rivalcfg 2.6.0

Configure SteelSeries Rival gaming mice

rivalcfg is a small CLI utility program that allows you to configure SteelSeries Rival gaming mice on Linux.

Supported mice:

• SteelSeries Rival (1038:1384)

• SteelSeries Rival 100 (1038:1702)

• SteelSeries Rival 300 (1038:1710)

• SteelSeries Rival 300 CS:GO Fade Edition (1038:1394)

• SteelSeries Rival 300 CS:GO Hyperbeast Edition (1038:171a)

If you have trouble running this software, please open an issue on Github:

• https://github.com/flozz/rivalcfg/issues

Requirement

• Any Linux distribution that use udev (Debian, Ubuntu, ArchLinux, Fedora,…)

• `pyudev <https://pypi.python.org/pypi/pyudev>`__

Installation

From PYPI

Run the following command (as root):

pip install rivalcfg

From sources

Clone the repositiory:

git clone https://github.com/flozz/rivalcfg.git
cd rivalcfg

Install rivalcfg (as root):

pip install .

NOTE: udev rules should be automatically installed, but if setup fails, you should copy the rules manually: cp rivalcfg/data/99-steelseries-rival.rules /etc/udev/rules.d/ and then run the udevadm trigger command.

From Arch Linux AUR package

Use package rivalcfg-git

CLI

Usage: rivalcfg [options]

Main Options:

--version           show program's version number and exit
-h, --help          show this help message and exit
-l, --list          print compatible mice and exit

SteelSeries Rival and Rival 300 Options:

-c LOGO_COLOR, --logo-color=LOGO_COLOR
                    Set the logo backlight color (e.g. red, #ff0000,
                    ff0000, #f00, f00, default: #FF1800)
-e LOGO_LIGHT_EFFECT, --logo-light-effect=LOGO_LIGHT_EFFECT
                    Set the logo light effect (values: 1, 2, 3, 4, breath,
                    steady, default: steady)
-p POLLING_RATE, --polling-rate=POLLING_RATE
                    Set polling rate in Hz (values: 125, 250, 500, 1000,
                    default: 1000)
-s SENSITIVITY1, --sensitivity1=SENSITIVITY1
                    Set sensitivity preset 1 (from 50 to 6500 in
                    increments of 50, default: 800)
-S SENSITIVITY2, --sensitivity2=SENSITIVITY2
                    Set sensitivity preset 2 (from 50 to 6500 in
                    increments of 50, default: 1600)
-C WHEEL_COLOR, --wheel-color=WHEEL_COLOR
                    Set the wheel backlight color (e.g. red, #ff0000,
                    ff0000, #f00, f00, default: #FF1800)
-E WHEEL_LIGHT_EFFECT, --wheel-light-effect=WHEEL_LIGHT_EFFECT
                    Set the wheel light effect (values: 1, 2, 3, 4,
                    breath, steady, default: steady)
-r, --reset         Reset all options to their factory values

SteelSeries Rival 100 Options:

-b BTN6_ACTION, --btn6-action=BTN6_ACTION
                    Set the action of the button under the wheel (values:
                    default, os, default: default)
-c COLOR, --color=COLOR
                    Set the mouse backlight color (e.g. red, #ff0000,
                    ff0000, #f00, f00, default: #00FFFF)
-e LIGHT_EFFECT, --light-effect=LIGHT_EFFECT
                    Set the light effect (values: 1, 2, 3, 4, breath,
                    steady, default: steady)
-p POLLING_RATE, --polling-rate=POLLING_RATE
                    Set polling rate in Hz (values: 125, 250, 500, 1000,
                    default: 1000)
-s SENSITIVITY1, --sensitivity1=SENSITIVITY1
                    Set sensitivity preset 1 (values: 250, 500, 1000,
                    1250, 1500, 1750, 2000, 4000, default: 1000)
-S SENSITIVITY2, --sensitivity2=SENSITIVITY2
                    Set sensitivity preset 2 (values: 250, 500, 1000,
                    1250, 1500, 1750, 2000, 4000, default: 2000)
-r, --reset         Reset all options to their factory values

SteelSeries Rival 300 CS:GO Fade Edition Options:

-b BTN6_ACTION, --btn6-action=BTN6_ACTION
                    Set the action of the button under the wheel (values:
                    default, os, default: default)
-c LOGO_COLOR, --logo-color=LOGO_COLOR
                    Set the logo backlight color (e.g. red, #ff0000,
                    ff0000, #f00, f00, default: #FF5200)
-e LOGO_LIGHT_EFFECT, --logo-light-effect=LOGO_LIGHT_EFFECT
                    Set the logo light effect (values: breathfast,
                    breathmed, breathslow, steady, 1, 2, 3, 4, default:
                    steady)
-p POLLING_RATE, --polling-rate=POLLING_RATE
                    Set polling rate in Hz (values: 125, 250, 500, 1000,
                    default: 1000)
-s SENSITIVITY1, --sensitivity1=SENSITIVITY1
                    Set sensitivity preset 1 (from 50 to 6500 in
                    increments of 50, default: 800)
-S SENSITIVITY2, --sensitivity2=SENSITIVITY2
                    Set sensitivity preset 2 (from 50 to 6500 in
                    increments of 50, default: 1600)
-C WHEEL_COLOR, --wheel-color=WHEEL_COLOR
                    Set the wheel backlight color (e.g. red, #ff0000,
                    ff0000, #f00, f00, default: #FF5200)
-E WHEEL_LIGHT_EFFECT, --wheel-light-effect=WHEEL_LIGHT_EFFECT
                    Set the wheel light effect (values: breathfast,
                    breathmed, breathslow, steady, 1, 2, 3, 4, default:
                    steady)
-r, --reset         Reset all options to their factory values

FAQ (Frequently Asked Questions)

How can I turn the lights off?

You can turn the lights off by setting the black color to the lights.

Example with Rival 100:

rivalcfg --color=black

Example with Rival, Rival 300:

rivalcfg --logo-color=black --wheel-color=black

I have a “Permission denied” error, what can I do?

If you have an error like

IOError: [Errno 13] Permission denied: u'/dev/hidrawXX'

this means that the udev rules have not been installed with the software. This can be fixed using the following commands (as root):

wget https://raw.githubusercontent.com/flozz/rivalcfg/master/rivalcfg/data/99-steelseries-rival.rules -O /etc/udev/rules.d/99-steelseries-rival.rules

sudo udevadm trigger

Debug

• DEBUG_DRY=true: Dry run (simulate commands, do not write anything to the device).

• DEBUG_PROFILE=<VendorID>:<ProductId>: Force to load the corresponding profile.

• DEBUG_DEVICE=<VendorID>:<ProductId> Force to use the specified USB device instead of the one that matches the profile

Example:

DEBUG_DRY=true DEBUG_PROFILE=1038:1384 rivalcfg -c ff3300

Result:

[DEBUG] Debugging rivalcfg 2.0.0...
[DEBUG] Dry run enabled
[DEBUG] Debugging mouse profile 1038:1384
[DEBUG] Mouse profile found: SteelSeries Rival
[DEBUG] _device_write: 08 01 FF 33 00
[DEBUG] _device_write: 09 00

Changelog

• 2.6.0: Add CS:GO Hyperbeast Edition support (thanks @chriscoyfish, #33)

• 2.5.3: Minor typo fixes for cli (thanks @chriscoyfish, #31)

• 2.5.2: Fixes Rival 300 with updated firmware not working (#5, #25, #28, special thanks to @Thiblizz)

• 2.5.1: Fixes mouse not recognized on system with more than 10 USB busses (#21)

• 2.5.0: Rival 300 CS:GO Fade Edition support (thanks @Percinnamon, #20)

• 2.4.4: Improves debug options

• 2.4.3: Fixes an issue with Python 3 (#8)

• 2.4.2: Fixes a TypeError with Python 3 (#7)

• 2.4.1: Help improved

• 2.4.0: Python 3 support (#4)

• 2.3.0:

• Rival and Rival 300 support is no more experimental

• Improves the device listing (–list)

• Fixes bug with color parsing in CLI (#1)

• Fixes unrecognized devices path on old kernel (#2)

• 2.2.0: Experimental Rival 300 support

• 2.1.1: Includes udev rules in the package and automatically install the rules (if possible)

• 2.1.0: Experimental Original Rival support

• 2.0.0: Refactored to support multiple mice

• 1.0.1: Fixes the pypi package

• 1.0.0: Initial release