lerobot_robot_lekiwi_pincopen

My LeKiwi runs STS3250 servos on the big arm joints and a PincOpen gripper. This plugin lets the original, unmodified LeRobot (0.6.0 or newer) drive that hardware, zero source edits.

I wrote up the hardware build in Mobile Manipulation with LeKiwi + PincOpen. This package is that integration as installable code.

▶ click for the clip: autonomous SmolVLA rollout, pick up the chocolate bar from the basket and place it on the ground

vs the original lekiwi robot:

• STS3250 on the heavy arm joints, set by sts3250_joints (default: joints 2-4; shoulder_pan, wrist_roll and gripper are STS3215)
• load-based tuning via heavy_joints, independent of which servo is fitted
• PincOpen gripper: fixed EPROM calibration, skipped during interactive calibration
• tuned servo params written on every connect, all exposed as config fields: tuning is a yaml/CLI edit (--robot.heavy_p_coefficient=10), never a code change
• camera capture pinned to MJPG — the stock default sets no fourcc, so OpenCV auto-negotiates uncompressed YUYV (~147 Mbps/camera) and saturates the Pi's USB2 bus; MJPG is ~16× lighter for identical frames

Install

pip install lerobot_robot_lekiwi_pincopen

That pulls lerobot[lekiwi] with it, which brings the Feetech servo SDK the bus needs and pyzmq for the host. Requires Python 3.12 or newer, as lerobot does.

Nothing else to wire up: every lerobot CLI calls register_third_party_plugins(), which imports installed distributions named lerobot_robot_*, so the robot and teleoperator types below appear in --robot.type / --teleop.type as soon as the package is present.

To hack on it instead, from a clone:

pip install -e ".[dev]"

Use

LeRobot auto-discovers the plugin by its package name (the official third-party conventions):

# calibrate (gripper is skipped, its EPROM calibration is applied)
lerobot-calibrate --robot.type=lekiwi_pincopen --robot.id=my_lekiwi

# host (the original lekiwi_host skips plugin discovery, hence the wrapper; same CLI, same yaml)
python -m lerobot_robot_lekiwi_pincopen.lekiwi_host --config_path=host.yaml

The client side (teleop/record/eval) needs nothing from this package: lekiwi_client never touches motors.

Calibration files live under ~/.cache/huggingface/lerobot/calibration/robots/lekiwi_pincopen/.

Driving LeKiwi from the record / teleoperate CLIs

LeKiwi is a mobile manipulator, so it takes two devices to drive: a leader arm for the arm and a keyboard for the holonomic base. Stock lerobot-teleoperate cannot express that, and stock lerobot-record cannot talk to a LeKiwi client at all. The package ships two laptop-side types that close both gaps without patching lerobot:

• --robot.type=lekiwi_pincopen_client — the ZMQ client. Stock lerobot never registers lekiwi_client in the record/teleoperate scripts, so it is not a selectable choice there; and LeKiwiClient exposes no .cameras, so recording dies on len(robot.cameras) while sizing its image writer. This registers the client and reports the configured cameras.
• --teleop.type=lekiwi_pincopen_leader — one teleoperator wrapping the sprung SO-101 leader plus a keyboard for the base, the way bi_so_leader wraps two arms. The CLIs see a single ordinary teleoperator. WASD moves, Z/X rotate, R/F change speed.

robot:
  type: lekiwi_pincopen_client
  remote_ip: 192.168.0.42
  id: my_kiwi

teleop:
  type: lekiwi_pincopen_leader
  id: my_leader
  # See the note below: use an ABSOLUTE path.
  calibration_dir: /home/<you>/.cache/huggingface/lerobot/calibration/teleoperators/so101_leader
  arm_config:
    port: /dev/ttyACM0
  # Optional; these are the defaults.
  # teleop_keys: {forward: w, backward: s, left: a, right: d, rotate_left: z, rotate_right: x, speed_up: r, speed_down: f, quit: q}
  # speed_levels: [{xy: 0.1, theta: 30}, {xy: 0.2, theta: 60}, {xy: 0.3, theta: 90}]

Notes:

• Nothing changes on the robot/host side, so there is no need to redeploy the Pi.
• The arm keeps the teleoperator's own id unsuffixed, so an existing leader calibration keeps resolving. Migrating from --teleop.type=so101_leader_sprung is a type swap plus moving port under arm_config.
• The keyboard is best effort. pynput cannot capture keys on Wayland or on a headless machine; there the base holds still and the arm stays teleoperable rather than the session failing.
• Both are proposed upstream in huggingface/lerobot#3741.

Optional: sprung gripper trigger for the SO-101 leader

The package also ships --teleop.type=so101_leader_sprung: a stock SO-101 leader whose gripper trigger pushes back progressively when squeezed and springs back to fully open when released — the SO-arm analogue of the Koch leader's current-based-position trigger, emulated in the STS3215's position mode (soft P gain + low torque cap). Works with any SO-101/SO-100 leader, not just PincOpen setups.

teleop:
  type: so101_leader_sprung
  port: /dev/ttyACM0
  id: my_leader
  # calibration files are stored per teleoperator type; reuse an existing
  # so101_leader calibration instead of recalibrating. Use an ABSOLUTE path:
  # lerobot does not expand `~` in calibration_dir.
  calibration_dir: /home/<you>/.cache/huggingface/lerobot/calibration/teleoperators/so101_leader

Notes:

• Position reads are unchanged — recorded gripper actions are identical apart from a consistent open rest position between grasps.
• The spring's P_Coefficient write persists in the servo's EPROM (harmless; the servo behaves identically when used as a stock passive leader, since torque is off outside this teleoperator).
• Hand-tuned on real hardware; holding the trigger fully squeezed for 8 continuous minutes raised the servo temperature by 1 °C, and the factory overload protection stays armed above the configured torque cap.

Tuning

P=10 on the big joints is the load-bearing fix. The original writes P=16, which gave me jitter and servo overload shutdowns on this hardware.

Tests

pip install -e .[dev]
python -m pytest tests

No hardware needed, everything stops short of bus.connect().

Related

• Mobile Manipulation with LeKiwi + PincOpen: the hardware story
• lekiwi-tui: my terminal control center, ships and drives this plugin automatically

License

Apache-2.0. calibrate()/configure() derive from LeRobot (Apache-2.0, The HuggingFace Inc. team); see the file headers.