omega-prime 0.1.4

Omega-Prime: Data Model, Data Format and Python Library for Handling Ground Truth Traffic Data

[!IMPORTANT]
The data model and specification are not finalized and are still under discussion. See this repository as a proof of concept.

Omega-Prime: Data Model, Data Format and Python Library for Handling Ground Truth Traffic Data

Data Model, Format and Python Library for ground truth data containing information on dynamic objects, map and environmental factors optimized for representing urban traffic. The repository contains:

• Sepcification Document: to be released
  • Data Model: What signals exists and how these are defined.
  • Data Format Specification: How to exchange and store those signals.
• Python Library:
  • Creation of omega-prime files from
    • ASAM OSI GroundTruth trace (e.g., output of esmini)
    • Table of moving object data (e.g., csv data)
    • ASAM OpenDRIVE map
  • Plotting of data
  • Validation of data
  • Interpolation of data

The data model and format heavily utilze ASAM OpenDRIVE and ASAM Open-Simulation-Interface GroundTruth messages. omega-prime sets requirements on presence and quality of ASAM OSI GroundTruth messages and ASAM OpenDRIVE files and defines a file format the exchange and storage of such data.

Omega-Prime is the successor of the OMEGAFormat. It has the benefit that its definition is directly based on the established standards ASAM OSI and ASAM OpenDRIVE and carries over the data quality requirements and the data tooling from OMEGAFormat. Therefore, it should be easier to incorporate omega-prime into existing workflows and tooling.

To learn more about the example data read example_files/README.md. Example data was taken and created from esmini.

Installation

pip install omega-prime

Usage

A detailed introduction to the features and usage can be found in tutorial.ipynb

Create an omega-prime file from an OSI GroundTruth message trace and an OpenDRIVE map:

import omega_prime

r = omega_prime.Recording.from_file('example_files/pedestrian.osi', xodr_path='example_files/fabriksgatan.xodr')
r.to_mcap('example.mcap')

If you want to create an OSI trace on your own in python, check out the python library betterosi.

Read and plot an omega-prime file:

r = omega_prime.Recording.from_file('example.mcap')
ax = r.plot()

File Format

Based on MCAP, ASAM OSI and ASAM OpenDRIVE the ASAM OSI GroundTruth messages and ASAM OpenDRIVE map are packaged as shown in the following figure.