Skip to main content

Nexus Data writer implemented as a Tango Server

Project description

Authors: Jan Kotanski, Eugen Wintersberger, Halil Pasic

Introduction

NXSDataWriter is a Tango server which allows to store NeXuS Data in H5 files.

The server provides storing data from other Tango devices, various databases as well as passed by a user client via JSON strings.

Tango Server API: https://nexdatas.github.io/nxsdatawriter/doc_html

Installation

Install the dependencies:

pninexus or h5py, tango, numpy, nxstools, sphinx

From sources

Download the latest NexDaTaS version from

Extract sources and run

$ python setup.py install

Debian packages

Debian bookworm, bullseye, buster or Ubuntu lunar, jammy, focal packages can be found in the HDRI repository.

To install the debian packages, add the PGP repository key

$ sudo su
$ curl -s http://repos.pni-hdri.de/debian_repo.pub.gpg | gpg --no-default-keyring --keyring gnupg-ring:/etc/apt/trusted.gpg.d/debian-hdri-repo.gpg --import
$ chmod 644 /etc/apt/trusted.gpg.d/debian-hdri-repo.gpg

and then download the corresponding source list

$ cd /etc/apt/sources.list.d
$ wget http://repos.pni-hdri.de/bookworm-pni-hdri.list

To install tango server

$ apt-get update
$ apt-get install nxswriter

or

$ apt-get update
$ apt-get install nxswriter3

for older python3 releases.

To install only the python3 package

$ apt-get update
$ apt-get install python3-nxswriter

and for python2

$ apt-get update
$ apt-get install python-nxswriter

if exists.

From pip

To install it from pip you can

$ python3 -m venv myvenv
$ . myvenv/bin/activate

$ pip install nxswriter

Moreover it is also good to install

$ pip install pytango
$ pip install pymysqldb
$ pip install psycopg2-binary
$ pip install cx-oracle

Setting NeXus Writer Server

To set up NeXus Writer Server run

$ nxsetup -x NXSDataWriter

The nxsetup command comes from the python-nxstools package.

Client code

In order to use Nexus Data Server one has to write a client code. Some simple client codes are in the nexdatas repository. In this section we add some comments related to the client code.

# To use the Tango Server we must import the tango module and
# create DeviceProxy for the server.

import tango

device = "p09/tdw/r228"
dpx = tango.DeviceProxy(device)
dpx.set_timeout_millis(10000)

dpx.Init()

# Here device corresponds to a name of our Nexus Data Server.
# The Init() method resets the state of the server.

dpx.FileName = "test.h5"
dpx.OpenFile()

# We set the name of the output HDF5 file and open it.

# Now we are ready to pass the XML settings describing a structure of
# the output file as well as defining a way of data storing.
# Examples of the XMLSettings can be found in the XMLExamples directory.

with open("test.xml", 'r') as fl:
    xml = fl.read()
dpx.XMLSettings = xml

dpx.JSONRecord = '{"data": {"parameterA":0.2},
                      "decoders":{"DESY2D":"desydecoders.desy2Ddec.desy2d"},
                      "datasources":{
                           "MCLIENT":"sources.DataSources.LocalClientSource"}
}'

dpx.OpenEntry()

# We read our XML settings settings from a file and pass them to the server via
# the XMLSettings attribute. Then we open an entry group related to the XML
# configuration. Optionally, we can also set JSONRecord, i.e. an attribute
# which contains a global JSON string with data needed to store during opening
# the entry and also other stages of recording. If external decoder for
# DevEncoded data is need one can registred it passing its packages and
# class names in JSONRecord,
# e.g. "desy2d" class of "DESY2D" label in "desydecoders.desy2Ddec" package.
# Similarly making use of "datasources" records of the JSON string one can
# registred additional datasources. The OpenEntry method stores data defined
# in the XML string with strategy=INIT.
# The JSONRecord attribute can be changed during recording our data.

# After finalization of the configuration process we can start recording
# the main experiment data in a STEP mode.

dpx.Record('{"data": {"p09/counter/exp.01":0.1, "p09/counter/exp.02":1.1}}')

# Every time we call the Record method all nexus fields defined with
# strategy=STEP are extended by one record unit and the assigned to them data
# is stored. As the method argument we pass a local JSON string with the client
# data. To record the client data one can also use the global JSONRecord string.
# Contrary to the global JSON string the local one is only
# valid during one record step.

dpx.Record('{"data": {"emittance_x": 0.1},  "triggers":["trigger1", "trigger2"]  }')

# If you denote in your XML configuration string some fields by additional
# trigger attributes you may ask the server to store your data only in specific
# record steps. This can be helpful if you want to store your data in
# asynchronous mode. To this end you define in the local JSON string a list of
# triggers which are used in the current record step.

dpx.JSONRecord = '{"data": {"parameterB":0.3}}'
dpx.CloseEntry()

# After scanning experiment data in 'STEP' mode we close the entry.
# To this end we call the CloseEntry method which also stores data defined
# with strategy=FINAL. Since our HDF5 file can contain many entries we can again
# open the entry and repeat our record procedure. If we define more than one entry
# in one XML setting string the defined entries are recorded parallel
# with the same steps.

# Finally, we can close our output file by

dpx.CloseFile()

Additionally, one can use asynchronous versions of OpenEntry, Record, CloseEntry, i.e. OpenEntryAsynch, RecordAsynch, CloseEntryAsynch. In this case data is stored in a background thread and during this writing Tango Data Server has a state RUNNING.

In order to build the XML configurations in the easy way the authors of the server provide for this purpose a specialized GUI tool, Component Designer. The attached to the server XML examples was created by XMLFile class defined in XMLCreator/simpleXML.py.

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

nxswriter-3.11.0.tar.gz (465.2 kB view details)

Uploaded Source

Built Distribution

nxswriter-3.11.0-py3-none-any.whl (82.0 kB view details)

Uploaded Python 3

File details

Details for the file nxswriter-3.11.0.tar.gz.

File metadata

  • Download URL: nxswriter-3.11.0.tar.gz
  • Upload date:
  • Size: 465.2 kB
  • Tags: Source
  • Uploaded using Trusted Publishing? No
  • Uploaded via: twine/4.0.2 CPython/3.11.2

File hashes

Hashes for nxswriter-3.11.0.tar.gz
Algorithm Hash digest
SHA256 599b03aaab0c7a73c2f53517271efd3bdaae6ac996354cc390d9b22323f6c0ad
MD5 5d35b0022d418aab02960171f3a2fb3e
BLAKE2b-256 ce5f8dbf4579e2701eb97cb1f28c896f61b5c00005b80fcff922d66cf2320238

See more details on using hashes here.

File details

Details for the file nxswriter-3.11.0-py3-none-any.whl.

File metadata

  • Download URL: nxswriter-3.11.0-py3-none-any.whl
  • Upload date:
  • Size: 82.0 kB
  • Tags: Python 3
  • Uploaded using Trusted Publishing? No
  • Uploaded via: twine/4.0.2 CPython/3.11.2

File hashes

Hashes for nxswriter-3.11.0-py3-none-any.whl
Algorithm Hash digest
SHA256 3f769299eaf9e0f822dc526fd3fcc1b094669bce8e4e0c9c4426778ebd320411
MD5 84f558d9bae007f9f132e26b84fbe560
BLAKE2b-256 6cf586fe19a287e002803b4bc78674d12d3581bd7b8e2f41ca879156b8fb0ab2

See more details on using hashes here.

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page