pylekiwi 0.9.0

Python package for controlling the LeKiwi robot

pylekiwi

Python package for controlling the LeKiwi robot.

Quick Start

Web UI

Log into the robot and run the following command:

ssh <your robot ip>
sudo chmod 666 <your_follower_robot_serial_port>
uvx pylekiwi webui --serial-port <your_follower_robot_serial_port>

Then, open a web browser and navigate to http://<your robot ip>:8080 to see the web UI.

Leader and Follower/Client Nodes

Run the following command to start the follower node (host) on the robot (Respberry Pi):

ssh <your robot ip>
sudo chmod 666 <your_follower_robot_serial_port>
uvx pylekiwi host --serial-port <your_follower_robot_serial_port>

Run the following command to start the leader node (client) on the remote machine:

sudo chmod 666 <your_leader_robot_serial_port>
uvx --from 'pylekiwi[client]' pylekiwi leader --serial-port <your_leader_robot_serial_port>
# Use rerun to view the camera frames
uvx --from 'pylekiwi[client]' pylekiwi leader --serial-port <your_leader_robot_serial_port>

Or use the following command to start the leader node (client) on the remote machine:

sudo chmod 666 <your_leader_robot_serial_port>
uvx pylekiwi client capture --camera base --output photo.jpg
uvx pylekiwi client pose go <name_or_angles>     # preset pose name or "10,20,30,40,50"
uvx pylekiwi client pose save <name>             # save current pose
uvx pylekiwi client pose list                    # list preset poses
uvx pylekiwi client pose delete <name>           # delete preset pose
uvx pylekiwi client grasp                        # grasp object
uvx pylekiwi client release                      # release object