python-aidot-cameras

Control AIDOT WiFi lights and cameras from Python.

This extends the upstream lights-only python-aidot, which it installs as a dependency rather than forking. It adds live WebRTC video streaming (DTLS and SDES-SRTP paths), snapshots, PTZ, camera controls, cloud recordings/thumbnails, and two-way (push-to-talk) audio.

Upstream owns the aidot import name and handles non-camera devices (lights, plugs, switches) with none of this package's code in the path; everything here lives under aidot_cameras. Taking a new upstream release is a dependency bump plus a test run - see docs/UPSTREAM.md.

This repository is the library (distribution name python-aidot-cameras). The Home Assistant custom component (custom_components/aidot/) lives in the companion integration repo cbrightly/hass-aidot-cameras, which depends on this library.

Supported cameras

The streaming transport is auto-selected per camera from its model id:

• A000088 (M3 Pro) - DTLS-SRTP, wired/mains.
• A001513 ("L2") - SDES-SRTP, battery (woken on demand; validated end-to-end).
• A001064 (PTZ) - SDES-SRTP, wired/mains (role-reversal handshake).

Other battery models (A001108, A001360) are recognized in code with the same battery handling. See docs/CAMERAS.md for the authoritative table and per-model notes.

Known characteristics

Two behaviours that are measured, understood as far as the evidence allows, and not going to change in this release. Neither is a fault to report.

Recorded video is retrievable only from cloud storage. Whether a camera records to the cloud or to its own SD card is per-camera, not per-model, and the device reports it as IsSupportPlayback. This library lists cloud recordings (async_get_cloud_recordings) and resolves a playable HLS URL for one (async_get_event_video_media); it has no SD-card equivalent, so a camera storing to a card records normally and nothing here can play it back. On the reference fleet that is four of seven cameras. The vendor's own commands for it are identified but their responses have never been decoded; see docs/ROAD-TO-1.0.md item 6.

The A001064 (PTZ) streams at roughly 2.2 Mbps, about 24% above the vendor app. Measured from a capture of the app on the same camera: it takes about 1796 Kbps on HD and about 866 Kbps on SD. An earlier version of this note repeated a figure of 225-500 Kbps for the app - that was never measured here, and the capture contradicts it at both quality settings.

So the practical difference is a quarter more bandwidth at equivalent quality, plus a roughly 2:1 saving that the app's SD control achieves and this library's does not. The command sent here is byte-for-byte the app's, in-band and mid-session on the same transport, and it does not change the rate; the app's does. Streaming is correct either way and the cost is bandwidth, which matters on a metered or congested link.

Local (LAN) control and account ownership

Local control over the devices' TCP:10000 channel - both the light/plug protocol and this package's CameraLanClient - is accepted only for the account that owns the devices. A member of a shared home is rejected at the device, even though the cloud happily hands that member a full device list, complete with the per-device password and aesKey.

The rejection is easy to misread, because the device answers with a code that varies by firmware family and a message that blames the wrong thing:

The A001493's message is the honest one: it is the user id that does not match, not the password. Every credential in the request can be correct and the login will still be refused if the userId is not the owner's.

Verified 2026-08-08 against ten devices across four model families: every one returns 200 for the owning account and one of the codes above for a shared-home member.

If local control never engages, check which account the integration is signed in as before looking anywhere else. A dedicated or secondary login - the sort of thing you might use to avoid contending with a phone app over a rotating refresh token - will control everything fine through the cloud and never once log in locally.

Cameras' live video is unaffected either way: it is WebRTC signaled over cloud MQTT and does not use this path.

Library install

Install from PyPI (the simplest, recommended method):

# lights + camera cloud/control only:
pip install python-aidot-cameras
# add live WebRTC streaming, snapshots, and two-way audio:
pip install python-aidot-cameras[webrtc]

[webrtc] pulls in the extra dependencies (aiortc, av, ...) needed for live streaming, snapshots, and two-way audio. Without it you still get lights plus the camera cloud/control APIs, but not live media.

For the latest unreleased code, install straight from the GitHub repo instead:

# lights + camera cloud/control only:
pip install "git+https://github.com/cbrightly/python-aidot-cameras"
# add live WebRTC streaming, snapshots, and two-way audio:
pip install "python-aidot-cameras[webrtc] @ git+https://github.com/cbrightly/python-aidot-cameras"

Standalone CLI: aidot-go2rtc

Bridge a camera into go2rtc (or any RTSP/HTTP consumer) without Home Assistant. Installing the package provides the aidot-go2rtc console script; for an isolated tool install use pipx or uv:

pipx install "python-aidot-cameras[webrtc]"
# or:
uv tool install "python-aidot-cameras[webrtc]"

export AIDOT_USERNAME=... AIDOT_PASSWORD=...   # or AIDOT_TOKEN_FILE, see below
aidot-go2rtc --list                  # discover cameras + their transport

# Stream one camera. Pick the form that matches how you are running it:
aidot-go2rtc <device_id> -                              # DTLS: MPEG-TS to stdout
aidot-go2rtc <device_id> '{output}'                     # SDES: go2rtc exec: only
aidot-go2rtc <device_id> http://127.0.0.1:8555/cam.ts   # either: serve, then pull

'{output}' is a placeholder go2rtc substitutes; run by hand it is passed through as an RTSP push URL. Both transports can push, so {output} works on any camera - but on a DTLS one prefer -, which carries the mux's 48 kHz AAC untouched where the push has to transcode audio down to 8 kHz G.711.

ffmpeg must be on PATH. SDES cameras - two of the three validated models - stream entirely through an ffmpeg subprocess, and pip cannot install a system binary:

sudo apt install ffmpeg      # Debian/Ubuntu
brew install ffmpeg          # macOS

Authenticates via AIDOT_USERNAME/AIDOT_PASSWORD (AIDOT_COUNTRY, default US) - a dedicated login is recommended for long-running standalone use, so it doesn't fight Home Assistant over a shared rotating refresh token. Set AIDOT_TOKEN_FILE=/path/to/token.json to cache the login across restarts; token rotations are written back automatically. Run aidot-go2rtc --help for the full list of authentication and stream env vars.

Usage

Import from aidot_cameras, never from aidot. The upstream aidot package is a dependency of this one and its AidotClient is lights-only: importing from it gives you a client with no camera surface and no ImportError to tell you why.

Log in, find a camera, and open a stream:

import aiohttp
from aidot_cameras.client import AidotClient
from aidot_cameras.const import CONF_DEVICE_LIST, CONF_NAME

async with aiohttp.ClientSession() as http:
    client = AidotClient(http, country_code="US", username=..., password=...)
    await client.async_post_login()
    devices = (await client.async_get_all_device())[CONF_DEVICE_LIST]
    cam = next(d for d in devices if d.get(CONF_NAME) == "Front Door")
    device_client = client.get_device_client(cam)

get_device_client returns a CameraDeviceClient for a camera. Plain DeviceClient and LightDeviceClient are the lights clients and carry none of the camera surface, so a hasattr probe against the wrong one fails silently.

Open a live WebRTC stream:

session = await device_client.async_open_webrtc_stream(on_frame=cb, timeout=30.0)
# ... session.stop() when done

on_frame receives a PyAV av.VideoFrame - use pts / time_base / to_ndarray(). It is DTLS-only (A000088): SDES cameras (A001513, A001064) decode out of process, so on_frame never fires for them and no error is raised. For those, take the media as a file or a stream instead:

session = await device_client.async_open_webrtc_stream(
    output_path="/tmp/live.ts",                      # record, or
    rtsp_push_url="rtsp://127.0.0.1:8554/cam",       # push to go2rtc
)

Two-way (push-to-talk) audio:

session = await device_client.async_open_webrtc_stream(..., talk=True)
await session.async_start_talk(pcm_provider)   # provider() -> 320B s16le PCM (20ms @ 8kHz), or None
# ... speak ...
await session.async_stop_talk()

See docs/CAMERAS.md for the full camera API (streaming, snapshots, recordings, motion polling, two-way audio, and LAN-direct media).

Getting an RTSP URL

Want a plain rtsp:// URL for Frigate, an NVR, or VLC? You can have one, but not from this library alone: it does not run an RTSP server, and neither do the cameras - they have no RTSP and no ONVIF endpoint. The only way video leaves them is the cloud-signalled WebRTC handshake and SRTP decrypt this library does. Pair it with go2rtc and go2rtc publishes the RTSP URL for you.

Three steps, about five minutes.

1. List your cameras. The transport column decides one word in step 3, so keep the output around:

$ pip install "python-aidot-cameras[webrtc]"
$ export AIDOT_USERNAME='you@example.com' AIDOT_PASSWORD='...' AIDOT_COUNTRY=US
$ aidot-go2rtc --list
1a2b3c4d...  LK.IPC.A000088  DTLS (http-pull)
5e6f7a8b...  LK.IPC.A001064  SDES (rtsp-push)

2. Add one line per camera to go2rtc.yaml. Both forms make go2rtc the parent process, so it starts the stream on the first viewer and kills it when the last one leaves - nothing talks to your cameras while nobody is watching:

streams:
  driveway:  exec:aidot-go2rtc 1a2b3c4d... -          # DTLS camera
  frontdoor: exec:aidot-go2rtc 5e6f7a8b... {output}   # SDES camera

Use - for a DTLS camera and {output} for an SDES one - that is the whole difference, and --list told you which is which. ({output} is a placeholder go2rtc fills in with its own publish URL. It is not something you type at a shell; - is the form for that.) go2rtc needs the same AIDOT_* environment variables the CLI does, so set them wherever go2rtc starts.

3. Use the URL. go2rtc serves every stream you named at:

rtsp://<go2rtc-host>:8554/driveway

Check it before wiring anything up to it:

$ ffprobe rtsp://127.0.0.1:8554/driveway
Stream #0:0: Video: h264 (High), yuv420p, 1280x720, 15 fps
Stream #0:1: Audio: aac (LC), 48000 Hz, mono

Details worth knowing

• Which camera is which. --list reports the transport per device. DTLS is the mains A000088; SDES is the A001064 / A001513 family. Passing the wrong form is not silent - the CLI tells you which one to use and exits.
• Audio. The SDES {output} push carries G.711 audio alongside video; the DTLS - producer carries AAC (48 kHz mono, resampled from the camera's 8 kHz A-law, because 8 kHz AAC plays silent in a lot of browsers).
• A stream that starts with no video and picks it up a few seconds later is normal: the mux waits for a keyframe so the first GOP is decodable. A stream that stays audio-only is a camera that never sent one - retry the view.
• Skipping go2rtc. aidot-go2rtc <id> http://127.0.0.1:8555/cam.ts serves MPEG-TS on a listening socket instead, for a consumer that pulls rather than spawns. That process has to stay running to keep the port bound, so it holds a camera session whether or not anyone is watching. Prefer the exec: forms.
• Pushing to your own RTSP server rather than go2rtc: rtsp_push_url= from Python, or an rtsp:// output on the CLI. Both transports support it. A DTLS push transcodes audio to G.711 A-law, matching what SDES has always sent - ffmpeg's RTSP muxer will not accept the AAC that MPEG-TS carries. output_path= records to a file. Go2RtcClient.rtsp_url(name) builds the address above, and ensure_stream(name, source) registers a stream with a running go2rtc if you would rather not edit YAML.
• Home Assistant users need none of this. The integration manages go2rtc itself; this section is for standalone use.

Home Assistant component and CLI

The Home Assistant custom component (custom_components/aidot/) is not part of this library repo - it lives in the companion integration repo cbrightly/hass-aidot-cameras, which depends on this library. See that repo for installing the component (via HACS or by copying custom_components/aidot/).

Environment variables

The library reads the following environment variables.

Credentials

Used by the credential helper (aidot.credentials); they take priority over any stored credentials file. See aidot_cameras/credentials.py.

Camera streaming / tuning

The most useful knobs read by the camera client (aidot_cameras.camera.client). Defaults are chosen to work out of the box; override only when tuning. Finer-grained internal knobs (audio normalization, keyframe/PLI cadence, retry timing, SDES audio, idle release, the sprop cache path) are documented in docs/CAMERAS.md.

Security hardening

Opt-in knobs that tighten the camera transport. Defaults preserve current behavior (the firmware's signaling doesn't carry verifiable material, so strict modes are off until you pin a value); each emits a one-time warning when left at the permissive default.