Pyroute2 is a pure Python networking framework. The core requires only Python stdlib, no 3rd party libraries. The library was started as an RTNL protocol implementation, so the name is pyroute2, but now it supports several protocols, including non-netlink. Here are some supported netlink families and protocols:
dhcp — dynamic host configuration protocol for IPv4
9p2000 — Plan9 file system protocol
Netlink:
rtnl, network settings — addresses, routes, traffic controls
nfnetlink — netfilter API
ipq — simplest userspace packet filtering, iptables QUEUE target
devlink — manage and monitor devlink-enabled hardware
generic — generic netlink families
uevent — same uevent messages as in udev
Netfilter API:
ipset — IP sets
nftables — packet filtering
nfct — connection tracking
Generic netlink:
ethtool — low-level network interface setup
wireguard — VPN setup
nl80211 — wireless functions API (basic support)
taskstats — extended process statistics
acpi_events — ACPI events monitoring
thermal_events — thermal events monitoring
VFS_DQUOT — disk quota events monitoring
On the low level the library provides socket objects with an extended API. The additional functionality aims to:
Help to open/bind netlink sockets
Discover generic netlink protocols and multicast groups
Construct, encode and decode netlink and PF_ROUTE messages
Supported systems
Pyroute2 runs natively on Linux and emulates some limited subset of RTNL netlink API on BSD systems on top of PF_ROUTE notifications and standard system tools.
Other platforms are not supported.
IPRoute – synchronous RTNL API
Low-level IPRoute utility — Linux network configuration, this class is almost a 1-to-1 RTNL mapping. There are no implicit interface lookups and so on.
Get notifications about network settings changes:
from pyroute2 import IPRoute
with IPRoute() as ipr:
ipr.bind() # <--- start listening for RTNL broadcasts
for message in ipr.get(): # receive the broadcasts
print(message)More examples:
from socket import AF_INET
from pyroute2 import IPRoute
# get access to the netlink socket
ipr = IPRoute()
# no monitoring here -- thus no bind()
# print interfaces
for link in ipr.get_links():
print(link)
# create VETH pair and move v0p1 to netns 'test'
ipr.link('add', ifname='v0p0', peer='v0p1', kind='veth')
# wait for the devices:
peer, veth = ipr.poll(
ipr.link, 'dump', timeout=5, ifname=lambda x: x in ('v0p0', 'v0p1')
)
ipr.link('set', index=peer['index'], net_ns_fd='test')
# bring v0p0 up and add an address
ipr.link('set', index=veth['index'], state='up')
ipr.addr('add', index=veth['index'], address='10.0.0.1', prefixlen=24)
# release Netlink socket
ip.close()AsyncIPRoute – asynchronous RTNL API
While IPRoute provides a synchronous RTNL API, it is actually build around the asyncio-based core.
The same example as above can look like that:
import asyncio
from pyroute2 import AsyncIPRoute
async def main():
# get access to the netlink socket
ipr = AsyncIPRoute()
# print interfaces
async for link in await ipr.get_links():
print(link)
# create VETH pair and move v0p1 to netns 'test'
await ipr.link('add', ifname='v0p0', peer='v0p1', kind='veth')
# wait for the devices:
peer, veth = await ipr.poll(
ipr.link, 'dump', timeout=5, ifname=lambda x: x in ('v0p0', 'v0p1')
)
await ipr.link('set', index=peer['index'], net_ns_fd='test')
...
ipr.close()
asyncio.run(main())Please notice that .close() is synchronous in any case.
Network namespace management
from pyroute2 import netns
# create netns
netns.create('test')
# list
print(netns.listnetns())
# remove netns
netns.remove('test')Create veth interfaces pair and move to netns:
from pyroute2 import IPRoute
with IPRoute() as ipr:
# create interface pair
ipr.link('add', ifname='v0p0', kind='veth', peer='v0p1')
# wait for the peer
(peer,) = ipr.poll(ipr.link, 'dump', timeout=5, ifname='v0p1')
# move the peer to the 'test' netns:
ipr.link('set', index=peer['index'], net_ns_fd='test')List interfaces in some netns:
from pyroute2 import IPRoute
with IPRoute(netns='test') as ipr:
for link in ipr.get_links():
print(link)More details and samples see in the documentation.
NDB – high level RTNL API
Key features:
Data integrity
Transactions with commit/rollback changes
State synchronization
Multiple sources, including netns and remote systems
A “Hello world” example:
from pyroute2 import NDB
with NDB() as ndb:
with ndb.interfaces['eth0'] as eth0:
# set one parameter
eth0.set(state='down')
eth0.commit() # make sure that the interface is down
# or multiple parameters at once
eth0.set(ifname='hello_world!', state='up')
eth0.commit() # rename, bring up and wait for success
# --> <-- here you can be sure that the interface is up & renamedInstallation
Using pypi:
pip install pyroute2Using git:
pip install git+https://github.com/svinota/pyroute2.gitUsing source, requires make and nox
git clone https://github.com/svinota/pyroute2.git
cd pyroute2
make installRequirements
Python >= 3.9
Links
1 maintainer
Release files for pyroute2 0.9.1
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | |
|---|---|---|---|
| pyroute2-0.9.1.tar.gz | 466.7 kB | Details |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Reset |
|---|---|---|---|---|
| pyroute2-0.9.1-py3-none-any.whl | Python 3 | none | any | Details |
Total release size:936.0 kB
Release files / pyroute2-0.9.1.tar.gz
| Download URL | pyroute2-0.9.1.tar.gz |
|---|---|
| Size | 466.7 kB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
5934612ad87a334a2ab3da97090979b46d713427deebfbd34c586dc60a1fd3d5
|
|
BLAKE2b-256 checksum How to use checksums |
7e43f15919d050879cda50c8989956f92992709b21e62015cdab6add9e9a4299
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/6.1.0 CPython/3.10.16
|
Release files / pyroute2-0.9.1-py3-none-any.whl
| Download URL | pyroute2-0.9.1-py3-none-any.whl |
|---|---|
| Size | 469.3 kB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
237b86529f88d2552656247691c165f7569459953b389eac539a7ec721f8202b
|
|
BLAKE2b-256 checksum How to use checksums |
0ddf288ce4ac4daf902c42af23a9838e5a6bec41f564126c80df6746f49a2dcb
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/6.1.0 CPython/3.10.16
|
