meshpop-wire 1.0.1

Autonomous WireGuard mesh VPN with P2P, relay fallback, and MCP server

Wire — Self-Hosted WireGuard Mesh VPN

No Tailscale dependency — run your own mesh VPN with full control.

Overview

Wire is a self-hosted WireGuard mesh VPN that automatically connects all your servers into a single private network (10.99.x.x/16). It handles peer discovery, NAT traversal, relay failover, and interface management — all with zero manual WireGuard configuration.

Features

• Zero config: Point to coordinator server, get connected automatically
• Auto mesh: Nodes discover each other via coordinator API
• Relay failover: Multi-relay support with automatic fallback
• NAT traversal: UDP hole punching with relay fallback for NAT clients
• Cross-platform: Linux, macOS, Synology NAS (DSM 7)
• MCP support: AI-driven VPN management via MCP server
• Interface: wire0: Standardized interface name across all nodes

Quick Start

Coordinator + Relay Server (VPS with public IP)

python3 server.py 8786

Client Node

sudo python3 client.py --server http://YOUR_VPS:8786

Done. All clients automatically discover each other and form a mesh.

Architecture

┌─────────────────────────────────────────────────────────┐
│                   Wire Mesh Network                      │
│                   10.99.x.x/16                           │
├─────────────────────────────────────────────────────────┤
│                                                          │
│    ┌──────────────────────────────────────────┐         │
│    │          Relay Nodes (Public IP)          │         │
│    │  v1 (Primary)  v2 (Secondary)  v3 (Tertiary) │    │
│    │  AllowedIPs: per-peer /32 routing         │         │
│    └──────────┬───────────────────┬────────────┘         │
│               │                   │                      │
│    ┌──────────┴───────────────────┴────────────┐         │
│    │          Client Nodes (Behind NAT)         │         │
│    │  g1-g4 (GPU)   d1-d2 (Bare Metal)         │         │
│    │  m1 (macOS)    s1-s2 (Synology NAS)       │         │
│    │  AllowedIPs: 10.99.x.x/16 via relay       │         │
│    └───────────────────────────────────────────┘         │
│                                                          │
└─────────────────────────────────────────────────────────┘

Routing Model

• Relay nodes (v1, v2, v3): Have /32 routes to every peer; forward traffic between NAT clients
• Client nodes: Route all VPN traffic (10.99.x.x/16) via the primary relay (v1); direct /32 peers added for VPS nodes with known endpoints
• Hub node (v1): Primary relay and coordinator; all nodes set AllowedIPs: 10.99.x.x/16 for v1

Installation

One-liner (Linux)

curl -sSL http://YOUR_VPS:8786/install.sh | sudo bash

This installs WireGuard, downloads client.py, registers as a systemd service, and enables IP forwarding.

macOS

brew install wireguard-tools wireguard-go
sudo python3 client.py --server http://YOUR_VPS:8786

Synology NAS (DSM 7)

# Requires WireGuard package from SynoCommunity
# Config: /etc/wireguard/wire0.conf
# WireGuard binary: /volume1/@appstore/WireGuard/wireguard/wg-quick

# Boot script: /usr/local/etc/rc.d/wire0.sh
cat > /usr/local/etc/rc.d/wire0.sh << 'EOF'
#!/bin/bash
case "$1" in
  start) /volume1/@appstore/WireGuard/wireguard/wg-quick up wire0 ;;
  stop)  /volume1/@appstore/WireGuard/wireguard/wg-quick down wire0 ;;
esac
EOF
chmod +x /usr/local/etc/rc.d/wire0.sh

Configuration

wire0.conf (Example — Client Node)

[Interface]
PrivateKey = <generated-private-key>
ListenPort = 51820
Address = 10.99.x.x/16

[Peer]
PublicKey = <relay-public-key>
Endpoint = <relay-public-ip>:51838
AllowedIPs = 10.99.x.x/16
PersistentKeepalive = 25

Coordinator API

Endpoint	Method	Description
/register	POST	Register node (node_id, wg_public_key, port, lan_ip)
/peers	GET	List all registered peers
/punch	POST	Request NAT hole-punching (relay fallback on failure)
/health	GET	Coordinator health check

MCP Integration

Wire includes a dedicated MCP server (wire-mcp-server.py) for AI-assisted VPN management.

{
  "mcpServers": {
    "wire": {
      "command": "python3",
      "args": ["/path/to/wire-mcp-server.py"]
    }
  }
}

MCP Tools

Tool	Description
wire_status	Check VPN interface and peer status
wire_peers	List all connected peers with handshake info
wire_install	Generate installation commands for new nodes
wire_diagnose	Diagnose connectivity issues
wire_connect	Generate connect commands
wire_add_node	Add a new node to the mesh
wire_remove_node	Remove a node from the mesh
wire_watchdog	Monitor VPN health

Cluster Status (14 Nodes)

Server	Role	VPN IP	Platform	Interface
v1	Relay + Coordinator	10.99.x.x	Linux	wire0
v2	Relay	10.99.x.x	Linux	wire0
v3	Relay	10.99.x.x	Linux	wire0
n1	Client	10.99.x.x	Linux	wire0
g1	Client	10.99.x.x	Linux	wire0
g2	Client	10.99.x.x	Linux	wire0
g3	Client	10.99.x.x	Linux	wire0
g4	Client	10.99.x.x	Linux	wire0
d1	Client	10.99.x.x	Linux	wire0
d2	Client	10.99.x.x	Linux	wire0
m1	Client	10.99.x.x	macOS	wire0
s1	Client	10.99.x.x	DSM 7	wire0
s2	Client	10.99.x.x	DSM 7	wire0

Note: All nodes migrated from legacy awlite0 interface to wire0 as of 2026-03-14. The awlite0 interface and all related configurations have been fully removed from every server.

Troubleshooting

No handshake with peer

# Check interface status
wg show wire0

# Verify endpoint is reachable
ping <relay-public-ip>

# Manually set endpoint
wg set wire0 peer <pubkey> endpoint <ip>:<port>

Check if traffic routes through relay

ping 10.99.x.x
wg show wire0   # Check "endpoint" column — relay IP means relayed

Restart service

# Linux
systemctl restart wire

# Synology NAS
/usr/local/etc/rc.d/wire0.sh stop && /usr/local/etc/rc.d/wire0.sh start

Tailscale Fallback

If Wire VPN is unreachable, all nodes also have Tailscale installed as backup access:

# Example: access s1 via Tailscale
ssh user@100.x.x.x

Requirements

• Python 3.8+
• WireGuard: apt install wireguard (Linux), brew install wireguard-tools wireguard-go (macOS)
• IP forwarding enabled on relay nodes

File Locations

File	Path	Description
server.py	MeshPOP/wire/server.py	Coordinator + relay server
client.py	MeshPOP/wire/client.py	Auto-mesh client agent
wire-mcp-server.py	MeshPOP/wire/wire-mcp-server.py	MCP server for AI integration
wire0.conf	/etc/wireguard/wire0.conf	WireGuard interface config
install.sh	Served via coordinator	One-liner install script

Migration History

Date	Change
2026-03-14	awlite0 → wire0 migration on s1, s2 (Synology NAS); awlite0 remnants removed from all 14 servers
2026-02-26	Mesh routing fix — v1 hub model with /16 routing; NAT clients route via relay
2026-02-20	Initial Wire deployment replacing Tailscale dependency

License

MIT