tracetorch 0.18.3

A strict, ergonomic, and powerful library for SNNs, RNNs and SSMs in PyTorch.

traceTorch

A strict, ergonomic, and powerful library for SNNs, RNNs and SSMs in PyTorch.

Table of contents:

• Introduction
• Features
• Documentation
• Installation
• Quickstart
• Examples
• Authors
• Contributing
• Roadmap

Introduction

traceTorch is a unified library for a wide array of recurrent networks in PyTorch: Spiking Neural Networks (SNNs), classic Recurrent Neural Networks (RNNs) and the modern State Space Models (SSMs). traceTorch enforces a simple, albeit slightly unorthodox rule that should have been the default all along: hidden states stay hidden. But that's not to say that they're inaccessible. On the contrary, traceTorch is designed to make state management easier than ever. They are lazily created in the forward pass, work with any target dimension, and most importantly are easy to clear, detach, and even save and load. traceTorch makes it easy for you to mix and mash recurrent layers with any other PyTorch layer. Take a look at the quickstart section to see how the code looks like.

The library initially started as one focused on SNNs. With a slightly unorthodox, but consistent and self-explanatory naming schema, traceTorch presents 32 distinct SNN layer types built around the Leaky Integrator, and encapsulate a wide range of dynamics: duality (splitting positive and negative signals); recurrence; synapse (an extra EMA accumulator before the membrane); binary, ternary, scaled ternary, or no spiking for the output at all. But thinking a bit outside the box, and the layer mixin used for SNNs could also be used for standard RNNs. Thinking even more outside the box, and it becomes evident that State Space Models (SSMs) such as Mamba, are incredibly similar in concept to the Leaky Integrator, albeit a bit more complex. Subsequently, the philosophy was then extended to RNN and SSM layers. The result is an opinionated, but extremely extensive and ergonomic extension to PyTorch for RNN, SNN and SSM models, adding a total of 42 layers, with more to come:

32 SNN layers: tt.snn, based on tt.snn.Layer	3 RNN layers: tt.rnn, based on tt.rnn.Layer	7 SSM layers: tt.ssm, based on tt.ssm.Layer (note, these are not the official, optimized implementations, these are custom versions adapted to traceTorch)
Leaky Integrator (no spiking): LI, DLI, SLI, DSLI, LIEMA, DLIEMA, SLIEMA, DSLIEMA	Classic RNNs: SimpleRNN	S series: S4, S5, S6
Leaky Integrate Binary fire: LIB, DLIB, SLIB, RLIB, DSLIB, DRLIB, SRLIB, DSRLIB	LSTMs: LSTM	Mamba: Mamba
Leaky Integrate Ternary fire: LIT, DLIT, SLIT, RLIT, DSLIT, DRLIT, SRLIT, DSRLIT	GRUs: GRU	Custom, lightweight experimental variants: SelectiveSSM, SelectiveZOHSSM, SelectiveSNN
Leaky Integrate Ternary Scaled fire: LITS, DLITS, SLITS, RLITS, DSLITS, DRLITS, SRLITS, DSRLITS

But above all, the main advantage and selling point of traceTorch is with how it manages hidden states. Inheriting from tt.Model grants access to powerful recursive methods that handle all the boilerplate of state management: zero_states() and detach_states(), save_states() and load_states(), no matter how deeply hidden they are. For some networks, some parameters aren't used in their raw form, but instead need to be passed through an activation function of sorts, and to skip this redundant calculation for a trained model, the module also presents TTcompile() and TTdecompile().

And if you're dissatisfied with the range of layers, then making your own ones is also incredibly easy. Inheriting from tt.Layer (or the downstream tt.rnn.Layer or tt.snn.Layer or tt.ssm.Layer) allows you to easily create layers that integrate with the rest of the traceTorch ecosystem: making so that their hidden states are accessible and are created to the proper shape; parameters can be compiled and initialization handles learnability, rank and/or a custom tensor; helper methods to move a target dimension in and out for accessibility.

All in all, traceTorch exists to make writing, reading, debugging, and most importantly: experimenting, with recurrent networks in PyTorch to feel significantly more natural and less frustrating, while preserving (and in many cases enhancing) the expressive power needed for real models and research. traceTorch ultimately rewards users who value minimalism, composition, and long-term extensibility.

Features

By far, the most important feature of traceTorch is tt.Model as it handles all the model level boilerplate. Inheriting from tt.Model means access to the following recursive methods:

• zero_states to set all the states in the model to None, so that they get initialized correctly on the next forward pass
• detach_states to detach all the current hidden states from the computation graph, thus getting online learning
• save_states() -> Dict[str, torch.Tensor] to save the hidden states in the same way that you would save the model as a .pt or .safetensors
• load_states(states: Dict[str, torch.Tensor]) to load existing states in the same way that you would load a model's parameters from a .pt or .safetensors file
• TTcompile to turn all parameters that can be optimized into the optimized versions, used for optimizing a model that's already trained as not to do redundant calculations
• TTdecompile to turn all compiled parameters into their uncompiled versions, used for turning a compiled model back into a trainable one

traceTorch also presents tt.Layer and its downstream variants: tt.snn.Layer, tt.rnn.Layer, tt.ssm.Layer, which are used to handle the layer level boilerplate. For initialization, the layer asks for the num_neurons so that it knows what size the hidden states and parameters need to be, and dim so that it knows what dimension it's meant to be looking at. dim=-3 would hence make the layer focus on the color channel of a [B, C, H, W] tensor. There's extra methods for the downstream layer types, but the core one presents the following:

• _register_parameter to register a compileable parameter as a scalar/vector, learnable/not, value/tensor
• _initialize_state to initialize a hidden state so that it's logged and recorded and automatically managed
• _detach_state to detach a specific state from the computation graph
• detach_states to detach all initialized states from the computation graph
• _zero_state to set a specific state to None
• zero_states to set all initialized states to None
• _ensure_state to make a specific state assume the shape of the inputted tensor if it's None
• _ensure_states to make all initialized state assume the shape of the inputted tensor if it's None
• _to_working_dim to move a tensor's target dimension (from initialization) to the -1st index for comfort
• _from_working_dim to move a tensor's -1st dimension to the target dimension (from initialization)
• TTcompile to compile the layer
• TTdecompile to decompile the layer

Speaking of layers, traceTorch has a total of 42 for SNNs, RNNs, and SSMs; each of which reside in their own subdirectory: tt.snn, tt.rnn, and tt.ssm. Regardless of where the layer comes from though, it's inevitably a child of tt.Layer, which makes it integrate with tt.Model and all other PyTorch modules in a layer-like way. This means that the layers expect one input, and produce only one output. All hidden states stay hidden, internal to the layer. And it's just one layer, not a full multi-layer model. Subsequently, the design approach changes a bit: the model processes one timestep at a time, it's expected that the looping is done externally.

RNN and SSM layers are self-explanatory and follow the standard architectures. tt.rnn presents 3 layers: SimpleRNN for the classic Elman RNN, LSTM and GRU for the LSTM and GRU written in a traceTorch way. tt.ssm presents 4 standard and 3 experimental (work in progress) layers: S4, S5, S6, Mamba for the S4, S5, S6 and Mamba architectures; and SelectiveSSM, SelectiveZOHSSM, and SpikeSSM for an EMA, ZOH, and spiking alternatives to the S series. However, tt.snn is the most expansive of all, with 32 layers with a modular naming schema:

• LI base name stands for Leaky Integrator: the simplest of layer types with just one trace and decay: the membrane potential and the beta decay. No firing and no reset mechanics, this layer type is commonly known as Readout ( although it's not recommended to literally have it as the final layer).
• ~EMA suffix is only used with the LI type of neurons, and it makes the membrane act as an exponential moving average (EMA). This isn't useful in classification where you explicitly train the model return large magnitudes of values, but it's useful in other cases where the membrane magnitude need to be stable.
• ~B suffix stands for Binary, the presence of a strictly positive threshold, meaning that the layer has 2 possible outputs: a 1 or a 0. LIB is hence the official name for the LIF.
• ~T suffix stands for Ternary, meaning that the layer has 2 thresholds: a strictly positive and a strictly negative one, meaning that the layer has 3 possible outputs: 1, 0 or -1.
• ~S suffix is only used with the ~T suffix to create ~TS, which stands for Ternary Scaled, meaning that the ternary outputs are multiplicatively separately scaled based on their polarity. This is done so that the three possible outputs are truly independent when we consider the downstream layer.
• D~ prefix stads for Dual, meaning that all traces (hidden states) and their decay parameters are split into a separate positive and negative version for greater expressivity and unlocking more complex dynamics.
• S~ prefix stands for Synaptic, meaning that before the membrane there is a separate synaptic trace with its respective alpha decay that smooth out the inputs over time via an EMA before they get integrated into the membrane.
• R~ prefix stands for Recurrent, meaning that the layer records its own outputs into a separate trace with its own gamma decay and re-integrates it back into the membrane in the next timestep. The computation graph is made to work even with online learning.

Documentation

The online documentation can be found here, and it is nowhere close to being finished at the time of writing. However, once it will be, it is thoroughly recommended to at least read the introduction section before proceeding as it contains some theory behind SNNs, the traceTorch ethos and layers available as well as a brief explanation of what it is that each mechanic actually does. It also contains a couple tutorials to recreate the code found in examples/.

Installation

traceTorch is a PyPI library found here. Requirements for the library are listed in requirements.txt. Take note that examples found in examples/ may have their own requirements, separate from the library requirements.

pip install tracetorch

If you don't want to install traceTorch as a library, or just want to test the examples, you should install traceTorch as an editable installation:

git clone --branch v0.18.3 https://github.com/Yegor-men/tracetorch
cd tracetorch
pip install -e .

Make sure to check the releases page for the latest (or different) version number if you want a different release.

Quickstart

traceTorch models look barely any different from PyTorch models. Keep in mind that the example code uses positional arguments for the sake of brevity, while in reality it's recommended to use keyword only arguments for the sake of clarity.

import torch
from torch import nn
import tracetorch as tt

device = "cuda" if torch.cuda.is_available() else "cpu"


class SNN(tt.Model):
    def __init__(self):
        super().__init__()
        self.net = nn.Sequential(
            nn.Conv2d(1, 32, 3, padding=1),
            tt.rnn.GRU(in_features=16, out_features=16, dim=-3),  # RNN, dim=-3 works on the color channel dimension
            nn.MaxPool2d(2, 2),
            nn.Conv2d(32, 64, 3, padding=1),
            tt.snn.LIB(num_neurons=64, beta=torch.rand(64), dim=-3),  # SNN, can set parameters to a custom tensor too
            nn.MaxPool2d(2, 2),
            nn.Flatten(),
            nn.Linear(7 * 7 * 64, 128),
            tt.ssm.S6(num_neurons=128, d_state=16),  # S6 SSM, you can mix all the different layers into one model
            nn.Linear(128, 10)
        )

    def forward(self, x):
        return self.net(x)


model = SNN().to(device)  # move the model to a device just as before
optimizer = torch.optim.AdamW(model.parameters(), 1e-3)

# TRAINING LOOP WITH DATALOADER
model.train()
for x, y in train_dataloader:
    model.zero_states()  # sets hidden states to None for lazy assignment
    model.zero_grad()
    running_loss = 0.0
    for t in range(num_timesteps):
        model_output = model(x[t])
        loss = loss_fn(model_output, y[t])
        running_loss = running_loss + loss
        # optionally call model.detach_states() for online learning here
    running_loss.backward()
    optimizer.step()

Examples

Example code can be found in examples/. To test the code, make sure that you have the respective requirements installed for the example, and that you've either installed traceTorch from PyPI or as an editable installation.

The current examples are unfortunately rather limited: mnist/ with monotonic.py for rate-coded classification on the entire image and nonmonotonic.py for shuffled sequential MNIST with an adjustable kernel size. byte_lm/ is a personal project on a byte level language model training on wikitext-103 and BirdCLEF+2026/ is a similarly experimental project on the BirdCLEF+2026 dataset.

Authors

• @Yegor-men

Contributing

Contributions are always welcome. Feel free to fork, submit pull requests or report issues, I will occasionally check in on it.

Roadmap

traceTorch still has a long way to go. Namely:

• Fix tt.functional to be cleaner
• Clean up tt.plot plotting functions
• Clean up and make sure that the save_states and load_states work as intended without fault
• Create tests for compilation and decompilation, saving and loading
• Finish the examples/ section for example code for various examples
• Make proper requirements for each example in examples/
• Write the documentation
• Make docstrings
• Figure out versioning requirements for the library