TemField

Radiated EMC susceptibility measurements in (G)TEM waveguides using mpylab

This software is distributed unter GPL-3 or higher. See LICENSE for details.

Installation

pip install temfield-mpylab

For an isolated application-style installation, pipx is also useful:

pipx install temfield-mpylab

This installs the package in its own environment and exposes the command line tools temfield and temfield-info on your PATH.

Command line

Start the GUI with:

temfield

Show installation and dependency information with:

temfield-info

Use temfield-info --json for machine-readable output.

AM headroom safety check

Before modulation is enabled, TEMField first levels the unmodulated field to the AM peak factor. For 80 % AM this is 1.8 * E_target. It then reduces the signal-generator output by 5.1 dB and checks the resulting decrease. A configured forward-power meter provides the normative IEC 61000-4-20 check; otherwise the field probe is used as an explicitly non-normative proxy. After a passed check, TEMField levels once more to the requested carrier field and only then enables AM. Failed leveling or headroom checks keep AM off and switch RF off for that frequency.

EUT monitoring

TEMField uses the shared mpylab.env.eut API. Manual EUT reporting is always available in the GUI and may be supplemented by automatic monitors for cameras, communication links, or process data. Automatic monitors run behind ThreadedEUTMonitor; they never access MGraph or switch RF themselves.

During exposure, the operator can report Degraded, Failed, or Not evaluable. After an impairment, TEMField switches AM and RF off and separately records the post-exposure state and recovery method. The table reports the result for performance criterion A, B, or C and includes the structured events in its tooltip. The post-exposure timeout is configurable in the EUT panel. A safety event is routed immediately through the measurement worker's RF-off path.

RandomEUTMonitor provides reproducible hardware-independent simulations and a starting point for custom automatic monitors. It must not be used as evidence of real EUT performance.

An application embedding the window can configure an automatic monitor before the measurement starts:

from mpylab.env.eut import RandomEUTMonitor

window.set_automatic_eut_monitor(RandomEUTMonitor(seed=42))

Structured results

Saving the measurement table writes both the selected CSV file and a JSON file with the same stem. The JSON document preserves quantities as value, uncertainty, and unit and includes the EUT event history and performance assessment.

The shared mpylab.env.immunity_result schema calls the applied test quantity disturbance. Its quantity_kind, target, and freely named measured_components are not tied to an electric field. TEMField currently records electric_field_strength with its measured probe components. The same format can represent, for example, injected_current in A or an applied voltage in a future conducted immunity application.

License

GPL-3 or higher

Repository

https://gitlab.hrz.tu-chemnitz.de/chair-of-electromagnetic-theory-and-compatibility-at-tu-dresden/mpylab/TEMField.git

Documentation

https://temfield-1012e2.gp.hrz.tu-chemnitz.de/

Contact

Prof. Dr. Hans Georg Krauthäuser (hgk@ieee.org)
Chair for Electromagnetic Theory and Compatibility
Technische Universität Dresden, Dresden, Germany