krabby-launcher 0.1.10

CLI for installing, updating, and running the Krabby locomotion stack

krabby-launcher

CLI for installing, updating, and running the Krabby locomotion stack on a Jetson Orin host.

PyPI package name is krabby-launcher (the krabby name was already taken); the installed command is still krabby.

Install

pip install krabby-launcher

Usage

krabby install            # pull release-latest, set up udev + dialout
krabby install --image <ref>   # pull a specific tag or digest

krabby update             # re-pull the last installed image
krabby update --image <ref>    # pull a different tag

krabby run                # full gamepad stack: HAL server + krabby-uno client + controller
krabby run --gamepad-only      # explicit alias for the gamepad stack
krabby run -- --device-id 1    # forward client args to krabby-uno (gamepad mode)
krabby run -- --checkpoint /path/to/ckpt.pt   # inference mode (policy checkpoint)

krabby firmware show           # run krabby-firmware show inside the container
krabby firmware show <branch>  # list a branch's builds newest-first, paged
krabby firmware update         # run krabby-firmware update inside the container
krabby firmware <args>         # any krabby-firmware subcommand/flags

krabby --version
krabby --help

krabby run starts the whole gamepad stack in one container — the HAL server and the krabby-uno client/controller together — so a paired gamepad drives the robot with a single command. To run just the client (e.g. the two-process debug flow), use the krabby-uno console script from the controller package (pip install krabby-controller) against the server's TCP endpoints (tcp://host:6001 / :6002).

Image refs

The default image is pulled from ECR:

public.ecr.aws/t7t7b3i3/krabby-locomotion:release-latest

release-latest tracks the newest release/* build — the stable channel for kit owners (CI moves the tag on each release build; see images/locomotion/README.md). Use --image mainline-latest to follow the development line instead.

A bare tag (e.g. --image v1.2.3) is expanded to the full ECR URI automatically. Pass a fully-qualified URI to use a different registry entirely.

State

The last installed image ref and digest are recorded at ~/.config/krabby/state.json. krabby update and krabby run read this file when --image is omitted.

GPU

On aarch64 (Jetson) the container is started with --runtime=nvidia. On x86_64 it uses --gpus all.

Firmware pass-through

There are two related but distinct commands — same flash CLI, different host requirements:

Command	Where it runs	When to use
krabby firmware <args>	the flash CLI inside the installed image	the normal path — no host flash tools needed (you only pip install krabby-launcher)
krabby-firmware <args>	the flash CLI directly on the host	running the firmware package standalone (pip install krabby-firmware), e.g. on a laptop without the locomotion image

krabby firmware forwards every argument verbatim to krabby-firmware in a transient container, mounts ~/.cache/krabby-firmware so cached artifacts are shared across runs, and passes serial devices (/dev/ttyACM*, /dev/ttyUSB*) through via --device. When your shell is interactive it allocates a TTY, so the interactive menu and paged show <branch> output behave the same as running krabby-firmware directly.