vention-diverter-mqtt-bridge 0.6.0

MQTT control bridge for Vention popup diverters — embed in a MachineLogic snippet with one line.

vention-diverter-mqtt-bridge

An MQTT control bridge for Vention popup diverters. It wraps the published vention-popup-diverter fleet library and exposes it over a simple MQTT command protocol, so a MachineLogic program (or any MQTT client) can drive a diverter by publishing a message.

It's designed to embed in a MachineLogic Python snippet with one line — MachineLogic only runs one snippet at a time, so the bridge rides inside the snippet that's already running, in a background thread.

Use it from a MachineLogic snippet (one line)

Add the dep to your app's requirements.txt:

vention-diverter-mqtt-bridge

Then at the top of your snippet:

from diverter_bridge import run_in_background

run_in_background()        # non-blocking; bridge now serving MQTT in the background
# ... your snippet logic continues unchanged ...

run_in_background() returns immediately (it starts a daemon thread) and uses the bundled, calibrated config. Override anything from Python:

run_in_background(mode="mock")                 # bench test, no hardware
run_in_background(broker_host="127.0.0.1")     # different broker
run_in_background(fleet=[                       # different diverter / fleet
    {"location_id": "zone-a", "host": "192.168.21.20",
     "lift_speed": 600, "t_lower_from_rest": 0.5024},
])
run_in_background("config")                     # your own ./config/config.yaml

Precedence: bundled config < a config_dir you point at < keyword overrides.

The MQTT protocol

The command is the topic (empty payload). Replies on <prefix>/<location>/result → ok or error: <reason>.

Full divert (one message, runs the whole sequence):

vention/diverter/<location>/divert/forward
vention/diverter/<location>/divert/backward

Granular (drive each step yourself):

vention/diverter/<location>/move/up
vention/diverter/<location>/move/down
vention/diverter/<location>/move/forward
vention/diverter/<location>/move/backward
vention/diverter/<location>/move/stop

Direction is forward/backward at both levels. divert/… = the bridge runs the sequence; move/… = manual control. See docs/adr/0002-mqtt-protocol.md.

Standalone (for local dev / testing)

just install            # uv sync
just smoke              # local broker + bridge (mock) + a test divert
just ci                 # ruff format + lint + pytest
python -m diverter_bridge      # or: python main.py   (uses bundled config)

DIVERTER_MODE=mock selects mock diverters; CONFIG_DIR points at an override config dir.

Calibration

The bundled config ships values calibrated at lift speed 600 (t_lower_from_rest, t_full_rev, t_high_range, down_dwell). Re-calibrate with the Feed's calibrate_all_diverters.py at the operating speed and update the config — calibration speed must equal run speed.

mmAI access

SSH keypair for controller serial 6020083 is in .keypairs/mmai-6020083/ (gitignored). The mmAI's LAN port reaches the diverter subnet (192.168.21.x); the diverter is at 192.168.21.20.

Docs

Living docs/ tree per the delivery standard — start at docs/README.md.