Skip to main content

Python module to interface with Tuya WiFi smart devices

Project description

TinyTuya

Build Status PyPI version

Python module to interface with Tuya WiFi smart devices

Description

This python module to control and monitor WiFi Tuya compatible Smart Devices (Plugs, Switches, Lights, Window Covers, etc.). This is a compatible replacement for the pytuya PyPi module.

NOTE This module requires the devices to have already been activated by Smart Life App (or similar).

TinyTuya Setup

Install pip and python libraries if you haven't already.

# Install required libraries
 sudo apt-get install python-crypto python-pip  # for RPi, Linux
 python3 -m pip install pycryptodome            # or pycrypto or Crypto or pyaes
 python3 -m pip install tinytuya                # this module 

Tuya Device Preparation

Pulling data from Tuya devices on your network requires that you know the Device IP, ID, VERSION and LOCAL_KEY (for 3.3 devices). The tinytuya module has a built in network scanner that can be used to find Tuya Devices on your local network (provides IP, ID and VERSION). Starting with v1.1.0, tinytuya also has a built in setup Wizard that will poll the Tuya IoT Cloud Platform and print a JSON list of all your registered devices (provides Name, ID and LOCAL_KEY). The following steps will help you determine the settings for your Tuya devices:

Get the Tuya Device LOCAL_KEY

  1. Download the "Smart Life" - Smart Living app for iPhone or Android. Pair with your smart plug (this is important as you cannot monitor a plug that has not been paired).
  2. Get device IP, ID and VERSION: Run the tinytuya scan to get a list of Tuya devices on your network along with their device IP, ID and VERSION number (3.1 or 3.3)
    python3 -m tinytuya
    
  3. Get device LOCAL_KEY: Devices running the latest protocol version 3.3 (e.g. Firmware 1.0.5 or above) will require a device LOCAL_KEY to read the status. Both 3.1 and 3.3 devices will require a device LOCAL_KEY to control the device. Follow these instructions to get the LOCAL_KEY:
  • From iot.tuya.com
    • Create a Tuya Developer account on iot.tuya.com and log in.
    • Go to Cloud Development -> Create a project (note the Authorization Key: API ID and Secret for below)
    • Go to Cloud Development -> select your project -> Project Overview -> Linked Device -> Link devices by App Account (tab)
    • Click 'Add App Account' and it will display a QR code. Scan the QR code with the Smart Life app on your Phone (see step 1 above) by going to the "Me" tab in the Smart Life app and clicking on the QR code button [..] in the upper right hand corner of the app. When you scan the QR code, it will link all of the devices registered in your Smart Life app into your Tuya IoT project.
    • Verify under Cloud Development -> select your project -> API Setting that the following API groups have status "Open": Authorization management, Device Management and Device Control (see here)
  • From your Local Workstation
    • From your PC/Mac run the TinyTuya Setup Wizard to fetch the Device LOCAL_KEYs for all of your registered devices:
    python3 -m tinytuya wizard
    
    • The Wizard will prompt you for the API ID key, API Secret, API Region (us, eu, cn or in) from your Tuya IoT project noted above. It will also ask for a sample Device ID. Use one from step 2 above or found in the Device List on your Tuya IoT project.
    • The Wizard will poll the Tuya IoT Platform and print a JSON list of all your registered devices with the "name", "id" and "key" of your registered device(s). The "key"s in this list are the Devices' LOCAL_KEY you will use to poll your device.
    • In addition to displaying the list of devices, Wizard will create a local file devices.json. TinyTuya will use this file to provide additional details to scan results from tinytuya.scanDevices() or when running python3 -m tinytuya to scan your local network.

Notes:

  • If you ever reset or re-pair your smart devices, they will reset their LOCAL_KEY and you will need to repeat these steps above.
  • The TinyTuya Wizard was inspired by the TuyAPI CLI which is an alternative way to fetch the LOCAL_KEYs: npm i @tuyapi/cli -g and run tuya-cli wizard
  • For a helpful video walk-through of getting the LOCAL_KEYs you can also watch this great Tech With Eddie YouTube tutorial: https://youtu.be/oq0JL_wicKg.

Programming with TinyTuya

TinyTuya Module Classes and Functions

Global Functions
    devices = scanDevices()            # returns dictionary of devices found on local network
    scan()                             # interactive scan of local network
    wizard()                           # interactive setup wizard

Classes
    OutletDevice(dev_id, address, local_key=None, dev_type='default')
    CoverDevice(dev_id, address, local_key=None, dev_type='default')
    BulbDevice(dev_id, address, local_key=None, dev_type='default')

        dev_id (str): Device ID e.g. 01234567891234567890
        address (str): Device Network IP Address e.g. 10.0.1.99
        local_key (str, optional): The encryption key. Defaults to None.
        dev_type (str): Device type for payload options (see below)

 Functions
    json = status()                    # returns json payload from device
    set_version(version)               # 3.1 [default] or 3.3
    set_socketPersistent(False/True)   # False [default] or True
    set_socketNODELAY(False/True)      # False or True [default]
    set_socketRetryLimit(integer)      # retry count limit [default 5]
    set_dpsUsed(dpsUsed)               # set data points (DPs)
    set_retry(retry=True)              # retry if response payload is truncated
    set_status(on, switch=1)           # Set status of the device to 'on' or 'off' (bool)
    set_value(index, value)            # Set int value of any index.
    turn_on(switch=1):
    turn_off(switch=1):
    set_timer(num_secs):

    CoverDevice:
        open_cover(switch=1):  
        close_cover(switch=1):
        stop_cover(switch=1):

    BulbDevice
        set_colour(r, g, b):
        set_white(brightness, colourtemp):
        set_white_percentage(brightness=100, colourtemp=0):
        set_brightness(brightness):
        set_brightness_percentage(brightness=100):
        set_colourtemp(colourtemp):
        set_colourtemp_percentage(colourtemp=100):
        set_scene(scene):             # 1=nature, 3=rave, 4=rainbow
        set_mode(mode='white'):       # white, colour, scene, music
        result = brightness():
        result = colourtemp():
        (r, g, b) = colour_rgb():
        (h,s,v) = colour_hsv()
        result = state():

Example Usage

See the sample python script test.py for an OutletDevice example or look in the [examples] directory for other scripts.

    import tinytuya

    """
    OUTLET Device
    """
    d = tinytuya.OutletDevice('DEVICE_ID_HERE', 'IP_ADDRESS_HERE', 'LOCAL_KEY_HERE')
    d.set_version(3.3)
    data = d.status()  

    # Show status and state of first controlled switch on device
    print('Dictionary %r' % data)
    print('State (bool, true is ON) %r' % data['dps']['1'])  

    # Toggle switch state
    switch_state = data['dps']['1']
    data = d.set_status(not switch_state)  # This requires a valid key
    if data:
        print('set_status() result %r' % data)

    # On a switch that has 4 controllable ports, turn the fourth OFF (1 is the first)
    data = d.set_status(False, 4)
    if data:
        print('set_status() result %r' % data)
        print('set_status() extra %r' % data[20:-8])

    """
    RGB Bulb Device
    """
    d = tinytuya.BulbDevice('DEVICE_ID_HERE', 'IP_ADDRESS_HERE', 'LOCAL_KEY_HERE')
    d.set_version(3.3)  # IMPORTANT to set this regardless of version
    data = d.status()

    # Show status of first controlled switch on device
    print('Dictionary %r' % data)

    # Set to RED Color - set_colour(r, g, b):
    d.set_colour(255,0,0)  

    # Brightness: Type A devices range = 25-255 and Type B = 10-1000
    d.set_brightness(1000)

    # Set to White - set_white(brightness, colourtemp):
    #    colourtemp: Type A devices range = 0-255 and Type B = 0-1000
    d.set_white(1000,10)

Encryption notes

These devices uses AES encryption which is not available in the Python standard library. There are three options:

  1. PyCryptodome (recommended)
  2. PyCrypto
  3. pyaes (note Python 2.x support requires https://github.com/ricmoo/pyaes/pull/13)

Scan Tool

The function tinytuya.scan() will listen to your local network (UDP 6666 and 6667) and identify Tuya devices broadcasting their IP, Device ID, ProductID and Version and will print that and their stats to stdout. This can help you get a list of compatible devices on your network. The tinytuya.deviceScan() function returns all found devices and their stats (via dictionary result).

You can run the scanner from the command line using this:

python -m tinytuya

By default, the scan functions will retry 15 times to find new devices. If you are not seeing all your devices, you can increase max_retries by passing an optional arguments (eg. 50 retries):

# command line
python -m tinytuya 50
# invoke verbose interactive scan
tinytuya.scan(50)

# return payload of devices
devices = tinytuya.deviceScan(false, 50)

Notes

  • Tuya devices only allow one TCP connection at a time. Make sure you close the TuyaSmart or SmartLife app before using TinyTuya to connect.
  • Some devices ship with older firmware that may not work with TinyTuya. If you're experiencing issues, please try updating the device's firmware in the official app.
  • The LOCAL KEY for Tuya devices will change every time a device is removed and re-added to the TuyaSmart app. If you're getting decrypt errors, try getting the key again as it might have changed.

Tuya Data Points - DPS Table

The Tuya devices send back data points (DPS) also called device function points, in a json string. The DPS attributes define the state of the device. Each key in the DPS dictionary refers to key value pair, the key is the DP ID and its value is the dpValue. You can refer to the Tuya developer platform for definition of function points for the products.

The following table represents several of the standard Tuya DPS values and their properties. It represents data compiled from Tuya documentation and self-discovery. Devices may vary. Feedback or additional data would would be appreciated. Please submit a Issue or Pull Request if you have additional data that would be helpful for others.

Version 3.1 Devices

Version 3.1 - Plug or Switch Type

DP ID Function Point Type Range Units
1 Switch bool True/False
2 Countdown? integer 0-86400 s
4 Current integer 0-30000 mA
5 Power integer 0-50000 W
6 Voltage integer 0-5000 V

Version 3.1 - Light Type (RGB)

DP ID Function Point Type Range Units
1 Switch bool True/False
2 Mode enum white,colour,scene,music
3 Bright integer 10-1000
4 Color Temp integer 0-1000
5 Color hexstring r:0-255,g:0-255,b:0-255,h:0-360,s:0-255,v:0-255 rgb+hsv

Version 3.3 Devices

Version 3.3 - Plug, Switch, Power Strip Type

DP ID Function Point Type Range Units
1 Switch 1 bool True/False
2 Switch 2 bool True/False
3 Switch 3 bool True/False
4 Switch 4 bool True/False
5 Switch 5 bool True/False
6 Switch 6 bool True/False
7 Switch 7/usb bool True/False
9 Countdown 1 integer 0-86400 s
10 Countdown 2 integer 0-86400 s
11 Countdown 3 integer 0-86400 s
12 Countdown 4 integer 0-86400 s
13 Countdown 5 integer 0-86400 s
14 Countdown 6 integer 0-86400 s
15 Countdown 7 integer 0-86400 s
17 Add Electricity integer 0-50000 kwh
18 Current integer 0-30000 mA
19 Power integer 0-50000 W
20 Voltage integer 0-5000 V
21 Test Bit integer 0-5 n/a
22 Voltage coe integer 0-1000000
23 Current coe integer 0-1000000
24 Power coe integer 0-1000000
25 Electricity coe integer 0-1000000
26 Fault fault ov_cr

Version 3.3 - Dimmer Switch

DP ID Function Point Type Range Units
1 Switch bool True/False
2 Brightness integer 10-1000
3 Minimum of Brightness integer 10-1000
4 Type of light source1 enum LED,incandescent,halogen
5 Mode enum white

Version 3.3 - Light Type (RGB)

DP ID Function Point Type Range Units
20 Switch bool True/False
21 Mode enum white,colour,scene,music
22 Bright integer 10-1000
23 Color Temp integer 0-1000
24 Color hexstring h:0-360,s:0-1000,v:0-1000 hsv
25 Scene string n/a
26 Left time integer 0-86400 s
27 Music string n/a
28 Debugger string n/a
29 Debug string n/a

Version 3.3 - Automated Curtain Type

DP ID Function Point Type Range Units
1 Curtain Switch 1 enum open, stop, close, continue
2 Percent control 1 integer 0-100 %
3 Accurate Calibration 1 enum start, end
4 Curtain Switch 2 enum open, stop, close, continue
5 Percent control 2 integer 0-100
6 Accurate Calibration 2 enum start, end
8 Motor Steer 1 enum forward, back
9 Motor steer 2 enum forward, back
10 Quick Calibration 1 integer 1-180 s
11 Quick Calibration 2 integer 1-180 s
12 Motor Mode 1 enum strong_power, dry_contact
13 Motor Mode 2 enum strong_power, dry_contact
14 Light mode enum relay, pos, none

Version 3.3 - Fan Switch Type

DP ID Function Point Type Range Units
1 Fan switch bool True/False n/a
2 Fan countdown integer 0-86400 s
3 Fan speed enum level_1, level_2, level_3, level_4, level_5
4 Fan speed integer 1-100 %
5 Fan light switch bool True/False
6 Brightness integer integer 10-1000
7 Fan light countdown integer 0-86400
8 Minimum brightness integer 10-1000
9 Maximum brightness integer 10-1000
10 Mode enum white
11 Power-on state setting enum off, on, memory
12 Indicator status setting enum none, relay, pos
13 Backlight switch bool True/False

Version 3.3 - Sensor Type

DP ID Function Point Type Range Units
1 Door Sensor bool True/False
2 Battery level state enum low, middle, high
3 Battery level integer 0-100 %
4 Temper alarm bool True/False
5 Flooding Detection State enum alarm, normal
6 Luminance detection state enum low, middle, high, strong
7 Current Luminance integer 0-100 %
8 Current Temperature integer 400-2000
9 Current Humidity integer 0-100 %
10 Shake State enum normal, vibration, drop, tilt
11 Pressure State enum alarm, normal
12 PIR state enum pir, none
13 Smoke Detection State enum alarm, normal
14 Smoke value integer 0-1000
15 Alarm Volume enum low, middle, high, mute
16 Alarm Ringtone enum 1, 2, 3, 4, 5
17 Alarm Time integer 0-60 s
18 Auto-Detect bool True/False
19 Auto-Detect Result enum checking, check_success, check_failure, others
20 Preheat bool True/False
21 Fault Alarm fault fault, serious_fault, sensor_fault, probe_fault, power_fault Barrier
22 Lifecycle bool True/False
23 Alarm Switch bool True/False
24 Silence bool True/False
25 Gas Detection State enum alarm, normal
26 Detected Gas integer 0-1000
27 CH4 Detection State enum alarm, normal
28 CH4 value integer 0-1000
29 Alarm state enum alarm_sound, alarm_light, alarm_sound_light, normal
30 VOC Detection State enum alarm, normal
31 VOC value integer 0-999
32 PM2.5 state enum alarm, normal
33 PM2.5 value integer 0-999
34 CO state enum alarm, normal
35 CO value integer 0-1000
36 CO2 Detection State enum alarm, normal
37 CO2 value integer 0-1000
38 Formaldehyde Detection State enum alarm, normal
39 CH2O value integer 0-1000
40 Master mode enum disarmed, arm, home, sos
41 Air quality index enum level_1, level_2, level_3, level_4, level_5, level_6

Tuya References

Credits

Related Projects

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distributions

No source distribution files available for this release.See tutorial on generating distribution archives.

Built Distribution

tinytuya-1.1.1-py2.py3-none-any.whl (22.9 kB view hashes)

Uploaded Python 2 Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page