Skip to main content

soma-shades

CI PyPI Python License: MIT

Control Soma Smart Shades over Bluetooth LE, without the SOMA Connect hub, and add them to Home Assistant through MQTT.

┌──────────────┐               ┌──────────────────────┐          ┌───────────┐          ┌────────────────┐
│ Soma Smart   │ Bluetooth LE  │ Soma Bridge          │   MQTT   │ Mosquitto │   MQTT   │ Home Assistant │
│ Shades       │◄─────────────►│ connection per shade │◄────────►│ broker    │◄────────►│                │
│              │               │ keepalive, reconnect │          │           │          │                │
└──────────────┘               └──────────────────────┘          └───────────┘          └────────────────┘
  • soma command line tool: discover the shades, move them, read the position and battery level.
  • MQTT bridge: the shades appear as covers in Home Assistant, with live position updates, battery and solar panel sensors.
  • Reliable connections: keepalive, automatic reconnects, and no unavailable flapping on short connection drops.
  • Runs anywhere near the shades: Docker image, or a systemd service on a Raspberry Pi.

Only the SOMA Smart Shades 2 are supported. The Smart Shades 3 use a different protocol and are planned for a next version. This project is not affiliated with Soma.

Quick start

Requirements: Python 3.11+, a Bluetooth LE adapter within range of the shades (Linux with BlueZ, or macOS), and for Home Assistant an MQTT broker.

pip install soma-shades                     # or: uv tool install soma-shades

soma discover                               # find the shades, "Living Room" in the Soma app is living_room
soma control living_room down
soma control living_room set_position 50    # 0 is open, 100 is closed
soma bridge --broker 192.168.1.10           # bridge to Home Assistant

A shade accepts a single Bluetooth connection: close the Soma app and stop the bridge before using soma control.

Home Assistant Integration

  1. Install an MQTT broker: the Mosquitto add-on on Home Assistant OS, or a Mosquitto container with the Docker Compose file.
  2. Add the MQTT integration with the address of the broker.
  3. Start the bridge. Every shade appears as a device through MQTT discovery, with a cover, sensors for the battery level, battery voltage and solar panel voltage, and a Sync time button that sets the clock of the shade for the schedules of the Soma app. On the first connection the shade beeps once.

New shades are found when the bridge starts, or when you publish a scan duration in seconds while it runs:

mosquitto_pub -h <broker> -t homeassistant/cover/discover -m 20

To remove a shade, remove it from the cache file and delete the device in Home Assistant, which also clears its retained discovery messages.

MQTT topics
Topic Direction Payload
homeassistant/cover/smartshade/<shade>/config publish discovery message
homeassistant/cover/smartshade/<shade>/availability publish online, offline
homeassistant/cover/smartshade/<shade>/state publish open, closed, opening, ...
homeassistant/cover/smartshade/<shade>/position publish 0 (open) to 100 (closed)
homeassistant/cover/smartshade/<shade>/battery publish battery level, 0 to 100
homeassistant/cover/smartshade/<shade>/battery_voltage publish battery voltage in mV
homeassistant/cover/smartshade/<shade>/solar_panel publish solar panel voltage in mV
homeassistant/sensor/smartshade/<shade>_<sensor>/config publish discovery messages of the sensors
homeassistant/button/smartshade/<shade>_sync_time/config publish discovery message of the button
homeassistant/cover/smartshade/bridge/availability publish online, offline (last will)
homeassistant/cover/smartshade/<shade>/set subscribe open, close, stop
homeassistant/cover/smartshade/<shade>/set_position subscribe 0 to 100
homeassistant/cover/smartshade/<shade>/sync_time subscribe any payload sets the clock
homeassistant/cover/discover subscribe scan duration in seconds (max 30)
homeassistant/status subscribe online republishes all messages

All published messages are retained, so Home Assistant also gets the covers when it starts after the bridge.

How the bridge works

  • Each shade has its own connection, reconnected with a backoff from 1 second up to 5 minutes.
  • The shades drop idle connections after 3 minutes, so the bridge reads the battery every 2 minutes.
  • A shade is only reported unavailable when it cannot be reconnected within 2 minutes.

Running the bridge as a service

Docker Compose

The docker-compose.yml runs Mosquitto and the bridge. The bridge uses the Bluetooth of the host through D-Bus, so the host must be Linux with BlueZ. It scans for shades when it starts, and uses the timezone of the host for the Sync time button.

curl -LO https://raw.githubusercontent.com/vanderkley/soma-shades/main/docker-compose.yml
mkdir -p deploy/mosquitto
curl -Lo deploy/mosquitto/mosquitto.conf \
    https://raw.githubusercontent.com/vanderkley/soma-shades/main/deploy/mosquitto/mosquitto.conf
docker compose up -d
docker compose logs -f soma-bridge

Raspberry Pi with systemd

The systemd unit runs the bridge as your user, with the broker on localhost:

sudo apt-get install bluetooth pi-bluetooth pipx
sudo usermod -aG bluetooth $USER
pipx install soma-shades

sudo curl -Lo /etc/systemd/system/soma-bridge@.service \
    https://raw.githubusercontent.com/vanderkley/soma-shades/main/deploy/systemd/soma-bridge@.service
sudo systemctl daemon-reload
sudo systemctl enable --now soma-bridge@$USER
journalctl -u soma-bridge@$USER -f

For another broker, set Environment=SOMA_BROKER=... with sudo systemctl edit soma-bridge@$USER.

Mosquitto on Linux, without Docker
sudo apt-get install mosquitto mosquitto-clients
sudo tee /etc/mosquitto/conf.d/soma-shades.conf <<EOF
listener 1883 0.0.0.0
allow_anonymous true
EOF
sudo systemctl restart mosquitto

allow_anonymous true lets every host on the network connect. Only expose port 1883 on your local network, or configure a password file and start the bridge with --username and --password.

Command line

Command Description
soma discover Scan for shades and add them to the cache
soma control SHADE ACTION [VALUE] Run an action on a shade, see below
soma bridge Bridge the shades to Home Assistant through MQTT
soma probe-sounds SHADE Play the sound codes one by one

Actions of soma control:

  • Move: up, down, stop, set_position VALUE (0 is open, 100 is closed)
  • Read: position, battery, battery_voltage, solar_panel, motor_speed, info
  • Other: set_motor_speed VALUE (0 to 100), sync_time, beep

Run soma COMMAND --help for the options and soma -v COMMAND for debug logging. The options can also be set with the environment variables SOMA_CACHE_FILE, SOMA_BROKER, SOMA_PORT, SOMA_USERNAME, SOMA_PASSWORD and SOMA_DISCOVER.

Troubleshooting

Check the Bluetooth access on Linux:

ls -l /run/dbus/system_bus_socket     # the D-Bus socket exists
systemctl status bluetooth            # active (running)
bluetoothctl show                     # Powered: yes
Error Cause
FileNotFoundError no D-Bus socket; in Docker, /run/dbus is not mounted
AccessDenied, PermissionError D-Bus or AppArmor denies the access to BlueZ, or the user is not in bluetooth
No Bluetooth adapters found bluetoothd runs without an adapter, check bluetoothctl show and rfkill list
  • A shade stays unavailable: run soma -v bridge and look for Cannot connect. Check the range with soma control <shade> battery while the bridge is stopped.
  • The Home Assistant Bluetooth integration competes for the same adapter. Give it a separate adapter, or disable it.

Python API

import asyncio

from soma_shades import ShadeFleet


async def main() -> None:
    fleet = ShadeFleet()  # the shades from the cache
    if not fleet.shades:
        await fleet.discover(scan_for=20)

    shade = fleet.get("living_room")
    await shade.connect(timeout=15)
    try:
        print(await shade.get_position(), await shade.get_battery_level())
        await shade.set_position(50)
    finally:
        await shade.disconnect()


asyncio.run(main())

Development

See CONTRIBUTING.md for the development setup, the checks and the release steps.

Credits

Thanks to rzuppur/smart-shades-documentation for the protocol documentation, and andersonshatch/soma-ctrl for the original Node.js implementation. Licensed under MIT.

Metadata

Release files for soma-shades 1.1.0

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for soma-shades 1.1.0
File Size Uploaded Provenance Actions
soma_shades-1.1.0.tar.gz 34.9 kB With provenance Details for soma_shades-1.1.0.tar.gz

Built distribution (wheel)

Table of built distributions (wheels) for soma-shades 1.1.0
File Interpreter ABI Platform Actions
soma_shades-1.1.0-py3-none-any.whl Python 3 none any Details for soma_shades-1.1.0-py3-none-any.whl

Total release size: 64.4 kB

Release files / soma_shades-1.1.0.tar.gz

Download URL soma_shades-1.1.0.tar.gz
Size 34.9 kB
Tags Source
SHA-256 checksum
How to use checksums
02f4c6b7abd4e92263b522c2b7bbe8bf9c5648436a1412fb2da3df7542d6df06
BLAKE2b-256 checksum
How to use checksums
538e47e3918e104b8ae5a93234a5112cfa63f6384bf924a654a4d425f174f3fd
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Oct 28, 2026.

Transparency log

Release files / soma_shades-1.1.0-py3-none-any.whl

Download URL soma_shades-1.1.0-py3-none-any.whl
Size 29.5 kB
Tags Python 3
SHA-256 checksum
How to use checksums
96adcbb4800b9d4937c577f5ba372358bc89c5d096a4edfd2facc806f052f7a2
BLAKE2b-256 checksum
How to use checksums
f94ab9381407d5d1efef535e85fe821d9fbada383b28fc81c7465ad6d7d0af83
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Oct 28, 2026.

Transparency log

Security for soma-shades 1.1.0

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

Full provenance

Both files in this release have been uploaded with provenance metadata.

Select from 2 files

Attestation for soma_shades-1.1.0.tar.gz

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Oct 28, 2026.

Transparency log

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

To learn more about protecting yourself from malicious actors, visit our package security documentation.

Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page