Skip to main content

phaethon-chimera

GenesisAeon Package DOI Whitepaper DESTINY+ Python 3.11+ License: MIT

GenesisAeon Package 35 — Phaethon-Asteroid: Frustrierte Systeme & Chimera-Zustände

UTAC-Modellierung von 3200 Phaethon als frustriertes Chimera-System. 47 quantitative Vorhersagen für die DESTINY+ JAXA-Mission (Flyby 2030).


Wissenschaftlicher Hintergrund

3200 Phaethon ist ein anomales Objekt — gleichzeitig Asteroid (deterministisch, Keplerbahn) und kometenähnlich (stochastischer Staubausstoß bei Perihel, Quelle der Geminiden).

Diese Frustration im UTAC-Kontext entsteht durch:

dH/dt = r·H·(1-H/K)·tanh(σΓ) + A·cos(ω_Phaethon·t)

Der periodische Term (Bahnfrequenz) konkurriert mit dem UTAC-Logistik-Term → Chimera-Zustand: Teil des Systems ist geordnet (Keplerbahn), Teil ist SOC (stochastische Aktivität bei Perihel).

CREP-Einordnung

System Γ Domäne
Amazon 0.116 Ökologie
Phaethon 0.165 Asteroidendynamik
AMOC 0.251 Ozeanographie
Neural 0.251 Neurowissenschaft

Phaethon liegt zwischen Amazon und AMOC — im mittleren kritischen Bereich.


Installation

pip install phaethon-chimera

Quickstart

uv sync
uv run pytest

# CLI
uv run phaethon run --n-orbits 10
uv run phaethon run --n-orbits 10 --destiny-predictions
uv run phaethon chimera-state
uv run phaethon destiny-report --format table

Kernklassen

Klasse Funktion
PhaethonChimera Diamond-Interface (run_cycle, CREP, UTAC, phase events)
FrustratedUTAC Frustrierte UTAC-ODE mit periodischem Forcing
ChimeraDetector Kuramoto-Ordnungsparameter R ∈ [0,1]
PhaethonOrbit Keplersche Bahn (JPL Horizons)
DustEmissionModel Stochastische Staubemission (Bernoulli + SOC)
SOCPhaethon Power-Law-Fit, Hurst-Exponent
GeminidModel Geminiden-Meteoritenstrom aus UTAC
DESTINY_PREDICTIONS Alle 47 falsifizierbaren Vorhersagen

47 DESTINY+ Vorhersagen (Auswahl)

# Größe Wert ± σ Einheit Falsifizierbar
1 Γ_phaethon 0.165 ± 0.02 — Nein — keine unabhängige Herleitung, siehe Hinweis unten
6 Chimera R (Perihel) 0.50 ± 0.10 — Ja
7 Chimera-Übergangsaltitude 2.3 ± 0.4 km Ja
11 Emissionswahrscheinlichkeit/Orbit 0.23 ± 0.08 — Ja
16 SOC τ-Exponent 1.3 ± 0.1 — Ja
36 Geminid ZHR 120 ± 20 /hr Ja
46 DESTINY+ Flyby 2030 ± 1 Jahr Ja

Die meisten Vorhersagen sind vor dem DESTINY+ Flyby (2030) publiziert → echt falsifizierbar. Ausnahme (2026-09-15, Ehrlichkeits-Review): Vorhersage #1 (Γ_phaethon) hat keine zitierte physikalische Herleitung — der Wert wurde laut ursprünglichem Code-Kommentar gewählt, um zwischen GAMMA_AMAZON (0,116) und GAMMA_AMOC (0,251) im geteilten Γ-Spektrum zu liegen, nicht aus einer gemessenen oder modellierten Eigenschaft von Phaethon abgeleitet. Vorhersage #4 (H*) wird direkt aus #1 und #3 berechnet und ist ebenfalls nicht unabhängig. Beide sind im Code jetzt als falsifiable=False markiert — siehe constants.pys GAMMA_PHAETHON-Docstring und crep-utac-afet-formalism/FOLLOWUP_TICKETS.md für die vollständige Herleitung.

Repository-Struktur

src/phaethon_chimera/
├── system.py              # PhaethonChimera — Diamond interface
├── orbital.py             # Keplersche Bahn (JPL Horizons)
├── frustrated_utac.py     # Frustrierte UTAC-ODE + RK4
├── chimera_detector.py    # Kuramoto-Ordnungsparameter
├── dust_emission.py       # Stochastische Staubemission + SOC
├── soc_phaethon.py        # Power-Law-Fit, Hurst-Exponent
├── destiny_predictions.py # 47 DESTINY+-Vorhersagen
├── geminid_model.py       # Geminiden-Meteoritenstrom
├── benchmark.py           # Benchmark-Targets
├── cli.py                 # phaethon CLI
└── constants.py           # Physikalische Konstanten

data/
├── phaethon_orbital_elements.yaml
├── destiny_plus_targets.yaml
└── ztf_photometry_summary.yaml

Benchmark-Targets

BENCHMARK_TARGETS = {
    "gamma_phaethon":        (0.165, 0.020),
    "chimera_R_perihelion":  (0.500, 0.100),
    "soc_tau_exponent":      (1.300, 0.100),
    "emission_probability":  (0.230, 0.080),
    "geminid_zhr":           (120.0, 30.0),
    "n_destiny_predictions": (47.0,  0.0),
    "phi_cuberoot":          (1.17480502, 0.00001),
}

GENESIS-OS Registrierung

PACKAGE_REGISTRY[35] = {
    "name": "phaethon-chimera",
    "class": PhaethonChimera,
    "domain": "asteroid-dynamics",
    "scale": "solar-system",
    "zenodo": "10.5281/zenodo.20807497",
    "reference": "DESTINY+ 2024+"
}

Citation

DOI

@software{roemer_phaethon_chimera_2026,
  author    = {Römer, Johann},
  title     = {phaethon-chimera: Frustrated UTAC Systems \& Chimera States},
  version   = {1.0.0},
  publisher = {Zenodo},
  doi       = {10.5281/zenodo.20807497},
  year      = {2026},
  note      = {GenesisAeon Package 35, DESTINY+ predictions}
}

A new Zenodo DOI version will be assigned automatically on each future GitHub Release, once Zenodo–GitHub integration is enabled for this repo.

Verbindung zum GenesisAeon-Ökosystem

  • P31 (vrig-cosmological): v_RIG ≈ 1352 km/s normiert auf Phaethon-Orbitalgeschwindigkeit
  • P32 (beta-clustering): β-Cluster — Phaethon im astrophysikalischen Cluster (β ≈ 0.65–1.20)
  • P36 (sa-sv-duality): S_A/S_V-Entropiedualität der Phaethon-Trajektorie
  • P38 (phi-scaling): Φ^(1/3) ≈ 1.174 Skalierung zwischen Orbitaldynamik-Domänen

Zeitkritisch: DESTINY+ Flyby 2030 — alle Vorhersagen sind vor dem Flyby publiziert.

Ehrlichkeits-Nachtrag (2026-09-15, DESTINY+-Vorhersagen-Audit): Bei einer stichprobenartigen Prüfung der auf reale externe Quellen gestützten Vorhersagen (Hanus et al. 2016, JAXA-Missionsplan, Geminiden- Literatur, sowie der paketinternen Physik-Funktionen) wurden drei echte, unabhängig verifizierte Fehler gefunden und korrigiert: #26 (Radius: falsche Quellenangabe UND falscher Wert — Hanus et al. 2016 lieferte 5,1±0,2 km Durchmesser aus Thermophysik-Modellierung, nicht 2,78 km Radius aus Okkultationsdaten), #40 (Auswurfgeschwindigkeit: die eigene ejection_velocity_ms()-Funktion des Pakets wurde nie tatsächlich aufgerufen, um den Wert zu erzeugen — mit den eigenen Parametern ergibt sie ≈2,49 m/s, nicht 1,2 m/s), #46 (Flyby-Jahr: durch den JAXA-eigenen Trägerraketenwechsel auf H3 auf JFY2030 verschoben, war noch auf dem älteren 2029-Planungsstand). #47 (Anzahl Perihel-Durchgänge) hat eine verbleibende, dokumentierte Rechen-Inkonsistenz, die NICHT zwangskorrigiert wurde — eine echte Neuberechnung braucht präzise Perihel-Epochendaten (z.B. von JPL Horizons), die hier nicht vorlagen. Details: destiny_predictions.py, FOLLOWUP_TICKETS.md.


Johann Römer · MOR Research Collective · Mai 2026

Metadata

Release files for phaethon-chimera 1.0.4

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for phaethon-chimera 1.0.4
File Size Uploaded Provenance
phaethon_chimera-1.0.4.tar.gz 200.9 kB With provenance Details

Built distribution (wheel)

Table of built distributions (wheels) for phaethon-chimera 1.0.4
File Interpreter ABI Platform
phaethon_chimera-1.0.4-py3-none-any.whl Python 3 none any Details

Total release size: 232.2 kB

Release files / phaethon_chimera-1.0.4.tar.gz

Download URL phaethon_chimera-1.0.4.tar.gz
Size 200.9 kB
Tags Source
SHA-256 checksum
How to use checksums
f980a88c9ea7d97396bc186d3526b1b9cf4664773f561afcbc9f7372113e1f63
BLAKE2b-256 checksum
How to use checksums
69e058cff2a40fdfdc45be904b340ed4a7d1ef07c2bb5f6f928609527ae4cc63
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.14

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Sep 15, 2026.

Transparency log

Release files / phaethon_chimera-1.0.4-py3-none-any.whl

Download URL phaethon_chimera-1.0.4-py3-none-any.whl
Size 31.2 kB
Tags Python 3
SHA-256 checksum
How to use checksums
f883ce103a51273257e6851a8d25a18ff2b02f44247e318714a552d7f519bc5d
BLAKE2b-256 checksum
How to use checksums
cb69cee5f97aaeaaeeb0e8fbb4faac41baa8b599fda2f62fa3b24cb20e04ad62
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.14

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Sep 15, 2026.

Transparency log

Security for phaethon-chimera 1.0.4

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

Full provenance

All 2 files in this release have been uploaded with provenance metadata.

Select from 2 files

Attestation for phaethon_chimera-1.0.4.tar.gz

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Sep 15, 2026.

Transparency log

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page