Lightweight Extensible Signal Transport
LXST is a simple and flexible real-time streaming format and delivery protocol that allows a wide variety of implementations, while using as little bandwidth as possible. It is built on top of Reticulum and offers zero-conf stream routing, end-to-end encryption and Forward Secrecy, and can be transported over any kind of medium that Reticulum supports.
- Cross-platform, works on Linux, Android, Windows and Mac
- Provides a variety of ready-to-use primitives, for easily creating applications such as:
- Telephony and live voice calls
- Two-way radio systems
- Direct peer-to-peer radio communications
- Trunked and routed real-time radio systems
- Media streaming
- Broadcast radio
- Public address systems
- Can handle real-time signal streams with end-to-end latencies below 10 milliseconds
- Supports encoding and decoding stream contents with a range of different codecs
- Raw and lossless streams with arbitrary sample rates
- Up to 32 channels
- Up to 128-bit sample precision
- Efficient, high-quality voice and audio with OPUS
- Many different built-in profiles, from ~4.5kbps to ~96kbps
- Profiles are pre-tuned for different applications, such as:
- Low-bandwidth voice
- Medium quality voice
- High quality, perceptually lossless voice
- Media content such as podcasts
- Perceptually lossless stereo music
- Ultra low-bandwidth voice communications with Codec2
- Provides intelligible voice between 700bps and 3200bps
- Raw and lossless streams with arbitrary sample rates
- Can dynamically switch codecs mid-stream without stream re-initialization or frame loss
- Has in-band signalling support for call signalling, communications, metadata embedding, media and stream management
- Uses a fully staged signal pipelining, allowing arbitrary stream routing
- Provides built-in signal mixing support for any number of channels
User-facing clients built on LXST include:
Transport Encryption
LXST uses encryption provided by Reticulum, and thus provides end-to-end encryption, guaranteed data integrity and authenticity, as well as forward secrecy by default.
Project Status & License
This software and its interfaces will change rapidly with ongoing development. Consider no APIs stable. Consider everything explosive. Not all features are implemented. Nothing is documented. For a fully functional LXST program, take a look at Sideband or the included rnphone program, which provides telephony service over Reticulum. Everything else will currently be a voyage of your own making.
The LXST project is available under a CC BY-NC-ND 4.0 license. You can use and deploy LXST freely for non-commercial, personal and humanitarian purposes, including in your own programs. At this point, no derivatives are allowed without an explicit license.
For commercial (including institutionalised educational) licensing, contact me.
LXST uses third-party codecs, and where included in source and binary distributions, these are distributed under their respective licenses:
- Parts of
pydub, under the MIT License, Copyright (c) 2011 James Robert. - The Ogg License
- The Opus License
- The Opusenc License
- The Opusfile License
- The Vorbis License
- The Flac License
Additionally, some parts of the platform abstraction code is released under the BSD 3-Clause license. See the relevant license headers for details.
Installation
If you want to try out LXST, you can install it with pip:
pip install lxst
On Raspberry Pi (assuming Trixie / Debian 13), install various dependencies with:
# Audio codecs
sudo apt install python3-pyaudio codec2
# For hardware control over I2C:
pip install smbus2 --break-system-packages # Install smbus module if not already installed
sudo raspi-config # Enable the I2C bus under "Interface Options"
sudo apt install python3-rpi.gpio # Install gpio module system-wide
Metadata
Release files for lxst 0.6.1
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Actions Reset |
|---|---|---|---|---|
| lxst-0.6.1-py3-none-any.whl | Python 3 | none | any | Details for lxst-0.6.1-py3-none-any.whl |
Release files / lxst-0.6.1-py3-none-any.whl
| Download URL | lxst-0.6.1-py3-none-any.whl |
|---|---|
| Size | 3.7 MB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
824abfb95a8ed38adf9eb81cf19f8b320ece8376992cc1528fb31e72c8798998
|
|
BLAKE2b-256 checksum How to use checksums |
8770c529861fbc98398195956c687994060c825eb5854c9e40d94492f47b54ad
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/6.2.0 CPython/3.14.6
|
Security for lxst 0.6.1
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
No provenance found
None of the files in this release were uploaded with provenance metadata.
A note on package security
PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.
To learn more about protecting yourself from malicious actors, visit our package security documentation.