mtunn 1.2.3

Easy open tcp, http, https ports from localhost to internet.

• License • Source code • Donate • Issues •

with «make tunnel» you can easily open http and tcp ports to the internet.

Installation

Install the package from the PyPi:

pip install mtunn

Install the package from the GitHub:

git clone https://github.com/mishakorzik/mtunn
cd mtunn
python3 setup.py install

Want to learn more about the tunnel update? Then check out the details here

Config example's

In order to start the tunnel, you need to log in to your account and create a configuration file.

proto: tcp                # protocol type                   (http/tcp)
target: 127.0.0.1:25565   # target host
tunnel: 10000             # port that will be opened
domain: none              # domain to your tunnel
console: true             # for tunnel control              (true/false)
firewall:
  whitelist: ["UA", "PL"] # whitelist                       (asn, country, ip, cidr)
  blacklist: ["AS12345"]  # blacklist                       (asn, country, ip, cidr)
  services:
    vpn: allow            # connection to tunnel from vpn   (allow/deny)
    tor: deny             # connectiom to tunnel from tor   (allow/deny)
  protection:
    level: 3              # set anti ddos protection level  (0-5)
network:
  low-delay: true         # enable low delay                (true/false)
  bandwidth: nolimit      # limit bandwidth                 (ex. 20 mbits, 5 mbytes)
  data:
    compression: false    # use traffic compression         (true/false)
    algorithm: zlib       # set compression algorithm       (zlib/gzip/lzma)
ping:
  method: icmp            # ping method                     (icmp/tcp)

frequently asked questions

1) What to do if I don't have a domain?

• No need to worry, you can run tunnel without a domain just by specifying “none” in the “domain” field.

2) if I have a domain, how do i connect it?

• Using a domain is quite simple, you just need to specify your domain in the "domain" field and specify the A and AAAA record in the ip address of the tunnel.

• Please note that if the tunnel does not have IPv6, you do not need to specify an AAAA record for the tunnel's IP address.

3) What ping method is the best?

• Both options are best, we added the tcp method so that you can know the delay point without the ping command. If you are not sure about choosing icmp or tcp, you can simply not specify, the tunnel will choose automatically.

4) Do I need to enable multi threading?

• Enabling multithreading in tunnels allows for the simultaneous processing of multiple connections, enhancing performance and reducing latency. This ensures stable data transmission and reliable tunnel operation even under high load. We recommend to enable it.

If you have the correct configuration, you will be able to start the tunnel and everything will work.

Tunnel commands

Instead of the name of the example.yml file, you can write your configuration name, but it must have the extension “.yml”.

# show tunnel current version
python3 -m mtunn --version

# register or login to account
python3 -m mtunn --account

# use console to control tunnel (if enabled on config)
python3 -m mtunn --console

# open a port to internet
python3 -m mtunn --config example.yml

# open a port to internet and disable debug
python3 -m mtunn --nodebug --config example.yml

# fast open port to internet without config
# Specify your ports instead of the ones provided, and choose the protocol — TCP or HTTP.
python3 -m mtunn --fastrun 'from:8080 to:10000 proto:http'

When you register you can run tunnels but only on ports in the range from 10000 to 11000. You can change it in your quota settings.

Api example's

Scan all active tunnels on localhost (if enabled console)

>>> import mtunn
>>> mtunn.api.scan()
[{'remote': 'he1zen-de1.hopto.org:10000', 'local': '127.0.0.1:25565', 'console': 7010}]
>>> 

Execute commands on active tunnel (if enabled console)

>>> import mtunn
>>> mtunn.api.execute(7010, "latency")
'{"address": "185.14.92.125", "method": "icmp", "time": "27.1ms"}'
>>> 

• All commands that are in the console are also in the API and they are the same.

• To execute the command you only need to know the port from the console. you can find it by scanning all consoles.

• Also, the console is only available on the local network (127.0.0.1), you won't be able to launch it remotely.

Screenshots

Here are examples of how to run and how the tunnel will work.

In order to open ports through the tunnel you need to create a configuration file.

Other

If you find a bug or have any questions about this project, write to us on discord.