element-calcium-imaging 0.1.0

Calcium Imaging DataJoint element

DataJoint Element - Functional Calcium Imaging

• This repository features DataJoint pipeline design for functional Calcium imaging with ScanImage, Scanbox, or Nikon NIS acquisition system and Suite2p or CaImAn suites for analysis.

• The element presented here is not a complete workflow by itself, but rather a modular design of tables and dependencies specific to the functional Calcium imaging workflow.

• This modular element can be flexibly attached downstream to any particular design of experiment session, thus assembling a fully functional calcium imaging workflow.

• See the Element Calcium Imaging documentation for the background information and development timeline.

• For more information on the DataJoint Elements project, please visit https://elements.datajoint.org. This work is supported by the National Institutes of Health.

Element architecture

• As the diagram depicts, the imaging element starts immediately downstream from Session, and also requires some notion of:

  • Scanner for equipment/device

  • Location as a dependency for ScanLocation

Table definitions

Scan

The scan schema contains information regarding the raw data acquired with ScanImage or Scanbox.

Click to expand details

• A Session (more specifically an experimental session) may have multiple scans, where each scan describes a complete 4D dataset (i.e. 3D volume over time) from one scanning session, typically from the moment of pressing the start button to pressing the stop button.

• Scan - table containing information about the equipment used (e.g. the Scanner information)

• ScanInfo - meta information about this scan, from ScanImage header (e.g. frame rate, number of channels, scanning depths, frames, etc.)

• ScanInfo.Field - a field is a 2D image at a particular xy-coordinate and plane (scanning depth) within the field-of-view (FOV) of the scan.

  • For resonant scanner, a field is usually the 2D image occupying the entire FOV from a certain plane (at some depth).

  • For mesoscope scanner, with much wider FOV, there may be multiple fields on one plane.

Preprocessing - Motion Correction

The imaging schema stores information regarding the motion corrected images.

Click to expand details

• MotionCorrection - motion correction information performed on a scan

• MotionCorrection.RigidMotionCorrection - details of the rigid motion correction (e.g. shifting in x, y) at a per ScanInfo.Field level

• MotionCorrection.NonRigidMotionCorrection and MotionCorrection.Block tables are used to describe the non-rigid motion correction performed on each ScanInfo.Field

• MotionCorrection.Summary - summary images for each ScanInfo.Field after motion correction (e.g. average image, correlation image)

Preprocessing - Segmentation

The imaging schema stores information regarding the segmented masks for each field.

Click to expand details

• Segmentation - table specifies the segmentation step and its outputs, following the motion correction step.

• Segmentation.Mask - image mask for the segmented region of interest from a particular ScanInfo.Field

• MaskClassification - classification of Segmentation.Mask into different type (e.g. soma, axon, dendrite, artifact, etc.)

Neural activity extraction

The imaging schema stores information regarding the calcium traces for each mask.

Click to expand details

• Fluorescence - fluorescence traces extracted from each Segmentation.Mask

• ActivityExtractionMethod - activity extraction method (e.g. deconvolution) to be applied on fluorescence trace

• Activity - computed neuronal activity trace from fluorescence trace (e.g. spikes)

Installation

• The installation instructions can be found at the DataJoint Elements documentation.

• Install element-calcium-imaging

  pip install element-calcium-imaging
  

• Upgrade element-calcium-imaging previously installed with pip

  pip install --upgrade element-calcium-imaging
  

• Install element-interface

  • element-interface contains data loading utilities for element-calcium-imaging.

  • element-interface is a dependency of element-calcium-imaging, however it is not contained within requirements.txt, therefore, must be installed in addition to the installation of the element-calcium-imaging.

  • element-interface can also be used to install packages used for reading acquired data (e.g. scanreader) and running analysis (e.g. CaImAn).

  • If your workflow uses these packages, you should install them when you install element-interface.

  Click to expand details

  • Install element-interface with scanreader

    pip install "element-interface[scanreader] @ git+https://github.com/datajoint/element-interface"
    

  • Install element-interface with sbxreader

    pip install "element-interface[sbxreader] @ git+https://github.com/datajoint/element-interface"
    

  • Install element-interface with Suite2p

    pip install "element-interface[suite2p] @ git+https://github.com/datajoint/element-interface"
    

  • Install element-interface with CaImAn requires two separate commands

    pip install "element-interface[caiman_requirements] @ git+https://github.com/datajoint/element-interface"
    pip install "element-interface[caiman] @ git+https://github.com/datajoint/element-interface"
    

  • Install element-interface with multiple packages

    pip install "element-interface[caiman_requirements] @ git+https://github.com/datajoint/element-interface"
    pip install "element-interface[scanreader,sbxreader,suite2p,caiman] @ git+https://github.com/datajoint/element-interface"
    

Element usage

• See workflow-calcium-imaging repository for an example usage of element-calcium-imaging.

Citation

• If your work uses DataJoint and DataJoint Elements, please cite the respective Research Resource Identifiers (RRIDs) and manuscripts.

• DataJoint for Python or MATLAB

  • Yatsenko D, Reimer J, Ecker AS, Walker EY, Sinz F, Berens P, Hoenselaar A, Cotton RJ, Siapas AS, Tolias AS. DataJoint: managing big scientific data using MATLAB or Python. bioRxiv. 2015 Jan 1:031658. doi: https://doi.org/10.1101/031658

  • DataJoint (RRID:SCR_014543) - DataJoint for <Select Python or MATLAB> (version <Enter version number>)

• DataJoint Elements

  • Yatsenko D, Nguyen T, Shen S, Gunalan K, Turner CA, Guzman R, Sasaki M, Sitonic D, Reimer J, Walker EY, Tolias AS. DataJoint Elements: Data Workflows for Neurophysiology. bioRxiv. 2021 Jan 1. doi: https://doi.org/10.1101/2021.03.30.437358

  • DataJoint Elements (RRID:SCR_021894) - Element Calcium Imaging (version <Enter version number>)