TubeAmp

A retro-styled terminal music player that streams audio from YouTube. Think Winamp meets the terminal.

curl -fsSL https://raw.githubusercontent.com/tomekceszke/tubeamp/main/install.sh | bash

macOS and Linux. Installs mpv, ffmpeg and TubeAmp itself, showing every command that needs sudo and asking before it runs. Then type tubeamp.

Rather read it before you run it? Sensible:

curl -fsSL https://raw.githubusercontent.com/tomekceszke/tubeamp/main/install.sh -o install.sh
less install.sh && bash install.sh

Windows needs WSL2 first — see Installation. Prefer to do it by hand, or already have Homebrew or uv? Quick Start has the manual steps.

┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓
┃ ▆▆    ▁▁                            ║                                      ┃
┃ ██ ▁▁ ██    ▃▃                      ║ VOL: ███████████████████░░░░░  80%   ┃
┃ ██ ██ ██ ▂▂ ██    ▄▄                ║                                      ┃
┃ ██ ██ ██ ██ ██ ▅▅ ██    ▇▇    ▃▃    ║ ──────────────────────────────────   ┃
┃ ██ ██ ██ ██ ██ ██ ██ ██ ██ ▅▅ ██ ▂▂ ║ ┌─────┐┌─────┐┌─────┐ ┌─────┐┌─────┐ ┃
┃ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ║ │  ■  ││  ▶  ││  ‖  │ │  S  ││  R  │ ┃
┃ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ║ └─────┘└─────┘└─────┘ └─────┘└─────┘ ┃
┃────────────────────────────────────────────────────────────────────────────┃
┃ Around the World                                             2:34 / 7:09   ┃
┃                                                                            ┃
┃ █████████████████████████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░   ┃
┃                                                                            ┃
┃────────────────────────────────────────────────────────────────────────────┃
┃ ▶›  1. Around the World                                             7:09   ┃
┃     2. Da Funk                                                      5:28   ┃
┃     3. Revolution 909                                               5:26   ┃
┃     4. Burnin'                                                      6:49   ┃
┃     5. Rollin' & Scratchin'                                         7:27   ┃
┃                                                                            ┃
┃                                                                            ┃
┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛

Quick Start

The one-liner at the top does all of this for you. By hand, if you would rather:

# macOS — the formula pulls in mpv and ffmpeg for you
brew install tomekceszke/tap/tubeamp
tubeamp

# Linux — system libraries, a tool installer, then TubeAmp
sudo apt install mpv libmpv2 ffmpeg          # Debian/Ubuntu; see below for others
uv tool install tubeamp                      # or: pipx install tubeamp
tubeamp

Windows needs WSL2 first; see Installation.

Features

• Stream audio directly from YouTube (via yt-dlp + mpv)
• Real-time spectrum visualizer (offline FFT analysis, synced to playback)
• YouTube playlist import, search, and lazy-loading queue
• Full keyboard-driven TUI (via Textual)
• 10 dark themes, from CRT phosphor to editor classics (see below)
• Shuffle, repeat (off/all/one), and volume controls
• Configurable via TOML (~/.config/tubeamp/config.toml)

System Requirements

• Python 3.11+
• libmpv — Audio playback engine, loaded through ctypes (required)
• ffmpeg — Audio decoding for the spectrum visualizer (required)

yt-dlp is a Python dependency and is installed into the virtualenv, so it does not need to be installed system-wide. TubeAmp puts the virtualenv's bin directory on PATH at startup so mpv's ytdl_hook finds that copy rather than an older distribution package.

Installing Dependencies

# macOS — the mpv formula ships libmpv
brew install mpv ffmpeg

# Arch Linux — the mpv package ships libmpv
sudo pacman -S mpv ffmpeg

# Ubuntu/Debian — the mpv package does NOT pull the shared library in,
# and ensurepip lives in a separate package
sudo apt install mpv libmpv2 ffmpeg python3-venv

# Fedora
sudo dnf install mpv mpv-libs ffmpeg

Without the libmpv runtime package TubeAmp refuses to start and names the package to install for your system. ./install.sh handles all of this and verifies the result before finishing.

Installation

Nothing here is a binary you have to trust on faith. Every release is built from a tagged commit by a GitHub Actions workflow and published to PyPI through Trusted Publishing, so PyPI shows a Verified provenance marker linking each file back to the commit and the workflow run that produced it.

The install script

The one-liner at the top of this page runs install.sh, which is short enough to read in a minute and does exactly four things: finds a Python 3.11+, installs libmpv and ffmpeg through your own package manager, puts TubeAmp in its own virtualenv under ~/.local/share/tubeamp, and links it into ~/.local/bin.

It shows every command before running it and asks first — including the ones needing sudo, and before it touches your shell's startup file. It never installs Homebrew for you; on macOS without it, it stops and points you at brew.sh.

bash install.sh --dry-run     # print the whole plan, change nothing
bash install.sh --yes         # no questions, for scripts and the impatient
bash install.sh --uninstall   # remove it again, leaving ~/.config/tubeamp alone

Re-running it upgrades an existing install. The sections below are the same work done by hand, if you would rather not run someone else's script at all.

macOS

brew install tomekceszke/tap/tubeamp

The formula declares mpv and ffmpeg, so the system dependencies come along with it. No Homebrew? Install it from brew.sh first, or follow the Linux steps below, which work on macOS too. If playback stops working after a while, YouTube has most likely moved on from the pinned yt-dlp; brew upgrade tubeamp is the fix.

Linux, and macOS without Homebrew

First libmpv and ffmpeg from your package manager (see Installing Dependencies above). Then an installer for Python command-line tools, if you do not already have one — either works, and both keep TubeAmp in its own environment rather than mixed into your system Python:

curl -LsSf https://astral.sh/uv/install.sh | sh   # uv, read it first if you like
# or, from your package manager:
sudo apt install pipx

Then TubeAmp itself:

uv tool install tubeamp     # or: pipx install tubeamp
tubeamp

If tubeamp comes back as "command not found", the install directory is not on your PATH yet. Both tools install into ~/.local/bin; uv tool update-shell (or pipx ensurepath) adds it, and the change takes effect in a new terminal.

Upgrade with uv tool upgrade tubeamp — worth doing when a video refuses to play, since that is usually a stale yt-dlp.

Windows

Not supported natively: python-mpv loads libmpv-2.dll through ctypes, and the official mpv build for Windows does not ship that library. TubeAmp runs under WSL2 instead, where the Linux instructions apply unchanged and WSLg handles audio — but be aware that setting WSL2 up is its own detour, and it needs a reboot:

wsl --install          # in PowerShell as administrator, then reboot

After the reboot, in the Ubuntu shell:

curl -fsSL https://raw.githubusercontent.com/tomekceszke/tubeamp/main/install.sh | bash
tubeamp

From source

git clone https://github.com/tomekceszke/tubeamp.git
cd tubeamp
./install.sh
./run.sh

It is the same install.sh, and it notices the difference: run from a checkout it installs the working tree in editable mode into .venv instead of fetching a release, so your edits take effect without reinstalling. run.sh rebuilds that virtualenv if a Python upgrade has left its interpreter symlinks dangling.

First Run

TubeAmp starts with an empty playlist and lists what to press:

• / — search YouTube by artist or song, or paste a playlist or video URL
• h — every keybinding
• t — theme picker

To load a playlist automatically on startup, set youtube.default_playlist in ~/.config/tubeamp/config.toml.

Usage

tubeamp             # launch the player
tubeamp --version   # report the version without starting the TUI
tubeamp --help      # usage, config path, log path

./run.sh            # from a source checkout

Once running, press / to search YouTube or paste a playlist URL.

Keybindings

Configuration

Global config at ~/.config/tubeamp/config.toml (auto-created):

[audio]
volume = 80
quality = "bestaudio"

[visualizer]
backend = "analyzed"        # "analyzed" (FFT) or "simulated"
bars = 16
framerate = 30
sensitivity = 100           # percent gain on bar height

[youtube]
cookies_browser = ""        # "firefox", "chrome", etc.
default_playlist = ""       # auto-load on startup

[ui]
theme = "classic"

Working from a source checkout, a local.toml beside pyproject.toml overrides the global file — handy for a personal default playlist you do not want committed (it is in .gitignore). It is deliberately ignored anywhere else, so an installed tubeamp never picks up a stray local.toml from whatever directory you happen to be in. See local.toml.example.

Themes

Press t to open the picker; each row shows the palette and the player behind the dialog repaints as you move the highlight, so a theme is judged on the real UI. Esc puts the original back.

Every colour on screen comes from the theme, so a palette also sets the background, the frame and the spectrum gradient. A config naming a dropped theme still works: retro resolves to amber, monokai to dracula, and solarized-dark (like nord) to ayu.

Local overrides in local.toml (not committed, see local.toml.example).

Logging goes to ~/.config/tubeamp/tubeamp.log at INFO level; set TUBEAMP_LOG_LEVEL=DEBUG for per-frame detail.

Architecture

See ARCHITECTURE.md for detailed design documentation.

Development

# Install with dev dependencies
pip install -e ".[dev]"

# Install the pre-commit hooks
pre-commit install

# Lint, type-check, test
ruff check src/ tests/
mypy src/ tests/
pytest

See CONTRIBUTING.md before opening a pull request.

Disclaimer

TubeAmp is an independent project, not affiliated with, endorsed by or sponsored by YouTube, Google, Winamp or Llama Group. Winamp is referenced only to describe the kind of interface this takes after.

Streams are resolved with yt-dlp. Playing YouTube content outside the official clients may conflict with YouTube's Terms of Service — check what applies where you are, and use it for content you are entitled to access.

License

MIT