prosafe-exporter 0.4.1

Prometheus metrics exporter for NETGEAR switches of the Smart Managed Plus series.

prosafe_exporter_python

Prometheus metrics exporter for NETGEAR switches of the Smart Managed Plus series.

Exported Metrics

metric	description	labels
prosafe_switch_info	Information about the switch exposed as labels	hostname, product_name, switch_name, serial_number, mac_adresse, bootloader_version, firmware_version, dhcp_mode, ip_adresse, subnetmask, gateway_adresse
prosafe_receive_bytes_total	Incoming transfer in bytes	hostname, port
prosafe_transmit_bytes_total	Outgoing transfer in bytes	hostname, port
prosafe_error_packets_total	Transfer error in packets	hostname, port
prosafe_link_speed	Link speed in Mbps	hostname, port
prosafe_max_mtu*	Maximum MTU	hostname, port

* not available in all firmware versions

Usage

Setup a config.yml

global: 
  retrieve_interval: 20.0
  retries: 10
  host: "0.0.0.0"
  port: 9493
switches: 
  - hostname: "192.168.0.100"
    password: "password123"
  - hostname: "192.168.0.200"
    password: "password123"

Run with:

prosafe_exporter path/to/your/config.yml

In prometheus configure a scrape job, e.g. like this:

scrape_configs:
 - job_name: 'prosafe_switches'
    static_configs:
      - targets:
        - "prosafe_exporter:9493"
    metrics_path: /probe
    scrape_interval: 60s

Query Example

Outgoing data rate of port 1 on 192.168.0.123 is below.

rate(prosafe_transmit_bytes_total{instance="192.168.0.123", port="1"}[1m])

Tested Switches

• GS108Ev3
• GS108PEv3

Tested Firmware

• V2.06.14GR
• V2.06.14EN
• V2.06.03EN

Known Issues

• May not work with older firmware, not all firmware versions are tested
• Does not work with Japanese firmware

Credits

Inspired by dalance/prosafe_exporter that is providing the same functionality using the ProSAFE Plus utility instead of the switches webinterface