python-protocol-gateway 1.1.10

Python Protocol Gateway reads data via Modbus RTU or other protocols and translates the data for MQTT. In the long run, Python Protocol Gateway will become a general purpose protocol gateway to translate between more than just modbus and mqtt.

For advanced configuration help, please checkout the documentation :)

/documentation

Python Protocol Gateway

Python Protocol Gateway is a python-based service that reads data via Modbus RTU or other protocols and translates the data for MQTT. Configuration is handled via a small config files. In the long run, Python Protocol Gateway will become a general purpose protocol gateway to translate between more than just modbus and mqtt.

For specific device installation instructions please checkout the documentation: Growatt, EG4, Sigineer, SOK, PACE-BMS, Sigineer, ect...

/documentation/devices

General Installation

Connect the USB port on the inverter into your computer / device. This port is essentially modbus usb adapter. When connected, the device will show up as a serial port.

Alternatively, connect a usb adapter to your rs485 / can port with appropriate wiring.

install as homeassistant add-on

checkout: PPG HASS Addon

install requirements

apt install pip python3 -y
pip install -r requirements.txt

python 3.9 or greater. python 3.10+ for best compatability.

Config file (config.cfg) - copy .example.cfg to .cfg

Edit configuration.

cp config.example.cfg  config.cfg
nano config.cfg

inverters / protocols

manually select protocol in .cfg protocol_version = {{version}}

eg4_v58 = eg4 inverters
eg4_3000ehv_v1 = eg4 inverters
v0.14 = growatt inverters 2020+
sigineer_v0.11 = sigineer inverters
srne_v3.9 = SRNE inverters

hdhk_16ch_ac_module = some chinese current monitoring device :P

Untested Protocols

growatt_2020_v1.24 = alt protocol for large growatt inverters
victron_gx_3.3 = Victron GX Devices
solark_v1.1 = SolarArk 8/12K Inverters

For a complete list of protocols, explore: /Protocols

For a more complete list of tested devices & protocols: Tested Devices & Protocols

more advanced details can be found in the documentation: /Documentation

run as script

python3 -u protocol_gateway.py

or

python3 -u protocol_gateway.py config.cfg

install as service

ppg can be used as a shorter service name ;)

cp protocol_gateway.example.service  /etc/systemd/system/protocol_gateway.service
nano /etc/systemd/system/protocol_gateway.service

edit working directory in service file to wherever you put the files

nano /etc/systemd/system/protocol_gateway.service

reload daemon, enable and start service

sudo systemctl daemon-reload
sudo systemctl enable protocol_gateway.service
sudo systemctl start protocol_gateway.service
systemctl status protocol_gateway.service

install mqtt on home assistant

Settings -> Add-Ons -> Add-On Store -> Mosquitto broker

setup Mosquitto broker

Settings -> People -> Users -> Add User -> Can only log in from the local network -> Fill Details

once installed; the device should show up on home assistant under mqtt

Settings -> Devices & Services -> MQTT

more docs on setting up mqtt here: https://www.home-assistant.io/integrations/mqtt

connect mqtt on home assistant with external mqtt broker

HowTo Connect External MQTT Broker To HomeAssistant

general update procedure

update files and restart script / service

git pull
systemctl restart protocol_gateway.service

Unknown Status MQTT Home Assistant

If all values appear as "Unknown" This is a bug with home assistant's discovery that some times happens when adding for the first time. just restart the service / script and it will fix itself.

variable names

variable names have been modified for greater readability. if it's confusing you can change them via protocols/{version}_input_registry_map.csv you can also find the original documented variable names there; to use the original names, empty the variable name column the csvs are using ";" as the delimeter, because that is what open office uses.

variable_mask.txt

if you want to only send/get specific variables, put them in variable_mask.txt file. one variable per line. if list is empty all variables will be sent

variable1
variable2

variable_screen.txt

if you want to exclude specific variables, put them in the variable_screen.txt file. one variable per line.

variable_to_exclude
variable_to_exclude2

Any ModBus RTU Device

As i dive deeper into solar monitoring and general automation, i've come to the realization that ModBus RTU is the "standard" and basically... everything uses it. With how this is setup, it can be used with basically anything running ModBus RTU so long as you have the documentation.

So... don't mind me as i may add other devices such as battery bms' and... i have a home energy monitor on the way! so i'll be adding that when it arrives.

donate

this took me a while to make; and i had to make it because there werent any working solutions. donations / sponsoring this repo would be appreciated.

Use Docker

• docker build . -t protocol_gateway
• docker run --device=/dev/ttyUSB0 protocol_gateway

Use Docker Image

• docker pull hotn00b/pythonprotocolgateway
• docker run -v $(pwd)/config.cfg:/app/config.cfg --device=/dev/ttyUSB0 hotn00b/pythonprotocolgateway

See config.cfg.example

Docker Image Repo