confocal-raytracer 0.1.33

Raytrace module

Chromatic Confocal Sensor Ray Tracer

Specialized ray tracing engine designed for simulating and optimizing chromatic confocal sensors. This repository provides a powerful toolset for researchers and engineers working on precise optical measurement systems, enabling the accurate modeling of light interactions within chromatic confocal setups.

Installation

The library can be simply installed by:

pip install confocal-raytracer

Defining the setup

The optical setup is defined inside a JSON-like file. If, for example, an achromatic doublet is defined each face of both lenses should be defined as follows:

doublet = {
    "AC500-150-A-ML_1": {
        "Front Face": dict(
            curvature=96.85, konic=0, z_0=0, aperture_radius=50 / 2
        ),
        "Back Face": dict(
            curvature=-73.74,
            konic=0,
            z_0=9.5,
            aperture_radius=50 / 2,
        ),
        "Material": "BAK4",
        "Calibration": False,
    },
    "AC500-150-A-ML_2": {
        "Front Face": dict(
            curvature=-73.74, konic=0, z_0=9.5, aperture_radius=50 / 2
        ),
        "Back Face": dict(
            curvature=-241.63,
            konic=0,
            z_0=13.5,
            aperture_radius=50 / 2,
        ),
        "Material": "SF10",
        "Calibration": False,
    },
    "AC500-150-A-ML_1_R": {
        "Front Face": dict(
            curvature=241.63,
            konic=0,
            z_0=0,
            aperture_radius=50 / 2,
        ),
        "Back Face": dict(
            curvature=73.74, konic=0, z_0=4, aperture_radius=50 / 2
        ),
        "Material": "BAK4",
        "Calibration": False,
    },
    "AC500-150-A-ML_2_R": {
        "Front Face": dict(
            curvature=73.74,
            konic=0,
            z_0=4,
            aperture_radius=50 / 2,
        ),
        "Back Face": dict(
            curvature=-96.85, konic=0, z_0=13.5, aperture_radius=50 / 2
        ),
        "Material": "SF10",
        "Calibration": False,
    },
    "Sensor": {
        "Front Face": dict(
            curvature=float("inf"),
            konic=0,
            z_0=170,
            aperture_radius=100,
        ),
        "Back Face": dict(
            curvature=float("inf"),
            konic=0,
            z_0=170,
            aperture_radius=100,
        ),
        "Material": "SF2",
        "Calibration": False,
    },
}

Lens materials

The materials available with their refractive indexes should be specified in a Pandas Data Frame. The custom spectrum intensity can also be specified in the same Data Frame as follows:

wl_nm	intensity	n_BK7	n_SF2	n_SF5	n_BAF10	n_SF10	n_BAK4	n_SF57
500.5	0.0851431638	1.5213856439764	1.6587264318676913	1.6847781738090497	1.67825	1.74315	1.57468	1.86746
500.7	0.08645302802	1.5213723632237195	1.6586929033319964	1.6847437966326086	1.6782202524647911	1.7430968741556505	1.574659846238762	1.8673847333525386
500.8	0.08502408117	1.5213657288620468	1.658676166909398	1.684726608044388	1.6782055071330022	1.7430704823647605	1.5746498284981434	1.8673473595993073
501.0	0.08721513301	1.5213524721680336	1.6586427497546976	1.6846922308679468	1.6781762683497092	1.7430180354906653	1.5746299095672376	1.86727312240276
501.1	0.08640539646	1.5213458498356942	1.658626069022597	1.684675042279726	1.6781617729016662	1.7429919781855066	1.5746200076850838	1.867236255427011

Example usage

from confocal_raytracer.simulation.raytrace import RayTrace
from confocal_raytracer.simulation.setup import chromatic_confocal
from confocal_raytracer.simulation._utils import plotter
from confocal_raytracer.load_data import n_data
import numpy as np
import matplotlib.pyplot as plt
import time
import warnings



# Ignore warning in axins legend location.
warnings.filterwarnings("ignore")

# Set refractive index of the spatial filter
n_data["n_absorb"] = np.inf

# Decimate the refractive index data to make
# the plot faster
n_data = n_data[::5]

# Get example optical data
optical_data = chromatic_confocal

# Set the pinhole size before sensor
PINHOLE_SIZE = 25 / 1000  # milimeters

# Number of rays from light source
N_RAYS = 3
# Set the extension of the light source
LIGHT_SOURCE_RADIUS = 0 / 1000  # milimeters
# Set the desviation angle with respecto to the 
# optical axis of the N_RAYS
THETA = 6.0  # Degrees
N_RAYS_HEIGHT = 1
Z0 = -33.4  # Light source position same as
# back focal length of the achormatic doublet

fig, ax = plt.subplots()

raytrace = RayTrace(
    optical_data=optical_data,
    n_data=n_data,
    light_source_radius=LIGHT_SOURCE_RADIUS,
    n_rays=N_RAYS,
    theta=THETA,
    z0=Z0,
    n_rays_height=N_RAYS_HEIGHT,
)

t0 = time.perf_counter()
frays = raytrace.intersect_full_system()
print("Elapsed time (s): ", time.perf_counter() - t0)

# Plot setup
fig, ax = plotter(optical_data=optical_data, final_rays=frays, fig=fig, ax=ax)
plt.plot(
    [
        optical_data["Sensor"]["Front Face"]["z_0"],
        optical_data["Sensor"]["Front Face"]["z_0"],
    ],
    [-PINHOLE_SIZE / 2, PINHOLE_SIZE / 2],
    c="r",
)
ax.set(xlabel="z-position (mm)", ylabel="y-position (mm)")
axins = ax.inset_axes([0.25, 0.1, 0.35, 0.35])
plotter(optical_data=optical_data, final_rays=frays, fig=fig, ax=axins)
axins.plot(
    [
        optical_data["Sensor"]["Front Face"]["z_0"],
        optical_data["Sensor"]["Front Face"]["z_0"],
    ],
    [-PINHOLE_SIZE / 2, PINHOLE_SIZE / 2],
    c="r",
    lw=3,
    label="PINHOLE",
)
x1, x2, y1, y2 = (
    optical_data["Sensor"]["Front Face"]["z_0"] - 0.1,
    optical_data["Sensor"]["Front Face"]["z_0"] + 0.1,
    -0.1,
    0.1,
)
axins.legend()
axins.set_xlim(x1, x2)
axins.set_ylim(y1, y2)
plt.gca().indicate_inset_zoom(axins, edgecolor="black")
plt.tight_layout()
plt.show()