Skip to main content

Alternative regular expression module, to replace re.

Project description

Introduction

This new regex implementation is intended eventually to replace Python’s current re module implementation.

For testing and comparison with the current ‘re’ module the new implementation is in the form of a module called ‘regex’.

Old vs new behaviour

This module has 2 behaviours:

  • Version 0 behaviour (old behaviour, compatible with the current re module):

    • Indicated by the VERSION0 or V0 flag, or (?V0) in the pattern.

    • Zero-width matches are handled like in the re module:

      • .split won’t split a string at a zero-width match.

      • .sub will advance by one character after a zero-width match.

    • Inline flags apply to the entire pattern, and they can’t be turned off.

    • Only simple sets are supported.

    • Case-insensitive matches in Unicode use simple case-folding by default.

  • Version 1 behaviour (new behaviour, different from the current re module):

    • Indicated by the VERSION1 or V1 flag, or (?V1) in the pattern.

    • Zero-width matches are handled like in Perl and PCRE:

      • .split will split a string at a zero-width match.

      • .sub will handle zero-width matches correctly.

    • Inline flags apply to the end of the group or pattern, and they can be turned off.

    • Nested sets and set operations are supported.

    • Case-insensitive matches in Unicode use full case-folding by default.

If no version is specified, the regex module will default to regex.DEFAULT_VERSION. In the short term this will be VERSION0, but in the longer term it will be VERSION1.

Case-insensitive matches in Unicode

The regex module supports both simple and full case-folding for case-insensitive matches in Unicode. Use of full case-folding can be turned on using the FULLCASE or F flag, or (?f) in the pattern. Please note that this flag affects how the IGNORECASE flag works; the FULLCASE flag itself does not turn on case-insensitive matching.

In the version 0 behaviour, the flag is off by default.

In the version 1 behaviour, the flag is on by default.

Nested sets and set operations

It’s not possible to support both simple sets, as used in the re module, and nested sets at the same time because of a difference in the meaning of an unescaped "[" in a set.

For example, the pattern [[a-z]--[aeiou]] is treated in the version 0 behaviour (simple sets, compatible with the re module) as:

  • Set containing “[” and the letters “a” to “z”

  • Literal “–”

  • Set containing letters “a”, “e”, “i”, “o”, “u”

but in the version 1 behaviour (nested sets, enhanced behaviour) as:

  • Set which is:

    • Set containing the letters “a” to “z”

  • but excluding:

    • Set containing the letters “a”, “e”, “i”, “o”, “u”

Version 0 behaviour: only simple sets are supported.

Version 1 behaviour: nested sets and set operations are supported.

Flags

There are 2 kinds of flag: scoped and global. Scoped flags can apply to only part of a pattern and can be turned on or off; global flags apply to the entire pattern and can only be turned on.

The scoped flags are: FULLCASE, IGNORECASE, MULTILINE, DOTALL, VERBOSE, WORD.

The global flags are: ASCII, BESTMATCH, ENHANCEMATCH, LOCALE, POSIX, REVERSE, UNICODE, VERSION0, VERSION1.

If neither the ASCII, LOCALE nor UNICODE flag is specified, it will default to UNICODE if the regex pattern is a Unicode string and ASCII if it’s a bytestring.

The ENHANCEMATCH flag makes fuzzy matching attempt to improve the fit of the next match that it finds.

The BESTMATCH flag makes fuzzy matching search for the best match instead of the next match.

Notes on named capture groups

All capture groups have a group number, starting from 1.

Groups with the same group name will have the same group number, and groups with a different group name will have a different group number.

The same name can be used by more than one group, with later captures ‘overwriting’ earlier captures. All of the captures of the group will be available from the captures method of the match object.

Group numbers will be reused across different branches of a branch reset, eg. (?|(first)|(second)) has only group 1. If capture groups have different group names then they will, of course, have different group numbers, eg. (?|(?P<foo>first)|(?P<bar>second)) has group 1 (“foo”) and group 2 (“bar”).

In the regex (\s+)(?|(?P<foo>[A-Z]+)|(\w+) (?P<foo>[0-9]+) there are 2 groups:

  • (\s+) is group 1.

  • (?P<foo>[A-Z]+) is group 2, also called “foo”.

  • (\w+) is group 2 because of the branch reset.

  • (?P<foo>[0-9]+) is group 2 because it’s called “foo”.

If you want to prevent (\w+) from being group 2, you need to name it (different name, different group number).

Multithreading

The regex module releases the GIL during matching on instances of the built-in (immutable) string classes, enabling other Python threads to run concurrently. It is also possible to force the regex module to release the GIL during matching by calling the matching methods with the keyword argument concurrent=True. The behaviour is undefined if the string changes during matching, so use it only when it is guaranteed that that won’t happen.

Building for 64-bits

If the source files are built for a 64-bit target then the string positions will also be 64-bit.

Unicode

This module supports Unicode 8.0.

Full Unicode case-folding is supported.

Additional features

The issue numbers relate to the Python bug tracker, except where listed as “Hg issue”.

  • Fixed support for pickling compiled regexes (Hg issue 195)

  • Added support for lookaround in conditional pattern (Hg issue 163)

    The test of a conditional pattern can now be a lookaround.

    Examples:

    >>> regex.match(r'(?(?=\d)\d+|\w+)', '123abc')
    <regex.Match object; span=(0, 3), match='123'>
    >>> regex.match(r'(?(?=\d)\d+|\w+)', 'abc123')
    <regex.Match object; span=(0, 6), match='abc123'>

    This is not quite the same as putting a lookaround in the first branch of a pair of alternatives.

    Examples:

    >>> print(regex.match(r'(?:(?=\d)\d+\b|\w+)', '123abc'))
    <regex.Match object; span=(0, 6), match='123abc'>
    >>> print(regex.match(r'(?(?=\d)\d+\b|\w+)', '123abc'))
    None

    In the first example, the lookaround matched, but the remainder of the first branch failed to match, and so the second branch was attempted, whereas in the second example, the lookaround matched, and the first branch failed to match, but the second branch was not attempted.

  • Added POSIX matching (leftmost longest) (Hg issue 150)

    The POSIX standard for regex is to return the leftmost longest match. This can be turned on using the POSIX flag ((?p)).

    Examples:

    >>> # Normal matching.
    >>> regex.search(r'Mr|Mrs', 'Mrs')
    <regex.Match object; span=(0, 2), match='Mr'>
    >>> regex.search(r'one(self)?(selfsufficient)?', 'oneselfsufficient')
    <regex.Match object; span=(0, 7), match='oneself'>
    >>> # POSIX matching.
    >>> regex.search(r'(?p)Mr|Mrs', 'Mrs')
    <regex.Match object; span=(0, 3), match='Mrs'>
    >>> regex.search(r'(?p)one(self)?(selfsufficient)?', 'oneselfsufficient')
    <regex.Match object; span=(0, 17), match='oneselfsufficient'>

    Note that it will take longer to find matches because when it finds a match at a certain position, it won’t return that immediately, but will keep looking to see if there’s another longer match there.

  • Added (?(DEFINE)...) (Hg issue 152)

    If there’s no group called “DEFINE”, then … will be ignored, but any group definitions within it will be available.

    Examples:

    >>> regex.search(r'(?(DEFINE)(?P<quant>\d+)(?P<item>\w+))(?&quant) (?&item)', '5 elephants')
    <regex.Match object; span=(0, 11), match='5 elephants'>
  • Added (*PRUNE), (*SKIP) and (*FAIL) (Hg issue 153)

    (*PRUNE) discards the backtracking info up to that point. When used in an atomic group or a lookaround, it won’t affect the enclosing pattern.

    (*SKIP) is similar to (*PRUNE), except that it also sets where in the text the next attempt to match will start. When used in an atomic group or a lookaround, it won’t affect the enclosing pattern.

    (*FAIL) causes immediate backtracking. (*F) is a permitted abbreviation.

  • Added \K (Hg issue 151)

    Keeps the part of the entire match after the position where \K occurred; the part before it is discarded.

    It does not affect what capture groups return.

    Examples:

    >>> m = regex.search(r'(\w\w\K\w\w\w)', 'abcdef')
    >>> m[0]
    'cde'
    >>> m[1]
    'abcde'
    >>>
    >>> m = regex.search(r'(?r)(\w\w\K\w\w\w)', 'abcdef')
    >>> m[0]
    'bc'
    >>> m[1]
    'bcdef'
  • Added capture subscripting for expandf and subf/subfn (Hg issue 133) (Python 2.6 and above)

    You can now use subscripting to get the captures of a repeated capture group.

    Examples:

    >>> m = regex.match(r"(\w)+", "abc")
    >>> m.expandf("{1}")
    'c'
    >>> m.expandf("{1[0]} {1[1]} {1[2]}")
    'a b c'
    >>> m.expandf("{1[-1]} {1[-2]} {1[-3]}")
    'c b a'
    >>>
    >>> m = regex.match(r"(?P<letter>\w)+", "abc")
    >>> m.expandf("{letter}")
    'c'
    >>> m.expandf("{letter[0]} {letter[1]} {letter[2]}")
    'a b c'
    >>> m.expandf("{letter[-1]} {letter[-2]} {letter[-3]}")
    'c b a'
  • Added support for referring to a group by number using (?P=...).

    This is in addition to the existing \g<...>.

  • Fixed the handling of locale-sensitive regexes.

    The LOCALE flag is intended for legacy code and has limited support. You’re still recommended to use Unicode instead.

  • Added partial matches (Hg issue 102)

    A partial match is one that matches up to the end of string, but that string has been truncated and you want to know whether a complete match could be possible if the string had not been truncated.

    Partial matches are supported by match, search, fullmatch and finditer with the partial keyword argument.

    Match objects have a partial attribute, which is True if it’s a partial match.

    For example, if you wanted a user to enter a 4-digit number and check it character by character as it was being entered:

    >>> pattern = regex.compile(r'\d{4}')
    
    >>> # Initially, nothing has been entered:
    >>> print(pattern.fullmatch('', partial=True))
    <regex.Match object; span=(0, 0), match='', partial=True>
    
    >>> # An empty string is OK, but it's only a partial match.
    >>> # The user enters a letter:
    >>> print(pattern.fullmatch('a', partial=True))
    None
    >>> # It'll never match.
    
    >>> # The user deletes that and enters a digit:
    >>> print(pattern.fullmatch('1', partial=True))
    <regex.Match object; span=(0, 1), match='1', partial=True>
    >>> # It matches this far, but it's only a partial match.
    
    >>> # The user enters 2 more digits:
    >>> print(pattern.fullmatch('123', partial=True))
    <regex.Match object; span=(0, 3), match='123', partial=True>
    >>> # It matches this far, but it's only a partial match.
    
    >>> # The user enters another digit:
    >>> print(pattern.fullmatch('1234', partial=True))
    <regex.Match object; span=(0, 4), match='1234'>
    >>> # It's a complete match.
    
    >>> # If the user enters another digit:
    >>> print(pattern.fullmatch('12345', partial=True))
    None
    >>> # It's no longer a match.
    
    >>> # This is a partial match:
    >>> pattern.match('123', partial=True).partial
    True
    
    >>> # This is a complete match:
    >>> pattern.match('1233', partial=True).partial
    False
  • * operator not working correctly with sub() (Hg issue 106)

    Sometimes it’s not clear how zero-width matches should be handled. For example, should .* match 0 characters directly after matching >0 characters?

    Most regex implementations follow the lead of Perl (PCRE), but the re module sometimes doesn’t. The Perl behaviour appears to be the most common (and the re module is sometimes definitely wrong), so in version 1 the regex module follows the Perl behaviour, whereas in version 0 it follows the legacy re behaviour.

    Examples:

    >>> # Version 0 behaviour (like re)
    >>> regex.sub('(?V0).*', 'x', 'test')
    'x'
    >>> regex.sub('(?V0).*?', '|', 'test')
    '|t|e|s|t|'
    
    >>> # Version 1 behaviour (like Perl)
    >>> regex.sub('(?V1).*', 'x', 'test')
    'xx'
    >>> regex.sub('(?V1).*?', '|', 'test')
    '|||||||||'
  • re.group() should never return a bytearray (issue #18468)

    For compatibility with the re module, the regex module returns all matching bytestrings as bytes, starting from Python 3.4.

    Examples:

    >>> # Python 3.4 and later
    >>> regex.match(b'.', bytearray(b'a')).group()
    b'a'
    
    >>> # Python 3.1-3.3
    >>> regex.match(b'.', bytearray(b'a')).group()
    bytearray(b'a')
  • Added capturesdict (Hg issue 86)

    capturesdict is a combination of groupdict and captures:

    groupdict returns a dict of the named groups and the last capture of those groups.

    captures returns a list of all the captures of a group

    capturesdict returns a dict of the named groups and lists of all the captures of those groups.

    Examples:

    >>> m = regex.match(r"(?:(?P<word>\w+) (?P<digits>\d+)\n)+", "one 1\ntwo 2\nthree 3\n")
    >>> m.groupdict()
    {'word': 'three', 'digits': '3'}
    >>> m.captures("word")
    ['one', 'two', 'three']
    >>> m.captures("digits")
    ['1', '2', '3']
    >>> m.capturesdict()
    {'word': ['one', 'two', 'three'], 'digits': ['1', '2', '3']}
  • Allow duplicate names of groups (Hg issue 87)

    Group names can now be duplicated.

    Examples:

    >>> # With optional groups:
    >>>
    >>> # Both groups capture, the second capture 'overwriting' the first.
    >>> m = regex.match(r"(?P<item>\w+)? or (?P<item>\w+)?", "first or second")
    >>> m.group("item")
    'second'
    >>> m.captures("item")
    ['first', 'second']
    >>> # Only the second group captures.
    >>> m = regex.match(r"(?P<item>\w+)? or (?P<item>\w+)?", " or second")
    >>> m.group("item")
    'second'
    >>> m.captures("item")
    ['second']
    >>> # Only the first group captures.
    >>> m = regex.match(r"(?P<item>\w+)? or (?P<item>\w+)?", "first or ")
    >>> m.group("item")
    'first'
    >>> m.captures("item")
    ['first']
    >>>
    >>> # With mandatory groups:
    >>>
    >>> # Both groups capture, the second capture 'overwriting' the first.
    >>> m = regex.match(r"(?P<item>\w*) or (?P<item>\w*)?", "first or second")
    >>> m.group("item")
    'second'
    >>> m.captures("item")
    ['first', 'second']
    >>> # Again, both groups capture, the second capture 'overwriting' the first.
    >>> m = regex.match(r"(?P<item>\w*) or (?P<item>\w*)", " or second")
    >>> m.group("item")
    'second'
    >>> m.captures("item")
    ['', 'second']
    >>> # And yet again, both groups capture, the second capture 'overwriting' the first.
    >>> m = regex.match(r"(?P<item>\w*) or (?P<item>\w*)", "first or ")
    >>> m.group("item")
    ''
    >>> m.captures("item")
    ['first', '']
  • Added fullmatch (issue #16203)

    fullmatch behaves like match, except that it must match all of the string.

    Examples:

    >>> print(regex.fullmatch(r"abc", "abc").span())
    (0, 3)
    >>> print(regex.fullmatch(r"abc", "abcx"))
    None
    >>> print(regex.fullmatch(r"abc", "abcx", endpos=3).span())
    (0, 3)
    >>> print(regex.fullmatch(r"abc", "xabcy", pos=1, endpos=4).span())
    (1, 4)
    >>>
    >>> regex.match(r"a.*?", "abcd").group(0)
    'a'
    >>> regex.fullmatch(r"a.*?", "abcd").group(0)
    'abcd'
  • Added subf and subfn (Python 2.6 and above)

    subf and subfn are alternatives to sub and subn respectively. When passed a replacement string, they treat it as a format string.

    Examples:

    >>> regex.subf(r"(\w+) (\w+)", "{0} => {2} {1}", "foo bar")
    'foo bar => bar foo'
    >>> regex.subf(r"(?P<word1>\w+) (?P<word2>\w+)", "{word2} {word1}", "foo bar")
    'bar foo'
  • Added expandf to match object (Python 2.6 and above)

    expandf is an alternative to expand. When passed a replacement string, it treats it as a format string.

    Examples:

    >>> m = regex.match(r"(\w+) (\w+)", "foo bar")
    >>> m.expandf("{0} => {2} {1}")
    'foo bar => bar foo'
    >>>
    >>> m = regex.match(r"(?P<word1>\w+) (?P<word2>\w+)", "foo bar")
    >>> m.expandf("{word2} {word1}")
    'bar foo'
  • Detach searched string

    A match object contains a reference to the string that was searched, via its string attribute. The match object now has a detach_string method that will ‘detach’ that string, making it available for garbage collection (this might save valuable memory if that string is very large).

    Example:

    >>> m = regex.search(r"\w+", "Hello world")
    >>> print(m.group())
    Hello
    >>> print(m.string)
    Hello world
    >>> m.detach_string()
    >>> print(m.group())
    Hello
    >>> print(m.string)
    None
  • Characters in a group name (issue #14462)

    A group name can now contain the same characters as an identifier. These are different in Python 2 and Python 3.

  • Recursive patterns (Hg issue 27)

    Recursive and repeated patterns are supported.

    (?R) or (?0) tries to match the entire regex recursively. (?1), (?2), etc, try to match the relevant capture group.

    (?&name) tries to match the named capture group.

    Examples:

    >>> regex.match(r"(Tarzan|Jane) loves (?1)", "Tarzan loves Jane").groups()
    ('Tarzan',)
    >>> regex.match(r"(Tarzan|Jane) loves (?1)", "Jane loves Tarzan").groups()
    ('Jane',)
    
    >>> m = regex.search(r"(\w)(?:(?R)|(\w?))\1", "kayak")
    >>> m.group(0, 1, 2)
    ('kayak', 'k', None)

    The first two examples show how the subpattern within the capture group is reused, but is _not_ itself a capture group. In other words, "(Tarzan|Jane) loves (?1)" is equivalent to "(Tarzan|Jane) loves (?:Tarzan|Jane)".

    It’s possible to backtrack into a recursed or repeated group.

    You can’t call a group if there is more than one group with that group name or group number ("ambiguous group reference"). For example, (?P<foo>\w+) (?P<foo>\w+) (?&foo)? has 2 groups called “foo” (both group 1) and (?|([A-Z]+)|([0-9]+)) (?1)? has 2 groups with group number 1.

    The alternative forms (?P>name) and (?P&name) are also supported.

  • repr(regex) doesn’t include actual regex (issue #13592)

    The repr of a compiled regex is now in the form of a eval-able string. For example:

    >>> r = regex.compile("foo", regex.I)
    >>> repr(r)
    "regex.Regex('foo', flags=regex.I | regex.V0)"
    >>> r
    regex.Regex('foo', flags=regex.I | regex.V0)

    The regex module has Regex as an alias for the ‘compile’ function.

  • Improve the repr for regular expression match objects (issue #17087)

    The repr of a match object is now a more useful form. For example:

    >>> regex.search(r"\d+", "abc012def")
    <regex.Match object; span=(3, 6), match='012'>
  • Python lib re cannot handle Unicode properly due to narrow/wide bug (issue #12729)

    The source code of the regex module has been updated to support PEP 393 (“Flexible String Representation”), which is new in Python 3.3.

  • Full Unicode case-folding is supported.

    In version 1 behaviour, the regex module uses full case-folding when performing case-insensitive matches in Unicode.

    Examples (in Python 3):

    >>> regex.match(r"(?iV1)strasse", "stra\N{LATIN SMALL LETTER SHARP S}e").span()
    (0, 6)
    >>> regex.match(r"(?iV1)stra\N{LATIN SMALL LETTER SHARP S}e", "STRASSE").span()
    (0, 7)

    In version 0 behaviour, it uses simple case-folding for backward compatibility with the re module.

  • Approximate “fuzzy” matching (Hg issue 12, Hg issue 41, Hg issue 109)

    Regex usually attempts an exact match, but sometimes an approximate, or “fuzzy”, match is needed, for those cases where the text being searched may contain errors in the form of inserted, deleted or substituted characters.

    A fuzzy regex specifies which types of errors are permitted, and, optionally, either the minimum and maximum or only the maximum permitted number of each type. (You cannot specify only a minimum.)

    The 3 types of error are:

    • Insertion, indicated by “i”

    • Deletion, indicated by “d”

    • Substitution, indicated by “s”

    In addition, “e” indicates any type of error.

    The fuzziness of a regex item is specified between “{” and “}” after the item.

    Examples:

    • foo match “foo” exactly

    • (?:foo){i} match “foo”, permitting insertions

    • (?:foo){d} match “foo”, permitting deletions

    • (?:foo){s} match “foo”, permitting substitutions

    • (?:foo){i,s} match “foo”, permitting insertions and substitutions

    • (?:foo){e} match “foo”, permitting errors

    If a certain type of error is specified, then any type not specified will not be permitted.

    In the following examples I’ll omit the item and write only the fuzziness:

    • {i<=3} permit at most 3 insertions, but no other types

    • {d<=3} permit at most 3 deletions, but no other types

    • {s<=3} permit at most 3 substitutions, but no other types

    • {i<=1,s<=2} permit at most 1 insertion and at most 2 substitutions, but no deletions

    • {e<=3} permit at most 3 errors

    • {1<=e<=3} permit at least 1 and at most 3 errors

    • {i<=2,d<=2,e<=3} permit at most 2 insertions, at most 2 deletions, at most 3 errors in total, but no substitutions

    It’s also possible to state the costs of each type of error and the maximum permitted total cost.

    Examples:

    • {2i+2d+1s<=4} each insertion costs 2, each deletion costs 2, each substitution costs 1, the total cost must not exceed 4

    • {i<=1,d<=1,s<=1,2i+2d+1s<=4} at most 1 insertion, at most 1 deletion, at most 1 substitution; each insertion costs 2, each deletion costs 2, each substitution costs 1, the total cost must not exceed 4

    You can also use “<” instead of “<=” if you want an exclusive minimum or maximum:

    • {e<=3} permit up to 3 errors

    • {e<4} permit fewer than 4 errors

    • {0<e<4} permit more than 0 but fewer than 4 errors

    By default, fuzzy matching searches for the first match that meets the given constraints. The ENHANCEMATCH flag will cause it to attempt to improve the fit (i.e. reduce the number of errors) of the match that it has found.

    The BESTMATCH flag will make it search for the best match instead.

    Further examples to note:

    • regex.search("(dog){e}", "cat and dog")[1] returns "cat" because that matches "dog" with 3 errors, which is within the limit (an unlimited number of errors is permitted).

    • regex.search("(dog){e<=1}", "cat and dog")[1] returns " dog" (with a leading space) because that matches "dog" with 1 error, which is within the limit (1 error is permitted).

    • regex.search("(?e)(dog){e<=1}", "cat and dog")[1] returns "dog" (without a leading space) because the fuzzy search matches " dog" with 1 error, which is within the limit (1 error is permitted), and the (?e) then makes it attempt a better fit.

    In the first two examples there are perfect matches later in the string, but in neither case is it the first possible match.

    The match object has an attribute fuzzy_counts which gives the total number of substitutions, insertions and deletions.

    >>> # A 'raw' fuzzy match:
    >>> regex.fullmatch(r"(?:cats|cat){e<=1}", "cat").fuzzy_counts
    (0, 0, 1)
    >>> # 0 substitutions, 0 insertions, 1 deletion.
    
    >>> # A better match might be possible if the ENHANCEMATCH flag used:
    >>> regex.fullmatch(r"(?e)(?:cats|cat){e<=1}", "cat").fuzzy_counts
    (0, 0, 0)
    >>> # 0 substitutions, 0 insertions, 0 deletions.
  • Named lists (Hg issue 11)

    \L<name>

    There are occasions where you may want to include a list (actually, a set) of options in a regex.

    One way is to build the pattern like this:

    >>> p = regex.compile(r"first|second|third|fourth|fifth")

    but if the list is large, parsing the resulting regex can take considerable time, and care must also be taken that the strings are properly escaped if they contain any character that has a special meaning in a regex, and that if there is a shorter string that occurs initially in a longer string that the longer string is listed before the shorter one, for example, “cats” before “cat”.

    The new alternative is to use a named list:

    >>> option_set = ["first", "second", "third", "fourth", "fifth"]
    >>> p = regex.compile(r"\L<options>", options=option_set)

    The order of the items is irrelevant, they are treated as a set. The named lists are available as the .named_lists attribute of the pattern object :

    >>> print(p.named_lists)
    {'options': frozenset({'second', 'fifth', 'fourth', 'third', 'first'})}
  • Start and end of word

    \m matches at the start of a word.

    \M matches at the end of a word.

    Compare with \b, which matches at the start or end of a word.

  • Unicode line separators

    Normally the only line separator is \n (\x0A), but if the WORD flag is turned on then the line separators are the pair \x0D\x0A, and \x0A, \x0B, \x0C and \x0D, plus \x85, \u2028 and \u2029 when working with Unicode.

    This affects the regex dot ".", which, with the DOTALL flag turned off, matches any character except a line separator. It also affects the line anchors ^ and $ (in multiline mode).

  • Set operators

    Version 1 behaviour only

    Set operators have been added, and a set [...] can include nested sets.

    The operators, in order of increasing precedence, are:

    • || for union (“x||y” means “x or y”)

    • ~~ (double tilde) for symmetric difference (“x~~y” means “x or y, but not both”)

    • && for intersection (“x&&y” means “x and y”)

    • -- (double dash) for difference (“x–y” means “x but not y”)

    Implicit union, ie, simple juxtaposition like in [ab], has the highest precedence. Thus, [ab&&cd] is the same as [[a||b]&&[c||d]].

    Examples:

    • [ab] # Set containing ‘a’ and ‘b’

    • [a-z] # Set containing ‘a’ .. ‘z’

    • [[a-z]--[qw]] # Set containing ‘a’ .. ‘z’, but not ‘q’ or ‘w’

    • [a-z--qw] # Same as above

    • [\p{L}--QW] # Set containing all letters except ‘Q’ and ‘W’

    • [\p{N}--[0-9]] # Set containing all numbers except ‘0’ .. ‘9’

    • [\p{ASCII}&&\p{Letter}] # Set containing all characters which are ASCII and letter

  • regex.escape (issue #2650)

    regex.escape has an additional keyword parameter special_only. When True, only ‘special’ regex characters, such as ‘?’, are escaped.

    Examples:

    >>> regex.escape("foo!?")
    'foo\\!\\?'
    >>> regex.escape("foo!?", special_only=True)
    'foo!\\?'
  • Repeated captures (issue #7132)

    A match object has additional methods which return information on all the successful matches of a repeated capture group. These methods are:

    • matchobject.captures([group1, ...])

      • Returns a list of the strings matched in a group or groups. Compare with matchobject.group([group1, ...]).

    • matchobject.starts([group])

      • Returns a list of the start positions. Compare with matchobject.start([group]).

    • matchobject.ends([group])

      • Returns a list of the end positions. Compare with matchobject.end([group]).

    • matchobject.spans([group])

      • Returns a list of the spans. Compare with matchobject.span([group]).

    Examples:

    >>> m = regex.search(r"(\w{3})+", "123456789")
    >>> m.group(1)
    '789'
    >>> m.captures(1)
    ['123', '456', '789']
    >>> m.start(1)
    6
    >>> m.starts(1)
    [0, 3, 6]
    >>> m.end(1)
    9
    >>> m.ends(1)
    [3, 6, 9]
    >>> m.span(1)
    (6, 9)
    >>> m.spans(1)
    [(0, 3), (3, 6), (6, 9)]
  • Atomic grouping (issue #433030)

    (?>...)

    If the following pattern subsequently fails, then the subpattern as a whole will fail.

  • Possessive quantifiers.

    (?:...)?+ ; (?:...)*+ ; (?:...)++ ; (?:...){min,max}+

    The subpattern is matched up to ‘max’ times. If the following pattern subsequently fails, then all of the repeated subpatterns will fail as a whole. For example, (?:...)++ is equivalent to (?>(?:...)+).

  • Scoped flags (issue #433028)

    (?flags-flags:...)

    The flags will apply only to the subpattern. Flags can be turned on or off.

  • Inline flags (issue #433024, issue #433027)

    (?flags-flags)

    Version 0 behaviour: the flags apply to the entire pattern, and they can’t be turned off.

    Version 1 behaviour: the flags apply to the end of the group or pattern, and they can be turned on or off.

  • Repeated repeats (issue #2537)

    A regex like ((x|y+)*)* will be accepted and will work correctly, but should complete more quickly.

  • Definition of ‘word’ character (issue #1693050)

    The definition of a ‘word’ character has been expanded for Unicode. It now conforms to the Unicode specification at http://www.unicode.org/reports/tr29/. This applies to \w, \W, \b and \B.

  • Groups in lookahead and lookbehind (issue #814253)

    Groups and group references are permitted in both lookahead and lookbehind.

  • Variable-length lookbehind

    A lookbehind can match a variable-length string.

  • Correct handling of charset with ignore case flag (issue #3511)

    Ranges within charsets are handled correctly when the ignore-case flag is turned on.

  • Unmatched group in replacement (issue #1519638)

    An unmatched group is treated as an empty string in a replacement template.

  • ‘Pathological’ patterns (issue #1566086, issue #1662581, issue #1448325, issue #1721518, issue #1297193)

    ‘Pathological’ patterns should complete more quickly.

  • Flags argument for regex.split, regex.sub and regex.subn (issue #3482)

    regex.split, regex.sub and regex.subn support a ‘flags’ argument.

  • Pos and endpos arguments for regex.sub and regex.subn

    regex.sub and regex.subn support ‘pos’ and ‘endpos’ arguments.

  • ‘Overlapped’ argument for regex.findall and regex.finditer

    regex.findall and regex.finditer support an ‘overlapped’ flag which permits overlapped matches.

  • Unicode escapes (issue #3665)

    The Unicode escapes \uxxxx and \Uxxxxxxxx are supported.

  • Large patterns (issue #1160)

    Patterns can be much larger.

  • Zero-width match with regex.finditer (issue #1647489)

    regex.finditer behaves correctly when it splits at a zero-width match.

  • Zero-width split with regex.split (issue #3262)

    Version 0 behaviour: a string won’t be split at a zero-width match.

    Version 1 behaviour: a string will be split at a zero-width match.

  • Splititer

    regex.splititer has been added. It’s a generator equivalent of regex.split.

  • Subscripting for groups

    A match object accepts access to the captured groups via subscripting and slicing:

    >>> m = regex.search(r"(?P<before>.*?)(?P<num>\d+)(?P<after>.*)", "pqr123stu")
    >>> print m["before"]
    pqr
    >>> print m["num"]
    123
    >>> print m["after"]
    stu
    >>> print len(m)
    4
    >>> print m[:]
    ('pqr123stu', 'pqr', '123', 'stu')
  • Named groups

    Groups can be named with (?<name>...) as well as the current (?P<name>...).

  • Group references

    Groups can be referenced within a pattern with \g<name>. This also allows there to be more than 99 groups.

  • Named characters

    \N{name}

    Named characters are supported. (Note: only those known by Python’s Unicode database are supported.)

  • Unicode codepoint properties, including scripts and blocks

    \p{property=value}; \P{property=value}; \p{value} ; \P{value}

    Many Unicode properties are supported, including blocks and scripts. \p{property=value} or \p{property:value} matches a character whose property property has value value. The inverse of \p{property=value} is \P{property=value} or \p{^property=value}.

    If the short form \p{value} is used, the properties are checked in the order: General_Category, Script, Block, binary property:

    • Latin, the ‘Latin’ script (Script=Latin).

    • Cyrillic, the ‘Cyrillic’ script (Script=Cyrillic).

    • BasicLatin, the ‘BasicLatin’ block (Block=BasicLatin).

    • Alphabetic, the ‘Alphabetic’ binary property (Alphabetic=Yes).

    A short form starting with Is indicates a script or binary property:

    • IsLatin, the ‘Latin’ script (Script=Latin).

    • IsCyrillic, the ‘Cyrillic’ script (Script=Cyrillic).

    • IsAlphabetic, the ‘Alphabetic’ binary property (Alphabetic=Yes).

    A short form starting with In indicates a block property:

    • InBasicLatin, the ‘BasicLatin’ block (Block=BasicLatin).

    • InCyrillic, the ‘Cyrillic’ block (Block=Cyrillic).

  • POSIX character classes

    [[:alpha:]]; [[:^alpha:]]

    POSIX character classes are supported. These are normally treated as an alternative form of \p{...}.

    The exceptions are alnum, digit, punct and xdigit, whose definitions are different from those of Unicode.

    [[:alnum:]] is equivalent to \p{posix_alnum}.

    [[:digit:]] is equivalent to \p{posix_digit}.

    [[:punct:]] is equivalent to \p{posix_punct}.

    [[:xdigit:]] is equivalent to \p{posix_xdigit}.

  • Search anchor

    \G

    A search anchor has been added. It matches at the position where each search started/continued and can be used for contiguous matches or in negative variable-length lookbehinds to limit how far back the lookbehind goes:

    >>> regex.findall(r"\w{2}", "abcd ef")
    ['ab', 'cd', 'ef']
    >>> regex.findall(r"\G\w{2}", "abcd ef")
    ['ab', 'cd']
    • The search starts at position 0 and matches 2 letters ‘ab’.

    • The search continues at position 2 and matches 2 letters ‘cd’.

    • The search continues at position 4 and fails to match any letters.

    • The anchor stops the search start position from being advanced, so there are no more results.

  • Reverse searching

    Searches can now work backwards:

    >>> regex.findall(r".", "abc")
    ['a', 'b', 'c']
    >>> regex.findall(r"(?r).", "abc")
    ['c', 'b', 'a']

    Note: the result of a reverse search is not necessarily the reverse of a forward search:

    >>> regex.findall(r"..", "abcde")
    ['ab', 'cd']
    >>> regex.findall(r"(?r)..", "abcde")
    ['de', 'bc']
  • Matching a single grapheme

    \X

    The grapheme matcher is supported. It now conforms to the Unicode specification at http://www.unicode.org/reports/tr29/.

  • Branch reset

    (?|...|...)

    Capture group numbers will be reused across the alternatives, but groups with different names will have different group numbers.

    Examples:

    >>> regex.match(r"(?|(first)|(second))", "first").groups()
    ('first',)
    >>> regex.match(r"(?|(first)|(second))", "second").groups()
    ('second',)

    Note that there is only one group.

  • Default Unicode word boundary

    The WORD flag changes the definition of a ‘word boundary’ to that of a default Unicode word boundary. This applies to \b and \B.

  • SRE engine do not release the GIL (issue #1366311)

    The regex module can release the GIL during matching (see the above section on multithreading).

    Iterators can be safely shared across threads.

Project details


Release history Release notifications | RSS feed

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

regex-2016.05.15.tar.gz (580.8 kB view details)

Uploaded Source

Built Distributions

regex-2016.05.15-cp35-none-win_amd64.whl (236.1 kB view details)

Uploaded CPython 3.5Windows x86-64

regex-2016.05.15-cp35-none-win32.whl (230.2 kB view details)

Uploaded CPython 3.5Windows x86

regex-2016.05.15-cp34-none-win_amd64.whl (236.3 kB view details)

Uploaded CPython 3.4Windows x86-64

regex-2016.05.15-cp34-none-win32.whl (230.2 kB view details)

Uploaded CPython 3.4Windows x86

regex-2016.05.15-cp33-none-win_amd64.whl (236.1 kB view details)

Uploaded CPython 3.3Windows x86-64

regex-2016.05.15-cp33-none-win32.whl (230.0 kB view details)

Uploaded CPython 3.3Windows x86

regex-2016.05.15-cp32-none-win_amd64.whl (235.1 kB view details)

Uploaded CPython 3.2Windows x86-64

regex-2016.05.15-cp32-none-win32.whl (229.2 kB view details)

Uploaded CPython 3.2Windows x86

regex-2016.05.15-cp31-none-win_amd64.whl (235.1 kB view details)

Uploaded CPython 3.1Windows x86-64

regex-2016.05.15-cp31-none-win32.whl (229.3 kB view details)

Uploaded CPython 3.1Windows x86

regex-2016.05.15-cp27-none-win_amd64.whl (235.2 kB view details)

Uploaded CPython 2.7Windows x86-64

regex-2016.05.15-cp27-none-win32.whl (229.2 kB view details)

Uploaded CPython 2.7Windows x86

regex-2016.05.15-cp26-none-win_amd64.whl (235.1 kB view details)

Uploaded CPython 2.6Windows x86-64

regex-2016.05.15-cp26-none-win32.whl (229.1 kB view details)

Uploaded CPython 2.6Windows x86

regex-2016.05.15-cp25-none-win_amd64.whl (233.1 kB view details)

Uploaded CPython 2.5Windows x86-64

regex-2016.05.15-cp25-none-win32.whl (227.8 kB view details)

Uploaded CPython 2.5Windows x86

File details

Details for the file regex-2016.05.15.tar.gz.

File metadata

  • Download URL: regex-2016.05.15.tar.gz
  • Upload date:
  • Size: 580.8 kB
  • Tags: Source
  • Uploaded using Trusted Publishing? No

File hashes

Hashes for regex-2016.05.15.tar.gz
Algorithm Hash digest
SHA256 011b88a97ad6abd29d85791a4a6d98c10dc3e5d3d039e6cf52f2e979185cf9e4
MD5 c66cb973c79c430928071920972d4bd4
BLAKE2b-256 f76a801b97dac8d55d9337bb746650d4a2d9cf73107df7b94df0d1b00289cb77

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp35-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp35-none-win_amd64.whl
Algorithm Hash digest
SHA256 61f630fe260b0fee8a3a1dd080baeabe2eaa390cc63985a1f4f3004534f12d8e
MD5 ff664bb89fcf61ac0c2c49a138526377
BLAKE2b-256 0c2f359f1fdf6552529e0dff5bba2073eeb40ffed0f865bdf3a3a82027b05b81

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp35-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp35-none-win32.whl
Algorithm Hash digest
SHA256 1176b7c99facd16350a185856ce85caffc6c7426daa6df7c1dc3cf4a55d3d7d9
MD5 5d4504c3a57d7c253784d715b7cdbd52
BLAKE2b-256 6438fe583ddbee6762f0cf90c2c6a82c9f2ba8ea222966ded2b243ffc681b9d5

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp34-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp34-none-win_amd64.whl
Algorithm Hash digest
SHA256 365f3eed582b91b94a5b457fa925013600662d848d3f5657733a85b1e3d72d0b
MD5 4718de273723bc943ac47d1d9907684c
BLAKE2b-256 37bbe2583a815ed478104c09559a16194460fe1d5f6dc130edc816b7fdf4ec6c

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp34-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp34-none-win32.whl
Algorithm Hash digest
SHA256 9a08617b90431832a207c51af4717f0fa2e9580c70df5ad3f8a247c80ea5f0e4
MD5 89cc53880d65c9a69d5375aec9826024
BLAKE2b-256 c7b6cf3274b2c4e48eae00036af2b70a6a71ebcce6d7d6af798db15c5e35e061

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp33-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp33-none-win_amd64.whl
Algorithm Hash digest
SHA256 70b9952b9aafdb2df6325736cff5eefbe5a09821cdb34af9d73d36af01f97c21
MD5 3202a36f79ae7264acf86c44a8cc10f5
BLAKE2b-256 9d89a1865926bd7ad685d0f852626455d2d11ff2879124e264c28465bd46ffc7

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp33-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp33-none-win32.whl
Algorithm Hash digest
SHA256 c63828615f2711e3590c5431f434db34148b88d0125935604bb13ff791495284
MD5 17639d77dbd02bbe08189fb2c138cb9d
BLAKE2b-256 92dab4e98e5cd26a8011a103733e06cc870cc404077424f9c0871ef01e906eac

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp32-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp32-none-win_amd64.whl
Algorithm Hash digest
SHA256 9c5860e7b6fc4febb24a7b9437ba106776fd9290fca90d622d5ece2e42d8fc14
MD5 99b540952e64317b39ec5a1f25e0a5b8
BLAKE2b-256 f18d26e3e2e25a841a9765587bc7b8455cc581af25acd099968c2918b6eea698

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp32-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp32-none-win32.whl
Algorithm Hash digest
SHA256 d5f1dc398b6b1695333d69d1e1d21ed871dfb75f71c8c62e0cb07752002576fa
MD5 5a6465904e6c509816131458e90c1dab
BLAKE2b-256 1659c84205b7368452195f9493eb0ce05ec51d0fb19ded7a48f731bf1751908d

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp31-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp31-none-win_amd64.whl
Algorithm Hash digest
SHA256 5eccd2c57f57551e8555cd6c01c686eddfb9f35dc9de82c3e5539041a2416694
MD5 770a52d0add77303cce6090d7dc2387e
BLAKE2b-256 3a6f8a8dcd1140ae1bb68ed08c5484ed151930b30fa2b6c995507fa549abfde3

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp31-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp31-none-win32.whl
Algorithm Hash digest
SHA256 162c0727ca4f03c5380d091e0d5bffc839c4a692c4c9ef948ed0b9b81cad9e43
MD5 e412eb354d1cdee0b48275b147228f78
BLAKE2b-256 45735aca5a9b0cc7420e66cdd9e4a86fdcd17b1f7ad6f3aaf0ec9a26eaa68b73

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp27-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp27-none-win_amd64.whl
Algorithm Hash digest
SHA256 0e24eaa02231937ea65f55b54dccc38fef876318f1eb861c18bd4b9c18c59e81
MD5 44eb04d216799cfcabe53a31945eaf88
BLAKE2b-256 ec99e9228cb0a0614e6df0583e9b1324de074498335ae45e74c43acfc8f16a15

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp27-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp27-none-win32.whl
Algorithm Hash digest
SHA256 8edcf1b8d42d432792be56034f1aa5937a4dc9ade2555dd52928ebff0f86459a
MD5 998b4a50a4abb6dfd6da4037c5a0930a
BLAKE2b-256 8d5f17f263ff9e1286a3a851cf5f7ebb95a5bccf4e41a0469e215469a40ba928

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp26-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp26-none-win_amd64.whl
Algorithm Hash digest
SHA256 9ac43fb2c8e54c4c7de00522a1324c0f04105d2aca64c332e2454a0e9cdc3e95
MD5 66931d92f704075011e37aad89cdf2f6
BLAKE2b-256 4fd32b386d40dc2517b62eb4e7e9d2f6f01a2ad5f08c1942e3dfe2bbf21727a6

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp26-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp26-none-win32.whl
Algorithm Hash digest
SHA256 781b63cefd5ca7c8624ccff2922f0c3b3ef11d5535831d3f191c54bf4bb940d9
MD5 003390bb6b67e0675f97f55a7851981a
BLAKE2b-256 5457f160647f5fd96ac18366916c04e26639a8a057af9b82d8a8f5a39f3b1df4

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp25-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp25-none-win_amd64.whl
Algorithm Hash digest
SHA256 41d6005b35ab444bf47abaed84dc0d67eb4ad396cd906a322e1250a48aa8eaec
MD5 0ca75793a3d3bbf87da5cfb6840bdf27
BLAKE2b-256 72a4e6a518bd7a5820e646952ca3644c969035fed4781fc50a93f9111e4bbc39

See more details on using hashes here.

File details

Details for the file regex-2016.05.15-cp25-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.05.15-cp25-none-win32.whl
Algorithm Hash digest
SHA256 351a34475951c235c669d8ff87263ed2fae4153d40ce450c926bc36422d5dd85
MD5 19816991624d20666de1cce71b4ebf52
BLAKE2b-256 6aead0d7404454c65d22541800f3983e8fcc6d6fffdea332ac4716013da41b70

See more details on using hashes here.

Supported by

AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Pingdom Monitoring Sentry Error logging StatusPage Status page