(location)
Univariate Hybrid Predictors
from imbrium import HybridUni
# create a HybridUni object (numpy array expected)
predictor = HybridUni(target = target_numpy_array, evaluation_split = 0.1, validation_split = 0.2)
# the following models are available for a HybridUni objects:
# create and fit a convolutional recurrent neural network
predictor.create_fit_cnnrnn(
sub_seq,
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
conv_block_one = 1,
conv_block_two = 1,
rnn_block_one = 1,
rnn_block_two = 1,
layer_config = {
"layer0": {
"config": {
"filters": 64,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"filters": 32,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"pool_size": 2,
}
},
"layer3": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer4": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a convolutional long short-term memory neural network
predictor.create_fit_cnnlstm(
sub_seq,
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
conv_block_one = 1,
conv_block_two = 1,
lstm_block_one = 1,
lstm_block_two = 1,
layer_config = {
"layer0": {
"config": {
"filters": 64,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"filters": 32,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"pool_size": 2,
}
},
"layer3": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer4": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a convolutional gated recurrent unit neural network
predictor.create_fit_cnngru(
sub_seq,
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
conv_block_one = 1,
conv_block_two = 1,
gru_block_one = 1,
gru_block_two = 1,
layer_config = {
"layer0": {
"config": {
"filters": 64,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"filters": 32,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"pool_size": 2,
}
},
"layer3": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer4": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a convolutional bidirectional recurrent neural network
predictor.create_fit_cnnbirnn(
sub_seq,
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
conv_block_one = 1,
conv_block_two = 1,
birnn_block_one = 1,
rnn_block_one = 1,
layer_config = {
"layer0": {
"config": {
"filters": 64,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"filters": 32,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"pool_size": 2,
}
},
"layer3": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer4": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a convolutional bidirectional long short-term neural network
predictor.create_fit_cnnbilstm(
sub_seq,
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
conv_block_one = 1,
conv_block_two = 1,
bilstm_block_one = 1,
lstm_block_one = 1,
layer_config = {
"layer0": {
"config": {
"filters": 64,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"filters": 32,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"pool_size": 2,
}
},
"layer3": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer4": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a convolutional bidirectional gated recurrent neural network
predictor.create_fit_cnnbigru(
sub_seq,
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
conv_block_one = 1,
conv_block_two = 1,
bigru_block_one = 1,
gru_block_one = 1,
layer_config = {
"layer0": {
"config": {
"filters": 64,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"filters": 32,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"pool_size": 2,
}
},
"layer3": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer4": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# you can add additional layer to the defualt layers by increasing the layer block count and adding the configuration for the layer in the layer_config dictionary. Please note that the last layer should not have a dropout key.
# in addition, you can add to all models early stopping arguments:
monitor='val_loss',
min_delta=0,
patience=0,
verbose=0,
mode='auto',
baseline=None,
restore_best_weights=False,
start_from_epoch=0
# instpect model structure
predictor.model_blueprint()
# evaluate model performance on testing data
predictor.evaluate_model(board=False)
# get model performance on testing data
predictor.show_evaluation()
# insptect keras model performances via (access dictionary via history key):
predictor.show_performance()
# make predictions via (numpy array expected):
# - when loading/retrieving a saved model, provide sub_seq, steps_past, steps_future in the predict method!
predictor.predict(data, sub_seq=None, steps_past=None, steps_future=None)
# save predictor via:
predictor.freeze(absolute_path)
# load saved predictor via:
predictor.retrieve(location)
Multivariate Hybrid Predictors
from imbrium import HybridMulti
# create a HybridMulti object (numpy array expected)
predictor = HybridMulti(target = target_numpy_array, features = features_numpy_array, evaluation_split = 0.1, validation_split = 0.2)
# the following models are available for a HybridMulti objects:
# create and fit a convolutional recurrent neural network
predictor.create_fit_cnnrnn(
sub_seq,
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
conv_block_one = 1,
conv_block_two = 1,
rnn_block_one = 1,
rnn_block_two = 1,
layer_config = {
"layer0": {
"config": {
"filters": 64,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"filters": 32,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"pool_size": 2,
}
},
"layer3": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer4": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a convolutional long short-term memory neural network
predictor.create_fit_cnnlstm(
sub_seq,
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
conv_block_one = 1,
conv_block_two = 1,
lstm_block_one = 1,
lstm_block_two = 1,
layer_config = {
"layer0": {
"config": {
"filters": 64,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"filters": 32,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"pool_size": 2,
}
},
"layer3": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer4": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a convolutional gated recurrent unit neural network
predictor.create_fit_cnngru(
sub_seq,
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
conv_block_one = 1,
conv_block_two = 1,
gru_block_one = 1,
gru_block_two = 1,
layer_config = {
"layer0": {
"config": {
"filters": 64,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"filters": 32,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"pool_size": 2,
}
},
"layer3": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer4": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a convolutional bidirectional recurrent neural network
predictor.create_fit_cnnbirnn(
sub_seq,
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
conv_block_one = 1,
conv_block_two = 1,
birnn_block_one = 1,
rnn_block_one = 1,
layer_config = {
"layer0": {
"config": {
"filters": 64,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"filters": 32,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"pool_size": 2,
}
},
"layer3": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer4": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a convolutional bidirectional long short-term neural network
predictor.create_fit_cnnbilstm(
sub_seq,
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
conv_block_one = 1,
conv_block_two = 1,
bilstm_block_one = 1,
lstm_block_one = 1,
layer_config = {
"layer0": {
"config": {
"filters": 64,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"filters": 32,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"pool_size": 2,
}
},
"layer3": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer4": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# create and fit a convolutional bidirectional gated recurrent neural network
predictor.create_fit_cnnbigru(
sub_seq,
steps_past,
steps_future,
optimizer = "adam",
optimizer_args = None,
loss = "mean_squared_error",
metrics = "mean_squared_error",
conv_block_one = 1,
conv_block_two = 1,
bigru_block_one = 1,
gru_block_one = 1,
layer_config = {
"layer0": {
"config": {
"filters": 64,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer1": {
"config": {
"filters": 32,
"kernel_size": 1,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer2": {
"config": {
"pool_size": 2,
}
},
"layer3": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
"dropout": 0.0,
}
},
"layer4": {
"config": {
"neurons": 32,
"activation": "relu",
"regularization": 0.0,
}
},
},
epochs = 100,
batch_size = None,
show_progress = 1,
board = False,
)
# you can add additional layer to the defualt layers by increasing the layer block count and adding the configuration for the layer in the layer_config dictionary. Please note that the last layer should not have a dropout key.
# in addition, you can add to all models early stopping arguments:
monitor='val_loss',
min_delta=0,
patience=0,
verbose=0,
mode='auto',
baseline=None,
restore_best_weights=False,
start_from_epoch=0
# instpect model structure
predictor.model_blueprint()
# evaluate model performance on testing data
predictor.evaluate_model(board=False)
# get model performance on testing data
predictor.show_evaluation()
# insptect keras model performances via (access dictionary via history key):
predictor.show_performance()
# make predictions via (numpy array expected):
# - when loading/retrieving a saved model, provide sub_seq, steps_past, steps_future in the predict method!
predictor.predict(data, sub_seq=None, steps_past=None, steps_future=None)
# save predictor via:
predictor.freeze(absolute_path)
# load saved predictor via:
predictor.retrieve(location)
Use Case: scaling + hyper parameter optimization
https://github.com/maxmekiska/ImbriumTesting-Demo/blob/main/use-case-1.ipynb
Integration tests
https://github.com/maxmekiska/ImbriumTesting-Demo/blob/main/IntegrationTest.ipynb
References
Expand
Brwonlee, J., 2016. Display deep learning model training history in keras [Online]. Available from: https://machinelearningmastery.com/display-deep- learning-model-training-history-in-keras/.
Brwonlee, J., 2018a. How to develop convolutional neural network models for time series forecasting [Online]. Available from: https://machinelearningmastery.com/how-to-develop-convolutional- neural-network-models-for-time-series-forecasting/.
Brwonlee, J., 2018b. How to develop lstm models for time series forecasting [Online]. Available from: https://machinelearningmastery.com/how-to-develop- lstm-models-for-time-series-forecasting/.
Brwonlee, J., 2018c. How to develop multilayer perceptron models for time series forecasting [Online]. Available from: https://machinelearningmastery.com/how-to-develop-multilayer- perceptron-models-for-time-series-forecasting/.
1 maintainer
Metadata
1 maintainer
Release files for imbrium 3.1.0
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | |
|---|---|---|---|
| imbrium-3.1.0.tar.gz | 30.2 kB | Details |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Reset |
|---|---|---|---|---|
| imbrium-3.1.0-py3-none-any.whl | Python 3 | none | any | Details |
Total release size: 58.2 kB
Release files / imbrium-3.1.0.tar.gz
| Download URL | imbrium-3.1.0.tar.gz |
|---|---|
| Size | 30.2 kB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
c8df8729b9886e601fbc1e0af48d5d287fe0c597514a509e2213ab9e08717879
|
|
BLAKE2b-256 checksum How to use checksums |
68237ffc3dc41ad20b020ca8304ff9f7d9586fb59a60646dbfc8e15cc31133f1
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/5.0.0 CPython/3.9.13
|
Release files / imbrium-3.1.0-py3-none-any.whl
| Download URL | imbrium-3.1.0-py3-none-any.whl |
|---|---|
| Size | 28.0 kB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
fb2db4f8e9028d1209c902996d4806a86d1cc6534c8e4db23fcd13a2d76af18a
|
|
BLAKE2b-256 checksum How to use checksums |
4e2b9d1e0f38cc9d86931dec7347df509f1fc49665ad2b8727eb7c9cc5bfad92
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/5.0.0 CPython/3.9.13
|
