Skip to main content

Top-down zombie survival game built with pygame.

Project description

Zombie Escape

The city is overrun with zombies! You fled the horde, taking refuge in an abandoned factory.

Inside, it's a maze. They won't get in easily. But you have no weapons. Night has fallen. The power's out, plunging the factory into darkness.

Your only tool: a single flashlight. A car... somewhere inside... it's your only hope.

Pierce the darkness and find the car! Then, escape this nightmare city!

Overview

This game is a simple 2D top-down action game where the player aims to escape by finding and driving a car out of a large building infested with zombies. The player must evade zombies, break through walls to find a path, and then escape the building in a car.

Controls

  • Player/Car Movement: W / (Up), A / (Left), S / (Down), D / (Right)
  • Enter Car: Overlap the player with the car.
  • Pause: P/Start or ESC/Select
  • Quit Game: ESC/Select (from pause)
  • Restart: R key (on Game Over/Clear screen)
  • Window/Fullscreen: [ to shrink by one step (400x300), ] to enlarge by one step, F to toggle fullscreen
  • FPS Overlay: Launch with --show-fps (implied by --debug)
  • Time Acceleration: Hold either Shift key or R1 to run the entire world 4x faster; release to return to normal speed.

Title Screen

Stages

At the title screen you can pick a stage:

  • Stage 1: Find the Car — you already start with fuel; find the car and escape.
  • Stage 2: Fuel Run — you start with no fuel; find a fuel can first, pick it up, then find the car and escape.
  • Stage 3: Rescue Buddy — same fuel hunt as Stage 2 (you begin empty) plus locate your buddy, pick them up with the car, then escape together.
  • Stage 4: Evacuate Survivors — start fueled, find the car, gather survivors, and escape before zombies reach them. The stage includes extra parked cars; ramming one while driving fully repairs your current ride and adds five seats each time.
  • Stage 5: Survive Until Dawn — every car is empty. Endure until sunrise while the horde presses in from every direction. Once dawn hits and outdoor zombies carbonize, walk out through an existing exterior gap to win; cars remain unusable.

Stages 6+ unlock after clearing Stages 1–5. On the title screen, use left/right to select later stages. Open the Stage 6+ description: docs/stages-6plus.md

Stage names are red until cleared and turn white after at least one clear.

An objective reminder is shown at the top-left during play.

Win/Lose Conditions

  • Win Condition: Escape the stage (level) boundaries while inside the car.
    • Stage 1 and Stage 4 follow the base rule: drive out of the building by car.
    • Stage 2 also requires that you have collected the fuel can before driving out.
    • Stage 3 requires meeting up with your buddy and escaping the building by car.
    • Stage 5 has no working cars; survive until dawn, then walk out through an exterior opening on foot.
  • Lose Condition:
    • The player is touched by a zombie while not inside a car.
    • In Stage 3, if your buddy is caught (when visible), it's game over.
    • (Note: In the current implementation, the game does not end immediately when the car is destroyed. The player can search for another car and continue trying to escape.)

Shared Seeds

The title screen also lets you enter a numeric seed. Type digits (or pass --seed <number> on the CLI) to lock the procedural layout, wall placement, and pickups; share that seed with a friend and you will both play the exact same stage even on different machines. The current seed is shown at the bottom right of the title screen and in-game HUD. Backspace reverts to an automatically generated value so you can quickly roll a fresh challenge.

Settings Screen

Open Settings from the title to toggle gameplay assists:

  • Footprints: Leave breadcrumb trails so you can backtrack in the dark.
  • Fast zombies: Allow faster zombie variants; each zombie rolls a random speed between the normal and fast ranges.
  • Car hint: After a delay, show a small triangle pointing toward the fuel (Stage 2 before pickup) or the car.
  • Steel beams: Adds tougher single-cell obstacles (about 5% density) that block movement.

Game Rules

Characters/Items

Characters

Name Image Notes
Player Blue circle with small hands; controlled with WASD/arrow keys. When carrying fuel, a tiny yellow square appears near the sprite.
Zombie (Normal) Chases the player once detected; out of sight it periodically switches movement modes.
Car Driveable escape vehicle; touch to enter. Durability drops from wall hits and running over zombies; if it reaches 0, the car breaks. Capacity starts at five. Ramming a parked car while driving restores health and adds +5 capacity. After ~5 minutes, a small triangle points to the current objective.
Buddy (Stage 3) Teal-blue survivor you can rescue; zombies only target them on-screen and off-screen catches just respawn them. Touch on foot to follow (70% speed), touch while driving to pick up. Helps chip away at walls you bash.
Survivors (Stage 4) Civilians to evacuate by car; they idle until approached, then follow at ~1/3 speed. On-screen zombie contact converts them. If you exceed the car's capacity, the car is damaged and everyone disembarks.

Items

Name Image Notes
Flashlight Each pickup expands your visible radius by about 20%.
Fuel Can (Stages 2 & 3) Appears only in stages that begin without fuel; pick it up to unlock driving.
Steel Beam (optional) Striped obstacle with the same collision as inner walls, but 1.5x durability. Can also appear after an inner wall is destroyed.

Environment

Name Image Notes
Outer Wall Gray perimeter walls that are nearly indestructible; each side has a single opening (exit).
Inner Wall Beige interior walls with durability. The player can break them by repeated collisions; zombies wear them down slowly; the car cannot break them.

How to Run

Requirements: Python 3.10 or higher

Install using pipx:

pipx install zombie-escape

Alternatively, you can install using pip in a virtual environment:

pip install zombie-escape

Launch using the following command line:

zombie-escape

License

This project is licensed under the MIT License - see the LICENSE.txt file for details.

This project depends on pygame-ce (repository: https://github.com/pygame-community/pygame-ce), which is licensed under GNU LGPL version 2.1.

The bundled Silkscreen-Regular.ttf font follows the license terms of its original distribution. Please refer to the upstream website for details: https://fonts.google.com/specimen/Silkscreen

The bundled misaki_gothic.ttf font (Misaki font by Num Kadoma) follows the license terms provided by Little Limit. Please refer to the official site for details: https://littlelimit.net/misaki.htm

Acknowledgements

Significant assistance for many technical implementation and documentation aspects of this game's development was received from Google's large language model, Gemini (accessed during development), and from OpenAI's GPT-5. This included generating Python/Pygame code, suggesting rule adjustments, providing debugging support, and creating this README. Their rapid coding capabilities and contributions to problem-solving are greatly appreciated.

Thanks to Jason Kottke, the author of the Silkscreen-Regular.ttf font used in the game. Thanks to Num Kadoma, the author of the Misaki font (misaki_gothic.ttf) distributed via Little Limit.

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

zombie_escape-1.18.2.tar.gz (398.4 kB view details)

Uploaded Source

Built Distribution

If you're not sure about the file name format, learn more about wheel file names.

zombie_escape-1.18.2-py3-none-any.whl (445.4 kB view details)

Uploaded Python 3

File details

Details for the file zombie_escape-1.18.2.tar.gz.

File metadata

  • Download URL: zombie_escape-1.18.2.tar.gz
  • Upload date:
  • Size: 398.4 kB
  • Tags: Source
  • Uploaded using Trusted Publishing? No
  • Uploaded via: Hatch/1.16.3 cpython/3.12.3 HTTPX/0.28.1

File hashes

Hashes for zombie_escape-1.18.2.tar.gz
Algorithm Hash digest
SHA256 8f0aa73057df291a7e549585ce5881a7ad6e593feb1625aebf62c16b887848cd
MD5 e1c17a3a6c1cc7a54dbd15a2f4c451bb
BLAKE2b-256 54bfd0bbdf24097f1183a1db16e66c03fc564bc1cc41621c1fa8825101266cd9

See more details on using hashes here.

File details

Details for the file zombie_escape-1.18.2-py3-none-any.whl.

File metadata

  • Download URL: zombie_escape-1.18.2-py3-none-any.whl
  • Upload date:
  • Size: 445.4 kB
  • Tags: Python 3
  • Uploaded using Trusted Publishing? No
  • Uploaded via: Hatch/1.16.3 cpython/3.12.3 HTTPX/0.28.1

File hashes

Hashes for zombie_escape-1.18.2-py3-none-any.whl
Algorithm Hash digest
SHA256 c629c2c3950035ed3633ae1ad3e2cc5e293034f99bcd0e8973236b8cbb9a1ce8
MD5 87ef69c573d7b64ed0707761c564af48
BLAKE2b-256 60121536a6cf4d8c668b4f32ff346a72017fc6c6e23cd09705438d09e75b6d1c

See more details on using hashes here.

Supported by

AWS Cloud computing and Security Sponsor Datadog Monitoring Depot Continuous Integration Fastly CDN Google Download Analytics Pingdom Monitoring Sentry Error logging StatusPage Status page