rp2040py

Raspberry Pi Pico (RP2040) Emulator in Python — started as a port of rp2040js, now grown into its own CLI/SDK toolkit around it (see Differences from upstream rp2040js below). It blinks, runs native code, and even the MicroPython REPL!

See docs/reference/porting-checklist.md for the file-by-file port status against upstream rp2040js.

[!IMPORTANT] Single-core only. rp2040py emulates core0; there is no core1, and SIO's inter-core FIFO registers (FIFO_ST/FIFO_WR/FIFO_RD) are unimplemented — reads log a warning and return all-ones, writes are dropped, and CPUID always reads 0. Firmware that starts the second core (multicore_launch_core1(), MicroPython's _thread) will not work. This is deliberate rather than pending: adding the FIFO registers without a second core to answer them would turn today's loud failure into a silent infinite hang inside multicore_fifo_pop_blocking(), which is strictly worse — see docs/records/0053 for what building it properly involves. Single-core firmware — the default for MicroPython, CircuitPython, Kaluma and the pico-examples — is unaffected.

Quick start

pip install rp2040py
rp2040py micropython          # boots real MicroPython firmware, drops you into its REPL (Ctrl+X to quit)
rp2040py micropython -c "print(1 + 1)"   # or run one command non-interactively and exit

That's it — no manual firmware download, no board wiring. Everything below is depth: more firmware families (CircuitPython, Kaluma), WiFi, filesystems, a programmatic API, and how to add your own boards/devices. See Run the demo project for the full CLI, or jump straight to External devices & custom boards if you're here to extend it.

Table of Contents

• Quick start
• Installation
  • Shell completions
• Run the demo project
  • Native code
  • MicroPython code
    • mpremote
  • CircuitPython code
  • Kaluma
  • Filesystem support
  • WiFi (Pico W / CYW43439)
  • Bootrom revisions
• Library API
  • External devices & custom boards
    • Adding your own
    • Ready-made example boards
• Performance
• Differences from upstream rp2040js
• Used by
• Learn more
• License

Installation

pip install rp2040py

or, with uv:

uv add rp2040py       # into a project
uv tool install rp2040py   # as a standalone CLI tool
uvx rp2040py ...           # run without installing at all

Any of these gives you the rp2040py console script (python -m rp2040py works identically), so the emulator is runnable without a git checkout - see Run the demo project below for the checkout-equivalent commands.

[!NOTE] A handful of fully-sandboxed environments (iOS app runtimes - Pythonista, PythonIDE) can't load rp2040py's compiled extension; plain pip install rp2040py resolves to a wheel that won't load there. Force the pure-Python one instead: pip download rp2040py --only-binary=:all: --platform any --abi none && pip install rp2040py-*.whl --upgrade (the same artifact the release pipeline itself publishes, not a degraded build). Full platform × feature matrix - including Android, which works fine with the compiled extension - in docs/reference/os-compatibility.md.

Shell completions

rp2040py install-completion sets up tab completion for every subcommand and flag (--board, --log-level, --littlefs, ...) in Bash or Zsh, via argcomplete:

rp2040py install-completion
# then open a new shell, or:
source ~/.bashrc   # or ~/.zshrc

This appends the shell's register-python-argcomplete hook to ~/.bashrc/~/.zshrc (detected from $SHELL) - a one-time setup step, not something run on every invocation.

Run the demo project

The commands below assume rp2040py is installed (pip install rp2040py / uv add rp2040py / uv tool install rp2040py, or run ad hoc with uvx rp2040py ...). From a checkout of this repo instead, each maps 1:1 onto uv run python demo/*.py (demo/*.py are thin wrappers around the same src/rp2040py/cli code):

Two demos have no CLI equivalent because they emulate hardware rather than run firmware: the Waveshare 2.9″ e-Paper panel (demo/eink_run.py) and the RP2040-LCD-0.96's onboard ST7735S (demo/lcd_run.py). demo/README.md shows what both actually draw.

--board {pico,pico_w} (default pico) is available on all four and picks which board's fixed extras get attached alongside the RP2040 itself - the onboard LED and the BOOTSEL button on both, plus an emulated CYW43439 WiFi/Bluetooth chip on pico_w; see WiFi (Pico W / CYW43439) below.

Native code

You'd need to get hello_uart.hex by building it from the pico-examples repo, then copy it to the rp2040py root directory and run:

rp2040py run
# or, without installing:
uvx rp2040py run

You can also specify the path to the image on the command line and/or load a UF2 image:

rp2040py run --image ./my-pico-project.uf2

A GDB server will be available on port 3333, and the data written to UART0 will be printed to the console.

MicroPython code

No manual download needed: just run

rp2040py micropython
# or, without installing:
uvx rp2040py micropython

and enjoy the MicroPython REPL! Quit the REPL with Ctrl+X. The first run fetches the recommended MicroPython build (1.21.0, currently) from micropython.org into ~/.cache/rp2040py and reuses that cached file afterwards (falls back to the current directory if the cache directory isn't writable). 1.21 is recommended: it does far less work before dropping to the REPL prompt than newer releases, so it boots dramatically faster in the emulator (see the benchmark below). Newer releases work too, just slower to reach the REPL - e.g. 1.28.0.

A different version, a local UF2 file, or a CircuitPython version (--circuitpython, see below) can be loaded by supplying the --image option - a known version tag (1.28.0), or a path to a UF2 file already on disk:

[!TIP] Booting real firmware means executing millions of Thumb instructions through a pure-Python interpreter - dramatically slower than V8 JIT-compiling the equivalent JS in rp2040js, though the compiled rp2040py.native backend (on by default, see Performance below) closes most of that gap:

Interpreter	Time to a resident script's first output (MicroPython 1.28 boot)
CPython 3.10	133.3s
CPython 3.10 + rp2040py.native (on by default)	11.3s (~11.8x)
PyPy 3.10	8.9s (~15x)

This is also why 1.21 is the recommended default version: both 1.21 and 1.28 reach the bare REPL prompt in well under a second, but running a typical resident script afterward is ~45x more expensive under 1.28 than 1.21 - real work MicroPython 1.28's own firmware does per loop iteration, not an emulator bug. See docs/records/0013-cython-core.md for the full measured breakdown (methodology, PyPy/CPython-JIT comparisons, the 1.21-vs-1.28 instruction-count numbers) and docs/reference/porting-checklist.md for a synthetic instructions/sec benchmark across all three runtimes.

rp2040py micropython --image 1.28.0
rp2040py micropython --image my_image.uf2

A GDB server on port 3333 can be enabled by specifying the --gdb flag:

rp2040py micropython --gdb

For using the MicroPython demo code in tests, --expect-text can come in handy: it will look for the given text in the serial output and exit with code 0 if found, or 1 if not found. It's repeatable (--expect-text foo --expect-text bar stops once both have appeared, on any line, not necessarily the same one or in that order) and, with --expect-regex, each --expect-text value is matched as a Python re pattern (via re.search) instead of a plain substring. You can find an example in the MicroPython CI test.

For one-shot, non-interactive runs (like micropython's own CLI), pass one of -c <command>, -m <module>, or a script <filename> - mutually exclusive, matching [-c <command> | -m <module> | <filename>]. Instead of dropping into the REPL, rp2040py boots the device, runs it via the raw-REPL protocol, prints its stdout/stderr, and exits with the device's exit status (0 on success, 1 if it raised):

rp2040py micropython -c "print(1 + 1)"
rp2040py micropython -m sys
rp2040py micropython path/to/script.py

mpremote

--tcp-port <port> serves the console over a plain TCP socket instead of this process's own stdio, so mpremote can connect directly via pySerial's built-in socket:// support - no client-side patching needed:

rp2040py micropython --tcp-port 4321
# in another terminal:
mpremote connect socket://127.0.0.1:4321 exec "print(1 + 1)"
mpremote connect socket://127.0.0.1:4321 fs cp your_script.py :main.py

--pty (POSIX only) is the alternative - a real pseudo-terminal, which additionally supports mpremote's own bare interactive REPL (rp2040py mpremote, a thin proxy subcommand, gets that working over --tcp-port too, patching around an upstream mpremote bug).

See docs/reference/mpremote.md for the full picture: connection details for both flags, the proxy and the bug it patches around, how to quit the emulator when mpremote owns the console, and exactly which mpremote commands are verified working where.

Filesystem support and WiFi both work here too, and cover MicroPython/CircuitPython/Kaluma in one place below - see Filesystem support and WiFi (Pico W / CYW43439).

CircuitPython code

To run the CircuitPython demo, follow the directions above for MicroPython but add --circuitpython:

rp2040py micropython --circuitpython

and start the CircuitPython REPL! As with MicroPython, the firmware (8.0.2 by default) is downloaded automatically on first use; a different version or a local file can be given via --image (e.g. --image 10.2.1 or a path to an already-downloaded UF2). The rest of the experience is the same as the MicroPython demo (Ctrl+X to exit, the --gdb option, etc). Filesystem support (a FAT12 image, not littlefs) and WiFi both work here too - see Filesystem support and WiFi (Pico W / CYW43439) below, which cover all three firmware families in one place.

Kaluma

rp2040py's USB/CDC emulation isn't MicroPython-specific - any firmware presenting a CDC-ACM serial console works the same way underneath. The kaluma subcommand runs Kaluma (a JavaScript runtime for RP2040), verified against 1.2.1 - it boots, USB enumerates, and evaluates real JS at its REPL prompt (e.g. sending 1+1 gets back 2):

rp2040py kaluma
# or, without installing:
uvx rp2040py kaluma
rp2040py kaluma --image 1.2.1
rp2040py kaluma --image my_kaluma_image.uf2

As with micropython, missing firmware is downloaded automatically (1.2.1 by default - the newest release still shipping a plain, non--w, RP2040 pico build; 1.3.0+ only ships pico2/pico2-w). Ctrl+X to exit, same as the MicroPython demo. Unlike micropython, kaluma is interactive-only - Kaluma has no raw-REPL-equivalent protocol, so there's no -c/-m/<filename>.

An optional <script.js> positional stages a local file into Kaluma's "user program" flash region before boot - the same one kaluma flash <file> writes to on real hardware, which Kaluma auto-executes on every boot:

rp2040py kaluma your_script.js

--board pico_w works here too - Kaluma's own require('wifi') scans, joins, gets a DHCP lease, and opens real net.Socket connections to the internet through the same bridge described under WiFi (Pico W / CYW43439) below (tests/kaluma/main-cyw43.js is a runnable example), and filesystem support is covered under Filesystem support below too, alongside MicroPython/CircuitPython's.

Give it a few real seconds after connecting before expecting output - like MicroPython, booting real firmware through an interpreted emulator takes actual wall-clock time (JerryScript engine init, then running your script), not something --expect-text needs to work around, just something to expect if driving this non-interactively.

--tcp-port <port>/--pty also work here, same as micropython - see mpremote above (that section is mpremote-specific, but the underlying mechanism, a plain socket/pty serving the console instead of this process's own stdio, is not).

Kaluma prints its "Welcome to Kaluma" banner exactly once, right at boot - but that's before the emulated USB-CDC connection to the host is actually up, so (same as real hardware racing a host terminal that isn't already attached - Kaluma's own docs: "if you cannot see the prompt, press Enter several times") those bytes are typically gone by the time anything's listening. kaluma doesn't send anything to work around this - type .hi yourself at the prompt to reprint the same banner on demand if you need to see it; if you're scripting against a device's output instead of typing at it interactively, stage a <script.js> and match against its output, which isn't racy (see the Kaluma CI test, which does exactly that).

Filesystem support

mklittlefs builds a writeable LittleFS-formatted image on the host (needs the optional fs extra: pip install rp2040py[fs] / uv sync --extra fs) - shared by MicroPython and Kaluma, which both boot from real littlefs flash:

rp2040py mklittlefs -o littlefs.img your_main.py your.py files.py here.py --main your_main.py

Every file keeps its own basename; --main marks one as auto-run on boot (omit it for a filesystem with no auto-run script, or omit files entirely for an empty formatted image). Always builds fresh - pass -f/--force to overwrite an existing --output. --target {micropython,circuitpython,kaluma} presets --block-size/--block-count to a known firmware's own layout instead of spelling them out by hand (mutually exclusive with passing them explicitly - the three differ, see the per-firmware notes below). --disk-version {2.0,2.1} selects the littlefs on-disk format (defaults to 2.0: MicroPython <=1.21's bundled littlefs can only mount 2.0, 1.28's reads both - see docs/records/0003).

• MicroPython: --littlefs path/to/littlefs.img mounts it and auto-runs main.py if present (silently skipped, not an error, if it isn't - but never loaded at all unless --littlefs is given explicitly). The filesystem is writeable at runtime - os/rp2.Flash calls go through a real JEDEC SPI-NOR command emulation in the SSI peripheral (RPSSI), the same one real flash hardware uses.

• Kaluma: its own pluggable littlefs-backed filesystem (see its docs) lives in a different, fixed 512K flash region (4096-byte blocks) than the <script.js> user-program staging area above, with no auto-run semantics of its own - plain storage, accessed from JS via require('fs'). Pass it via --littlefs explicitly (never picked up implicitly, even from a kaluma_littlefs.img in the current directory):

  rp2040py mklittlefs -o kaluma_littlefs.img --target kaluma your_script.js
  rp2040py kaluma --littlefs kaluma_littlefs.img
  

  Without a valid image, board.js's unconditional mount-at-startup logs cosmetic Bad block/ Superblock ... unwritable/No space left on device errors against unformatted flash - Kaluma catches and prints them without aborting, so boot and <script.js> auto-run continue normally.

• CircuitPython: a FAT12 image instead of littlefs - build one with truncate/mkfs.vfat (not mklittlefs) and pass it via --fat12 (no default, never picked up implicitly):

  truncate fat12.img -s 1M && mkfs.vfat -F12 -S512 fat12.img
  mkdir fat12 && sudo mount -o loop fat12.img fat12/ && sudo cp code.py fat12/ && sudo umount fat12/
  rp2040py micropython --circuitpython --fat12 fat12.img
  

  CircuitPython doesn't typically write to its own filesystem at runtime the way MicroPython does, so this path hasn't been separately exercised - the underlying flash-write mechanism is the same SSI peripheral either way.

--dump-fs <path> dumps a device's littlefs flash region back out to a local file on exit (Ctrl+X, --expect-text, or the end of a run) - the same layout --littlefs reads back in, so it round-trips for persistence across runs. Works for both MicroPython and Kaluma; MicroPython additionally supports scripting it non-interactively via -c/-m/<filename> (see demo/mklittlefs_dump.py, which builds such a script from local files) - Kaluma has no non-interactive exec mode, so use require('fs') at its REPL instead. This makes --dump-fs a littlefs-python-free alternative to mklittlefs on either firmware: boot against blank flash, write files the normal way, dump the result - built by that firmware's own bundled littlefs, not a separately-installed library.

WiFi (Pico W / CYW43439)

--board pico_w (default: pico, any firmware) attaches an emulated CYW43439 - the WiFi/Bluetooth chip on a real Pico W - over the same gSPI bus real firmware drives it through. network.WLAN (MicroPython), wifi/socketpool (CircuitPython), and require('wifi')/net (Kaluma) all work against it - three independent network stacks over one bus, none of them needing anything CYW43-specific from the emulator:

rp2040py micropython --board pico_w

nic.active(True), nic.scan(), and nic.connect(ssid, key) all complete, answered by a fixed fake "RP2040PY-GUEST" access point built into the emulation. The association is fake, but the network behind it is real - a NAT bridge gives the guest a DHCP lease, answers its ARP, and splices its TCP connections and UDP datagrams onto real sockets on your machine, so code running on the emulated Pico W reaches the actual internet. Live-boot verified against real, unmodified MicroPython firmware on both 1.23.0 and 1.28.0:

import network, socket, mip, ntptime

nic = network.WLAN(network.WLAN.IF_STA)
nic.active(True)
print(nic.scan())  # [(b'RP2040PY-GUEST', ...)]
nic.connect("RP2040PY-GUEST", "key")  # any password is accepted
print(nic.isconnected(), nic.ipconfig("addr4"))  # True ('10.0.0.2', '255.255.255.0')

s = socket.socket()  # real TCP, out through your host's network
s.connect(("1.1.1.1", 80))
s.send(b"GET / HTTP/1.0\r\n\r\n")
print(s.recv(64))  # b'HTTP/1.1 301 Moved Permanently\r\n...'

mip.install("os-path")  # real DNS + a real HTTPS download
ntptime.settime()  # real NTP, sets the emulated RTC
nic.disconnect()  # link really goes down: isconnected() -> False, status() -> 0

TLS works through the same path (the reflector relays bytes without inspecting them), and so do WebSockets over both ws:// and wss://. CircuitPython (tests/circuitpython/main-cyw43.py) and Kaluma (tests/kaluma/main-cyw43.js) have their own runnable examples; CircuitPython additionally enforces WPA2's 8-64 character passphrase rule client-side, so the password you pass must be at least 8 characters even though the emulated AP accepts anything.

What is not emulated, so you don't discover it the hard way:

• The AP is a fixture. scan() always returns the one fake "RP2040PY-GUEST" network, any password "succeeds," and there's no hidden-SSID or auth-failure path to test against.
• No AP mode (network.WLAN.IF_AP), no IPv6, and one guest only (the guest/gateway IP and MAC are fixed constants, with no config surface yet).
• No flow-control backpressure from the real destination onto the guest: the emulator always advertises a fixed TCP receive window, so a guest that outran a slow destination would grow the host process's socket buffer rather than being told to slow down. An emulated Cortex-M0 can't realistically outrun a real socket, which is why this hasn't mattered in practice.

See docs/records/0027-cyw43-wifi.md for what's emulated at the gSPI/SDPCM protocol level and docs/records/0048-cyw43-nat-reflector.md for the network bridge (how the reflector works, and the full list of what's still open).

Bootrom revisions

run, micropython, kaluma, and bench all boot a fixed bootrom (B1, bundled - no download needed) by default. --bootrom picks a different one: a b0/b1/b2 version tag (downloaded automatically from Raspberry Pi's pico-bootrom-rp2040 releases and cached locally, same as --image), or a local .elf/.bin path:

rp2040py micropython --bootrom b2
rp2040py micropython --bootrom path/to/custom.elf

Raspberry Pi only publishes .elf for each revision - pyelftools (a normal dependency, not an extra: it's a pure-Python wheel with no platform-specific build to justify gating it) parses out the ROM image on the fly, no separate conversion step needed. A local .bin (e.g. produced with objcopy -O binary) is loaded directly with no parsing at all.

Library API

Everything above is the CLI, but the emulator is also usable programmatically - e.g. to run code against a device and check its output the way Thonny does over a real serial port, from a test suite or another tool. rp2040py.device.MicroPythonDevice boots a UF2 image (optionally for a specific board, e.g. board="pico_w") and lets you run code on it via the same raw-REPL protocol mpremote run/tools/pyboard.py use, interrupting anything already running on the device first (e.g. an auto-run main.py from a littlefs image).

[!NOTE] Async-native only, no blocking API. MicroPythonDevice/KalumaDevice/BaseDevice boot and run as coroutines on an asyncio event loop (the same "engine room" the CLI itself runs on) - there is no blocking start()/exec()/exec_file() and no synchronous with device: form. Calling a blocking wrapper's Future.result() from the same loop it would need to run on deadlocks (the loop can't process the coroutine that resolves the Future while its own thread is stuck waiting on it), so this project stopped offering one rather than ship that footgun - wrap a call in asyncio.run(...) yourself if you want blocking behavior from a plain script.

asyncio, via astart()/aexec()/aexec_file(), entered as an async with context manager:

import asyncio
from rp2040py.device import MicroPythonDevice


async def main():
    async with MicroPythonDevice("RPI_PICO-20231005-v1.21.0.uf2") as device:
        stdout, stderr = await device.aexec("print(1 + 1)")
        assert stdout == b"2\r\n"

        stdout, stderr = await device.aexec_file("my_script.py")


asyncio.run(main())

Callback style, via exec_async()'s concurrent.futures.Future - no separate API needed, Future.add_done_callback() does this out of the box. Requires the device already started (astart()/start_async() first, or already inside async with):

def on_done(future):
    stdout, stderr = future.result()
    print(stdout.decode())


device.exec_async("print(1 + 1)").add_done_callback(on_done)

Both share one asyncio.Lock per device: since the device only has a single REPL channel and can't run two exec()s at once, calling exec_async()/aexec() again before a previous call finishes doesn't raise, it just queues behind it and runs once its turn comes. This is exactly what powers the CLI's own micropython -c/-m/<filename> batch mode - it's a caller of this same API, not a separate implementation. start_async()/astart()/stop() are available directly if you want more control over the lifecycle than the context manager gives you - stop() itself stays a plain synchronous call.

External devices & custom boards

Beyond the built-in --board {pico,pico_w} presets, the emulator has a real extension point for hardware it doesn't model out of the box:

• ExternalDevice (rp2040py.external.device) - a device implements attach(rp2040) and gets wired up via attach_external_devices(). Devices already shipping in-tree this way: the onboard LED, the BOOTSEL button, a generic button/key, the CYW43439 WiFi chip behind pico_w, a Waveshare 2.9″ e-Paper panel, an ST7735S TFT controller, and a WS2812/WS2812B "NeoPixel" RGB LED.
• boards.BoardSpec (what --board itself resolves to internally) - a public dataclass you build your own instance of: your own device mix on an existing firmware family, or a fully custom board with its own firmware and flash layout. Hand it to any Device class (board=...) or the CLI (--board-spec target:attr / RP2040PY_BOARD_SPEC, on run/micropython/kaluma/ mklittlefs). A board declares its firmware as data - a firmware dict keyed by family (micropython/circuitpython/kaluma), each entry a tag→URL-or-local-path map plus that family's flash layout - so one file covers one board for every firmware that runs on it, downloads nothing when imported, and works with --image/--fetch-fw-only exactly as --board does.

Adding your own

docs/reference/external-devices-and-boards.md is the full how-to: worked examples for both a new device and a new board, the attach-timing rule, and the caveats worth knowing before you start. If you're working in Claude Code, the external-devices-and-boards skill turns that into a step-by-step execution checklist (which template to copy, which test proves what, and the "3g rule" - every electrical fact cited to a real upstream source, never guessed).

Ready-made example boards

19 worked --board-spec targets for real third-party hardware live in boards/ - every number sourced from that board's own upstream firmware config (never guessed), live-boot-verified against real firmware. See docs/reference/external-devices-and-boards.md for the full list with what each one demonstrates. Screenshots of what the two emulated display panels actually draw are in demo/README.md; see docs/records/0049/ 0059 for the design history behind the extension points themselves.

Performance

The interpreter core (CortexM0Core) and the memory bus's hot read/write paths are also available as a compiled Cython extension (rp2040py.native), giving roughly 7x the instruction throughput of the pure-Python implementation on both a synthetic benchmark and a real MicroPython boot (see docs/records/0013-cython-core.md for the full measured breakdown).

That extension has since grown past the core itself: the PIO block and its state machines (0031, 0047), the per-batch execution loop (0034), the simulation clock (0039) and GPIO pins (0047) are all native too. Those are wins on top of the 7x above, on the paths each one covers rather than across the board - the most recent, measured end to end, is ~2.6x on a Pico W CYW43 boot through to scan() (0047), a PIO/GPIO-heavy workload the original core port barely touched.

This is on by default and needs nothing from you: pip install rp2040py builds it automatically when a C compiler is available (prebuilt wheels are published for common platforms, so most installs don't even need one) and falls back to the identical pure-Python implementation otherwise

• correctness is the same either way, just the speed differs. A couple of environment variables exist for cases where you want to control this explicitly:

• RP2040PY_SKIP_CYTHON=1 - force the pure-Python implementation at runtime, even if the compiled extension is installed (e.g. to rule out a native-specific issue).

• RP2040PY_SKIP_NATIVE_BUILD=1 - skip compiling the extension at build time, for a deliberately pure-Python install/wheel.

Differences from upstream rp2040js

rp2040py started as a straight port of rp2040js - the core CPU/peripheral emulation still tracks it closely, and docs/reference/porting-checklist.md keeps a file-by-file checklist of that. But it's grown well past a 1:1 translation into its own toolkit with no rp2040js equivalent, built around actually running real firmware from a shell rather than embedding the emulator as a library (rp2040js's own primary use case, e.g. inside Wokwi):

• A real packaged CLI - rp2040py/python -m rp2040py, installable via pip/uv, not just a checkout-only demo/*.ts script. Firmware (MicroPython/CircuitPython/Kaluma) is auto-downloaded and cached by version tag instead of needing to be fetched and placed by hand.
• A real, writeable filesystem: RPSSI (the SSI peripheral MicroPython/CircuitPython's os/rp2.Flash calls go through to erase/program flash) implements the actual JEDEC SPI-NOR command set (WREN/WRDI, status/JEDEC-ID reads, page program, sector/block erase) - the same commands real flash hardware understands - not just a register stub. rp2040js has the same gap MicroPython/CircuitPython on rp2040py used to have (see docs/records/0008-ssi-flash-write.md's "SSI flash-write support"): on-device open(path, "w")/os.remove()/... genuinely persist to the emulated flash now, instead of raising/no-opping against an unimplemented peripheral.
• A filesystem toolkit: mklittlefs builds a littlefs image on the host (needs littlefs-python, the optional fs extra); --dump-fs builds one without that dependency instead, by writing files to a booted device's real filesystem the normal way and reading the resulting flash region back out - see mpremote and Filesystem support above.
• A programmatic device API (rp2040py.device.MicroPythonDevice/KalumaDevice) for driving a booted device from another Python program over the raw-REPL protocol (device.exec("print(1+1)")) - the same API micropython -c/-m/<filename> and --tcp-port themselves are built on, not a separate implementation. --tcp-port/--pty in particular let any serial-oriented external tool - mpremote chief among them, including its own bare interactive REPL via rp2040py mpremote (see mpremote) - drive the emulator over a real socket or pty, something rp2040js has no analogue for at all (no pty/socket-backed USB-CDC passthrough anywhere in its source, only stdio-driven demo scripts).
• Broader firmware coverage: MicroPython, CircuitPython, and Kaluma (a second, independent USB-CDC-console JS runtime for RP2040 - unrelated to rp2040js despite both being JS) all boot and run against this emulator; a built-in GDB server (--gdb) works against any of them.
• machine.reset()/machine.bootloader() actually reset the device: rp2040js's own RPWatchdog.onWatchdogTrigger (src/peripherals/watchdog.ts) defaults to logging "Watchdog triggered, but no reset handler provided" and does nothing else - the emulated CPU spins forever waiting for a reset that never happens. rp2040py's RPWatchdog.on_watchdog_trigger performs a real in-place reset (CPU core, PWM/DMA/USB-CDC peripheral state) and jumps back to flash's entry point, preserving flash/filesystem content and every externally-referenced peripheral object's identity - mpremote reset/mpremote bootloader (the latter performs the same reset rather than entering actual BOOTSEL mode, which isn't implemented) both return promptly instead of hanging.
• Configurable bootrom revision (--bootrom b0/b1/b2, or a local .elf/.bin) - see Bootrom revisions below - auto-downloaded and cached the same way firmware images are. rp2040js ships exactly one hardcoded bootrom build (demo/bootrom.ts, revision B1), with no way to select a different revision at all.
• An optional native-compiled backend (rp2040py.native, Cython) for when pure-Python instruction dispatch is the bottleneck - see Performance above - alongside a pure-Python universal wheel for environments that can't load compiled extensions at all (e.g. Pythonista, see Installation).
• Pico W / CYW43439 WiFi emulation (--board pico_w) - real network.WLAN calls (active()/scan()/connect()) against a real, unmodified MicroPython firmware's CYW43439 driver are answered at the actual gSPI/SDPCM protocol level, not stubbed out, and a NAT bridge carries the guest's TCP/UDP traffic onto your host's real network (socket, mip.install() and ntptime all reach the actual internet) - something rp2040js has no equivalent of at all (no --board concept, no WiFi chip emulation). See WiFi (Pico W / CYW43439) above.
• A real extension point for third-party hardware (ExternalDevice/boards.BoardSpec) - rp2040js has no board or device abstraction at all, only whatever's hardcoded into its own demo scripts. rp2040py ships 19 worked --board-spec examples for real vendor boards (WeAct Studio, four Waveshare boards, VCC-GND Studio, three Adafruit boards, McHobby's PYBStick26, Machdyne, nullbits, Pimoroni, Seeed Studio, SparkFun, two 0xCB boards), every electrical fact cited to that board's own upstream firmware source and live-boot-verified, plus a documented how-to for writing your own. See External devices & custom boards above.

See docs/reference/porting-checklist.md#known-differences-from-rp2040js for the exhaustive, file-level breakdown (including behavioral divergences found while porting, not just added features).

Used by

• ballistics-lab/micropython-bclibc — tests its RP2040 usermod/natmod builds in CI by actually booting real firmware through this emulator (o-murphy/rp2040py/.github/actions/setup-rp2040py), not just compiling it.

Learn more

• rp2040js — the upstream TypeScript emulator this project is ported from.
• docs/reference/porting-checklist.md — port status, file by file.
• docs/reference/os-compatibility.md — OS × feature compatibility matrix.
• docs/reference/mpremote.md — using mpremote with rp2040py in full.
• docs/reference/external-devices-and-boards.md — writing your own ExternalDevice/BoardSpec.
• docs/0000-TRACKER.md — the engineering-notes index behind every design decision cited above (docs/records/).
• demo/README.md — what each demo script does, and a gallery of real emulator output.

License

Released under the MIT license. Copyright (c) 2021, Uri Shaked. Copyright (c) 2026, Dmytro Yaroshenko.