thermoprop 0.3.0

A Python thermophysical property wrapper for real fluids, ideal gases, liquid rocket propellants, and isotropic engineering materials.

ThermoProp

ThermoProp is a Python thermophysical property library for real fluids, fluid mixtures, ideal gases, ideal gas mixtures, liquid rocket propellants, and isotropic engineering materials.

It provides a unified API around CoolProp, PYroMat, RocketProps, and a built-in engineering material property database.

It provides a clean interface around:

• CoolProp
• PYroMat
• RocketProps
• Built-in Material Database
• NumPy
• SciPy

Why ThermoProp?

ThermoProp provides a unified API around CoolProp, PYroMat, RocketProps, and a built-in engineering material property database.

Instead of remembering backend-specific syntax such as:

CP.PropsSI(...)
pm.get(...)
get_prop(...)

users can write:

from thermoprop import Fluid

water = Fluid(
    "water",
    pressure=101325,
    temperature=300,
)

print(water.density)
print(water.enthalpy)

with a consistent interface for pure fluids, mixtures, ideal gases, liquid rocket propellants, and engineering materials.

Installation

pip install thermoprop

Features

Fluid

Fluid is a CoolProp-based real-fluid wrapper.

It supports:

• Pure fluids
• Fluid mixtures
• Pressure-temperature states
• Pressure-enthalpy states
• Pressure-quality states
• Temperature-quality states
• Density-based states
• Mass-fraction and mole-fraction mixtures

IdealGas

IdealGas is a PYroMat-based ideal-gas wrapper.

It supports:

• Pure ideal gases
• Ideal-gas mixtures
• Temperature states
• Enthalpy states
• Internal-energy states
• Pressure-density closure
• Cp, Cv, gamma, entropy, Gibbs energy, and speed of sound

Propellant

Propellant is a RocketProps-based liquid rocket propellant wrapper.

It supports:

• Liquid rocket propellants
• Saturated-liquid properties
• Compressed-liquid properties
• Density
• Dynamic viscosity
• Kinematic viscosity
• Thermal conductivity
• Surface tension
• Vapor pressure
• Saturation temperature
• Heat of vaporization
• Critical properties

Propellant is intended for liquid propellant engineering properties. It is not a thermodynamic flash solver and does not calculate vapor-state properties, two-phase states, enthalpy, internal energy, or entropy.

Material

Material is a built-in isotropic engineering material-property wrapper.

It provides temperature-dependent engineering material properties using ThermoProp's integrated material property database.

Supported properties include:

• Density
• Yield strength
• Ultimate strength
• Elastic modulus
• Torsional modulus
• Poisson ratio
• Thermal conductivity
• Specific heat
• Coefficient of thermal expansion
• Melting point
• Electrical resistivity

Currently supported materials include:

Aluminum Alloys

• Aluminum 6061
• Aluminum 7075

Copper Alloys

• Copper C101
• Copper C11000
• Copper C17200
• GRCop-42
• GRCop-84

Carbon & Low-Alloy Steels

• 1018 Carbon Steel
• 1045 Carbon Steel
• 3140 Low-Alloy Steel
• 4140 Steel

Stainless Steels

• Stainless Steel 303
• Stainless Steel 304
• Stainless Steel 316
• A286 Steel

Nickel-Based Superalloys

• Inconel 625
• Inconel 718

Ceramics & Non-Metals

• Graphite

MaterialRegistry

MaterialRegistry maps user-friendly aliases to canonical ThermoProp material names.

Material names can be supplied using common aliases:

from thermoprop import Material

mat = Material("in718")
mat = Material("6061")
mat = Material("304ss")

MaterialRegistry can also be used directly:

from thermoprop import MaterialRegistry

print(MaterialRegistry.name("in718"))
print(MaterialRegistry.name("6061"))
print(MaterialRegistry.name("304ss"))

Example output:

Inconel 718
Aluminum 6061
Stainless Steel 304

Custom aliases can be added at runtime:

from thermoprop import Material
from thermoprop import MaterialRegistry

MaterialRegistry.add_alias(
    "chamber alloy",
    "Inconel 718",
)

mat = Material(
    "chamber alloy",
    temperature=300,
)

print(mat.yield_strength)

Aliases can be removed using:

MaterialRegistry.remove_alias(
    "chamber alloy"
)

FluidRegistry

FluidRegistry maps user-friendly names and aliases to backend-specific names.

For example:

from thermoprop import FluidRegistry

print(FluidRegistry.coolprop_name("rp-1"))
print(FluidRegistry.propellant_name("rp-1"))

outputs different backend names:

n-Dodecane
RP1

This is intentional. Fluid("rp-1") uses CoolProp's n-Dodecane as an RP-1 surrogate, while Propellant("rp-1") uses RocketProps' actual RP1 correlation.

Thermodynamic Reference States

ThermoProp provides a unified interface to multiple thermodynamic backends.

Different property libraries may use different reference states for properties such as:

• Enthalpy
• Internal energy
• Entropy

As a result, absolute values of these properties may differ between ThermoProp classes even when pressure, temperature, and composition are identical.

For example, two wrappers representing the same physical state may report different absolute enthalpy values if their underlying thermodynamic libraries use different energy reference conventions.

This behavior is expected and does not indicate an error.

Most engineering calculations depend on property differences rather than absolute values. Properties such as:

• Temperature
• Pressure
• Density
• Specific heats
• Speed of sound
• Enthalpy differences (Δh)
• Internal-energy differences (Δu)

remain physically meaningful within each backend.

Users combining results from multiple ThermoProp wrappers should establish a consistent thermodynamic reference basis if absolute values of enthalpy, internal energy, or entropy are required.

Pure Fluid Example

from thermoprop import Fluid

water = Fluid(
    "water",
    pressure=101325,
    temperature=300,
)

print(water.density)
print(water.enthalpy)
print(water.phase)

Pressure-Enthalpy Example

from thermoprop import Fluid

water = Fluid(
    "water",
    pressure=101325,
    enthalpy=2.7e6,
)

print(water.temperature)
print(water.quality)
print(water.phase)

Mixture Example

from thermoprop import Fluid

air_like = Fluid(
    {"nitrogen": 0.79, "oxygen": 0.21},
    basis="mole",
    pressure=101325,
    temperature=300,
)

print(air_like.density)
print(air_like.specific_heat_cp)

Ideal Gas Example

from thermoprop import IdealGas

nitrogen = IdealGas(
    "gn2",
    pressure=101325,
    temperature=300,
)

print(nitrogen.density)
print(nitrogen.specific_heat_ratio)
print(nitrogen.speed_of_sound)

Propellant Example

from thermoprop import Propellant

rp1 = Propellant(
    "rp1",
    temperature=293.15,
)

print(rp1.density)
print(rp1.dynamic_viscosity)
print(rp1.vapor_pressure)

Material Example

from thermoprop import Material

inc718 = Material(
    "in718",
    temperature=300,
)

print(inc718.density)
print(inc718.yield_strength)
print(inc718.thermal_conductivity)

Compressed-Liquid Propellant Example

from thermoprop import Propellant

lox = Propellant(
    "lox",
    pressure=3e6,
    temperature=90,
)

print(lox.density)
print(lox.dynamic_viscosity)
print(lox.saturation_pressure)

Propellant Cavitation Margin Example

from thermoprop import Propellant

lox = Propellant(
    "lox",
    pressure=300000,
    temperature=90,
)

margin = lox.pressure - lox.vapor_pressure

print(margin)

Fluid Registry Examples

FluidRegistry can be used to inspect supported names, check backend support, and add custom aliases.

Check Backend Names

from thermoprop import FluidRegistry

print(FluidRegistry.coolprop_name("water"))
print(FluidRegistry.pyromat_name("gn2"))
print(FluidRegistry.propellant_name("rp-1"))

Example output:

Water
N2
RP1

For PYroMat, the ig. prefix can also be requested:

print(FluidRegistry.pyromat_name("gn2", include_prefix=True))

Example output:

ig.N2

Check Backend Support

from thermoprop import FluidRegistry

print(FluidRegistry.supports_coolprop("water"))
print(FluidRegistry.supports_pyromat("gn2"))
print(FluidRegistry.supports_propellant("rp-1"))

List Supported Names

from thermoprop import FluidRegistry

print(FluidRegistry.names)
print(FluidRegistry.coolprop_supported_names)
print(FluidRegistry.pyromat_supported_names)
print(FluidRegistry.propellant_supported_names)

You can also print supported species directly:

FluidRegistry.show_species()
FluidRegistry.show_coolprop_species()
FluidRegistry.show_pyromat_species()
FluidRegistry.show_propellant_species()

Show Aliases

ThermoProp keeps normal fluid aliases and propellant aliases separate.

from thermoprop import FluidRegistry

FluidRegistry.show_aliases()
FluidRegistry.show_propellant_aliases()

This avoids ambiguity. For example:

print(FluidRegistry.coolprop_name("rp-1"))
print(FluidRegistry.propellant_name("rp-1"))

returns:

n-Dodecane
RP1

Add Custom Aliases

Use add_alias() for Fluid and IdealGas names:

from thermoprop import Fluid, FluidRegistry

FluidRegistry.add_alias("my-water", "Water")

water = Fluid(
    "my-water",
    pressure=101325,
    temperature=300,
)

print(water.density)

Use add_propellant_alias() for Propellant names:

from thermoprop import Propellant, FluidRegistry

FluidRegistry.add_propellant_alias("my-rp1", "RP1")

rp1 = Propellant(
    "my-rp1",
    temperature=293.15,
)

print(rp1.density)

Removing aliases works the same way:

FluidRegistry.remove_alias("my-water")
FluidRegistry.remove_propellant_alias("my-rp1")

Common Properties

from thermoprop import Fluid

fluid = Fluid(
    "water",
    pressure=101325,
    temperature=300,
)

print(fluid.pressure)
print(fluid.temperature)
print(fluid.density)
print(fluid.enthalpy)
print(fluid.entropy)
print(fluid.specific_heat_cp)
print(fluid.specific_heat_cv)
print(fluid.specific_heat_ratio)
print(fluid.speed_of_sound)
print(fluid.dynamic_viscosity)
print(fluid.conductivity)

Updating State Properties

ThermoProp states can be updated after creation.

Real Fluid

from thermoprop import Fluid

water = Fluid(
    "water",
    pressure=101325,
    temperature=300,
)

water.pressure = 2e5
water.temperature = 350

print(water.density)
print(water.enthalpy)

You can also update state pairs directly:

water.pressure_temperature = (2e5, 350)
water.pressure_enthalpy = (2e5, 1.5e6)
water.pressure_quality = (101325, 0.5)
water.temperature_quality = (373.15, 1.0)

Ideal Gas

Ideal gases only require a thermal state such as temperature, enthalpy, or internal energy.

from thermoprop import IdealGas

nitrogen = IdealGas(
    "gn2",
    temperature=300,
)

print(nitrogen.enthalpy)
print(nitrogen.internal_energy)
print(nitrogen.specific_heat_cp)

Pressure is optional, but it is required for pressure-dependent properties such as density and entropy:

nitrogen.pressure = 101325

print(nitrogen.density)
print(nitrogen.entropy)

You can also update ideal-gas states:

nitrogen.temperature = 500
nitrogen.pressure_temperature = (101325, 300)
nitrogen.pressure_enthalpy = (101325, nitrogen.enthalpy)

Propellant

Propellants require temperature. Pressure is optional.

from thermoprop import Propellant

rp1 = Propellant(
    "rp1",
    temperature=293.15,
)

print(rp1.density)
print(rp1.specific_heat_cp)

If pressure is omitted, saturated-liquid properties are used.

rp1.pressure = 2e6

print(rp1.density)
print(rp1.dynamic_viscosity)

You can also update the propellant state pair directly:

rp1.pressure_temperature = (2e6, 300)

Propellant Limitations

Propellant wraps RocketProps liquid propellant correlations.

It is intended for liquid engineering properties and does not calculate:

• Mixture properties
• Vapor-state properties
• Two-phase flash states
• Enthalpy
• Internal energy
• Entropy
• Cv
• Specific heat ratio
• Speed of sound

Unsupported properties raise NotImplementedError.

Ideal-Gas Viscosity Limitation

IdealGas.dynamic_viscosity uses Sutherland's law.

Currently, viscosity is only supported for selected pure gases, including:

• Air
• Argon
• Carbon dioxide
• Carbon monoxide
• Nitrogen
• Oxygen
• Hydrogen
• Water vapor

Mixture viscosity is not currently supported.

from thermoprop import IdealGas

air = IdealGas(
    "air",
    pressure=101325,
    temperature=300,
)

print(air.dynamic_viscosity)

If viscosity data is unavailable for a gas, ThermoProp raises NotImplementedError.

Material Limitations

Material currently provides temperature-dependent isotropic engineering material properties.

It does not currently support:

• Anisotropic materials
• Composite materials
• Stress-strain curves
• Fatigue data
• Fracture mechanics properties
• Creep data
• Pressure-dependent material behavior

Attempting to access unsupported thermodynamic properties such as enthalpy, entropy, viscosity, or vapor quality will raise NotImplementedError.

Acknowledgments

ThermoProp's isotropic material property database was adapted from material property data compiled and distributed through the MatProtLib project.

The author gratefully acknowledges Tyson Tran and the MatProtLib project for making these engineering material datasets publicly available.

MatProtLib:

https://github.com/tysontran/MatProtLib

Source Code

GitHub:

https://github.com/saakethramoju/ThermoProp

License

ThermoProp is released under the GNU General Public License v3.0.

See LICENSE and THIRD_PARTY_LICENSES.md.